GB
Your new TWICE by BABYNURSE is a safety seat designed to protect your baby in the car from the day
they are born to approximately 1 years of age (up to 13 Kg in weight).
TWICE has passed the demanding safety tests of European Regulation ECE 44/04 for groups 0 and
0+.
TWICE is compatible with most car seats. However, when the car manufacturer states that the seats
are suitable for the installation of “Universal” type seats, this means that there is total compatibility.
You can also use your TWICE with any of the BABYNURSE chassis that has the PRO-FIX system.
GENERAL INSTRUCTIONS
In order to protect your baby adequately and to
ensure their comfort and stability in the car, the
following instructions must be strictly followed:
Your TWICE safety seat can be installed in both •
the front seat, if it does not have an airbag, and
in the back seat of your car. Either way, we advise
you to install it in the back seat. If you position it
in the front seat of the car, this must NOT have an
AIRBAG, or the airbag must be disconnected
It is only suitable for cars fitted with three anchoring •
point automatic belts, approved according to
Regulation ECE-16 or other equivalent rules. DO
NOT use with a two anchoring point belt.
Not all safety systems are exactly the same, so •
we advise that you check your TWICE in the car in
which it is going to be fitted.
It is very important not to use second-hand •
products, as BABYNURSE can only guarantee
complete safety with items used by their first
buyer.
BABYNURSE recommends that you replace your •
TWICE safety seat with a new one if it has been
subjected to violent stresses in an accident.
Check that all the belts are in their correct •
position and properly adjusted to your TWICE.
Ensure that no belt is coiled.
For your baby’s proper development, we advise •
you not to over-use the safety seat in the
seated position on long journeys. Let the baby
rest frequently in a Moses basket or bed in the
reclining position.
1 Getting to know the TWICE safety seat
Your TWICE safety seat has been designed taking
into account the latest advances in terms of
safety and it has been tested under the toughest
conditions. It has the following features:
Installing in the vehicle:
Belt slots underneath the shell to permit •
installation in cars where the belts are shorter. It
also leaves the area around the baby’s feet free.
New anchorages for the reclining position to help •
with installation.
Comfort and safety for the baby:
Integrated 5-point straps, with a greater fastening •
area, so distributing loads on the baby better in
the event of an accident.
Aeration in the shell to permit transpiration.•
Impact-absorbent material over the entire surface •
in contact with the baby.
4-position reclining backrest:•
