3. If the telephone is charged while switched on,
the battery indicator begins to go up.
4. The battery is fully charged when the battery
indicator no longer goes up.
5. Disconnect the charger from the network and
from the device when it is no longer needed!
Note: The initial charging of the battery should take at
least 12 hours. During the charging, the telephone and
charger will become warm. That is completely normal.
Switching the telephone on/off:
1. Press and hold the red key for 1-2 seconds in
order to switch on the telephone.
2. If the PIN code is activated, the phone will now
prompt you for your PIN code; please enter it
and confirm your entry with OK
3. Please select your language and confirm your
selection with OK
4. Press and hold the red key for 1-2 seconds in
order to switch off the telephone.
Device code
The use of this code can prevent unauthorized
persons from using this telephone. The factory default
code is: 0000
Lock screen
In order to unlock the keylock, select unlock (left menu
button) and press the red key within 2.0 seconds.
