462767

Baumatic BDW13 Handleiding

36
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
BDW13 &
BDW14 DISHWASHER
60CM FULL HEIGHT DISHWASHER
20/02/05
IMPORTANT!
PLEASE READ THIS MANUAL AND KEEP IT FOR FUTURE REFERENCE!
THIS MANUAL CONTAINS SECTIONS OF SAFETY INSTRUCTIONS, OPERATING
INSTRUCTIONS & TROUBLESHOOTING TIPS, ETC.
BAUMATIC BDW13, BDW14 dishwasher user manual
2
2
BEFORE CALLING
FOR SERVICE
REVIEWING THE SECTION ON
TROUBLESHOOTING TIPS WILL
HELP YOU SOLVE SOME
COMMON PROBLEMS WITHOUT
THE NEED TO ASK FOR HELP
FROM PROFESSIONAL
TECHNICIANS.
PLEASE NOTE:
THE MANUFACTURER
RESERVES THE RIGHT TO MAKE
MODIFICATIONS TO PRODUCTS
WITHOUT GIVING PRIOR
NOTICE.
CONTENTS
• SAFETY FIRST!
SAFETY INFORMATION .……………..…………3
*Please read this before using your dishwasher!
• KNOWING YOUR
DISHWASHER
CONTROL PANEL ………………………..……..…4
DISHWASHER FEATURES …………..………….4
• USING YOUR
DISHWASHER
WATER SOFTENER …………………..………...5-6
DETERGENT ………………..............................6
RINSE AID ………………….............................7
LOADING YOUR DISHWASHER…..….......8-11
STARTING A WASH CYCLE ……………….12-14
UNLOADING AT THE END OF A CYCLE…....15
FILTERING SYSTEM ………………..…….…….16
CLEANING AND MAINTAINING
YOUR DISHWASHER …………………….…16-18
• BEFORE YOU CALL FOR
SERVICE…
TROUBLESHOOTING ………………….…19-23
ERROR CODES……………………………….…..24
• MISCELLANEOUS
CHARACTERISTICS ………….………….……...25
HOW TO INSTALL ……….…….…..……....26-33
FINAL CHECKLIST BEFORE STARTING…….34
CONDITIONS OF GUARANTEE………………..35
CONTACT DETAILS…………………………..…..36
BAUMATIC BDW13, BDW14 dishwasher user manual
3
3
IMPORTANT SAFETY INFORMATION
READ BEFORE USING!
ELECTRICAL SAFETY
• NOTE
- This appliance must be grounded. In
the event of a malfunction or breakdown,
grounding will reduce the risk of electric
shock by providing a path of least resistance
of electrical current. You will be able to tell if
it is because a non-grounded appliance will
give off an electrical discharge.
• Manufacturer declines all responsibility for
any damage due to non-grounding of
appliance.
• DURING THE GUARANTEE PERIOD ONLY BAUMATIC
SERVICE ENGINEERS OR AN AUTHORISED AGENT
OF BAUMATIC SHOULD CARRY OUT REPAIRS ON
THIS UNIT.
• DO NOT USE IF THE SUPPLY CORD IS DAMAGED.
• FOR INSTALLATION PROCEDURE PLEASE CONSULT
PAGES 26 – 33.
BEFORE USING
SOME ITEMS ARE UNSUITABLE FOR WASHING
IN YOUR DISHWASHER. PLEASE SEE PAGE 8 FOR A LIST
OF THESE ITEMS.
DO NOT TAMPER WITH THE CONTROLS.
WHEN LOADING ITEMS TO BE WASHED:
1) Keep sharp items like knives away from the door
seal.
2) Load sharp knives with the handles up to prevent
injuries.
ONLY USE AUTOMATIC DISHWASHER
DETERGENT, NOT SOAP OR LAUNDRY DETERGENT.
NEVER USE SOLVENTS AS THIS COULD RESULT IN AN
EXPLOSION!
CHILD SAFETY
• DO NOT ABUSE OR FORCE THE
DISHWASHER. DO NOT SIT ON OR STAND
ON ITS DOOR OR DISH RACKS – TIPPING
HAZARD.
• KEEP CHILDREN AWAY FROM DETERGENT,
RINSE AID AND THE OPEN DOOR OF THE
DISHWASHER AS THERE COULD BE
DETERGENT LEFT INSIDE.
• SUPERVISE YOUNG CHILDREN TO ENSURE
THEY DO NOT PLAY WITH THE APPLIANCE.
• SUPERVISE INFIRM PERSONS IF THEY MUST
USE THE APPLIANCE.
• REMOVE THE DOOR TO WASHING
COMPARTMENT OF YOUR OLD APPLIANCE
BEFORE DISCARDING IT.
DURING USE
• DO NOT TOUCH THE HEATING ELEMENT
DURING OR IMMEDIATELY AFTER USE.
• DO NOT USE YOUR DISHWASHER UNLESS
ALL ENCLOSURE PANELS ARE PROPERLY
IN PLACE. OPEN THE DOOR VERY
CAREFULLY IF THE DISHWASHER IS
OPERATING. THERE IS A RISK OF WATER
SQUIRTING OUT.
AFTER USE
• ALWAYS KEEP THE DOOR CLOSED TO AVOID DANGER
OF TRIPPING.
• CHECK THAT THE DETERGENT DISPENSER IS EMPTY
AFTER COMPLETION OF WASH CYCLE.
• IF LEAVING UNUSED FOR A LONG TIME,
DISCONNECT THE WATER SUPPLY (SEE PP. 18, 30).
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY BEFORE
USING YOUR DISHWASHER FOR THE FIRST TIME!
BAUMATIC BDW13, BDW14 dishwasher user manual
4
4
CONTROL PANEL
NOTE: YOUR DISHWASHER’S CONTROL PANEL IS ON THE TOP LIP OF THE DOOR. IF
YOUR APPLIANCE IS BEING INSTALLED UNDER A WORKTOP, YOU WILL NEED TO OPEN
THE DOOR TO SEE THE CONTROL PANEL.
1 Program Indicator Light: when you select a washing program, the corresponding light will display.
2 Program Key: Press to select a washing program. Multiple presses select different programs. See page 13 for
how to program the washing cycle you want.
3 Salt and Rinse Aid Warning Light: Comes on when the softener or rinse aid dispenser needs refilling. Note
that when you first use your dishwasher, the salt & rinse aid lights do not go out immediately
.
4 Half Washing Light: Comes on when you select the ‘Half wash’ option.
5 Half Washing Key: Press to select ‘Half wash’ program. *(Optional half washing means that the lower
spray arm does not run, so you should load the upper basket only).
6 Delay Start Time: Displays the delay start time, the water temperature & ERROR CODES (see p. 24).
7 Delay Key: Press this key to set the delay start time. You can delay starting your washing cycle up to 24 hours.
One press on this delays the start of the washing cycle by one hour.
8 Power On light: Comes on when the ‘ON / OFF’ Button is pressed down.
9 ON / OFF Button: Turns the power supply on and off.
NOTE: YOUR DISHWASHER CAN RUN A TEST CYCLE. THIS HAPPENS WHEN YOU PRESS EITHER THE PROGRAM KEY OR THE DELAY
TIMER KEY BEFORE PRESSING THE ON / OFF BUTTON. WHEN THIS HAPPENS, YOUR DISHWASHER WILL NOT RUN BUT WILL ENTER THIS
TEST CYCLE INSTEAD. PLEASE SEE PAGE 19 (TROUBLESHOOTING SECTION) FOR MORE INFORMATION AND HOW TO CORRECT IT.
DISHWASHER FEATURES
1 ADJUSTABLE UPPER BASKET
2 SPRAY ARMS
3 LOWER BASKET
4 WATER SOFTENER
5 MAIN FILTER
6 DETERGENT DISPENSER
7 CUP & GLASS SHELF
(ADJUSTABLE)
8 CUTLERY BASKET
9 COARSE FILTER
10 RINSE AID DISPENSER
11 DRAIN PIPE CONNECTOR
12 INLET PIPE CONNECTOR
BAUMATIC BDW13, BDW14 dishwasher user manual
5
5
WATER
SOFTENING
FEATURE
THE LIME IN HARD WATER MAKES DEPOSITS FORM ON
DISHES AND UTENSILS. YOUR DISHWASHER HAS A
SPECIAL SOFTENING FEATURE THAT USES SALT
SPECIFICALLY DESIGNED TO ELIMINATE LIME AND
MINERALS FROM THE WATER
.
WARNING!
ONLY USE DISHWASHER SALT IN YOUR
DISHWASHER.
NOTE:
IF YOU USE 3-IN-1 OR 2-IN-1 TABLETS, BE
SURE NOT TO ADD SALT AND/OR RINSE AID
TO THE APPLIANCE AS THESE TABLET
TYPES ALREADY CONTAIN SALT AND/OR
RINSE AID. ADDING SALT AND RINSE AID
TO YOUR DISHWASHER’S COMPARTMENTS
IN A CYCLE INVOLVING A 3-IN-1 OR 2-IN-1
TABLET WILL RESULT IN OVERDOSING OF
INDIVIDUAL CHEMICALS AND MAY CAUSE
OVERFLOWING OF WATER AND SUDS.
LOADING SALT INTO THE SALT CONTAINER
• REMOVE THE LOWER BASKET & THEN
UNSCREW AND REMOVE THE CAP
FROM THE SALT CONTAINER.
• IF YOU ARE FILLING THE CONTAINER
FOR THE FIRST TIME, FILL WITH
APPROX. 1 LITRE OF WATER.
• PLACE THE END OF THE SUPPLIED
FUNNEL INTO THE HOLE & ADD 1.2 Kg
OF SALT. NOTE
: IT IS NORMAL FOR A
SMALL AMOUNT OF WATER TO COME
OUT OF THE CONTAINER.
Note on chemicals used by the dishwasher
• Your dishwasher is equipped with an adjustable rinse aid and salt container. Using individual detergents,
rinse aid and salt will give the best possible results as this will give the correct dosage of each chemical to
suit your needs. Using Two-in-One or Three-in-One tablets may not give the best results when used in
your appliance, and may not be suitable for the type of water supply in your home, as they contain pre-
determined quantities of salt, rinse aid and detergent and cannot be adjusted to the individual
requirements.
If you are going to use 3-in-1 (or 2-in-1) tablets, we suggest that you contact the manufacturer before use
or if you experience poor results in the wash performance and ask for assistance from them.
BAUMATIC BDW13, BDW14 dishwasher user manual
6
6
SETTING THE WATER SOFTENER LEVEL
YOU CAN ADJUST THE AMOUNT OF SALT USED BY THE DISHWASHER TO SOFTEN WATER TO GET
THE BEST WASHING RESULTS, BASED ON THE HARDNESS OF WATER IN YOUR AREA.
1 UNSCREW THE CAP FROM THE SALT
CONTAINER.
2 THERE IS A RING ON THE NECK OF THE
CONTAINER. ROTATE THE RING IN AN
ANTICLOCKWISE DIRECTION FROM THE “-”
SETTING TOWARDS THE “+” SETTING
ACCORDING TO THE HARDNESS OF WATER
IN USE. SEE TABLE BELOW.
NOTE
1. THE SALT CONTAINER MUST BE REFILLED WHEN THE
SALT WARNING LIGHT COMES ON. ALTHOUGH THE
SALT CONTAINER MAY BE FULL, THE INDICATOR LIGHT
MAY NOT GO OUT UNTIL THE SALT HAS DISSOLVED.
2. IF THERE ARE SALT SPILLS, A SOAK PROGRAM CAN
BE RUN TO WASH AWAY SPILLAGE BEFORE USING THE
MACHINE.
3. CLEAR ANY SALT GRANULES AWAY FROM THE
CONTAINER OPENING.
ADJUSTMENTS SHOULD BE MADE ACCORDING TO THE TABLE BELOW:
DETERGENT “How much do I use?”
To OPEN the DETERGENT DISPENSER DOOR, use the CATCH on its LOWER SIDE.
*NOTE: SEE P.13 – WASH CYCLE TABLE for AMOUNT of DETERGENT to use.
NOTE:
• ALWAYS CHECK THE WASH CYCLE TABLE
FOR DOSAGE ADVICE. NEVER OVERFILL
THE DISPENSER.
• DO NOT OVERDOSE TO PREVENT THE
FORMATION OF DEPOSITS (THE WATER
SOFTENING FEATURE ALREADY TAKES CARE
OF THIS!).
THE HARDER YOUR WATER, THE MORE DETERGENT
YOU MAY NEED. ADJUST THE DOSE JUST BY SMALL
AMOUNTS UNTIL YOU FIND THE CORRECT AMOUNT
OF DETERGENT TO USE.
BAUMATIC BDW13, BDW14 dishwasher user manual
7
7
RINSE AID
• TO OPEN THE DISPENSER, TURN THE CAP TO
THE ‘OPEN’ (LEFT) ARROW AND LIFT IT OUT.
• POUR THE RINSE AID INTO THE DISPENSER.
BE CAREFUL NOT TO OVERFILL.
• REPLACE CAP BY INSERTING IT ALIGNED WITH
‘OPEN’ ARROW & TURN IT TO THE CLOSED
(RIGHT) ARROW.
• THE RINSE AID IS RELEASED DURING THE
FINAL RINSE TO PREVENT WATER FROM
FORMING DROPLETS ON YOUR DISHES
THAT CAN CAUSE SPOTS AND STREAKS. IT
ALSO IMPROVES DRYING BY ALLOWING
WATER TO FALL OFF THE DISHES.
• YOUR DISHWASHER IS DESIGNED TO USE
LIQUID RINSE AIDS. THE RINSE AID
DISPENSER CAN BE FOUND INSIDE THE
DOOR NEXT TO THE DETERGENT
DISPENSER. TO FILL THE DISPENSER, OPEN
THE CAP AND POUR THE RINSE AID INTO
THE DISPENSER UNTIL THE LEVEL
INDICATOR TURNS COMPLETELY BLACK.
THE DISPENSER HOLDS ABOUT 100ML OF
LIQUID RINSE AID.
• BE CAREFUL NOT TO OVERFILL THE
DISPENSER – THIS COULD CAUSE
FROTHING. WIPE AWAY SPILLS WITH A
DAMP CLOTH. DON’T FORGET TO REPLACE
THE CAP BEFORE YOU CLOSE THE
DISHWASHER DOOR.
NOTE
: IF YOU HAVE SOFT WATER, YOU MAY NOT
NEED RINSE AID FOR IT MAY CAUSE A WHITE FILM
TO DEVELOP ON YOUR DISHES.
ADJUSTING THE RINSE AID DISPENSER
•
As with detergent, the amount of rinse
aid needed for your dishes depends on
the hardness of the water in your area.
Too much rinse aid can result in
foaming and cause cloudiness or
streaks on your dishes. If your water
is very soft, you may not need rinse
aid. You can always dilute the rinse
aid with an equal amount of water.
The rinse aid dispenser has six settings. ALWAYS START WITH THE DISPENSER SET ON “1”. IF SPOTS & POOR
DRYING ARE A PROBLEM, INCREASE THE AMOUNT OF RINSE AID DISPENSED BY REMOVING THE DISPENSER
LID AND ROTATING THE DIAL TO “2”. IF THE DISHES ARE STILL NOT DRYING PROPERLY OR ARE SPOTTED,
ADJUST THE DIAL TO THE NEXT HIGHER NUMBER UNTIL YOUR DISHES ARE SPOT-FREE.
***
NOTE: Please read the notes for detergent use on p. 13.
WHEN TO REFILL THE RINSE
AID DISPENSER - If the rinse aid
warning light (
SEE control panel) is not on, you
can judge the rinse aid level by looking at the
black dot on the rinse aid dispenser. As the
rinse aid level decreases, the black dot shrinks.
Never let the rinse aid get below ¼ full.
BAUMATIC BDW13, BDW14 dishwasher user manual
8
8
LOADING
YOUR
DISHWASHER
NOTE:
FOR BEST PERFORMANCE, FOLLOW THESE
LOADING GUIDELINES. FEATURES AND
APPEARANCE OF RACKS & CUTLERY
BASKETS MAY VARY FROM YOUR MODEL.
BEFORE LOADING!
• REMOVE ALL SCRAPS OF FOOD.
• EMPTY DRINKS & LIQUIDS FROM CUPS.
• SOFTEN BURNT-ON FOOD IN PANS BY SOAKING.
DO NOT PUT THESE ITEMS IN YOUR DISHWASHER:
•
BRONZE
CUTLERY
• SAUCEPANS
WITH
WOODEN
HANDLES
• CUTLERY
WITH
WOODEN,
HORN, CHINA
OR MOTHER
OF PEARL
HANDLES
• PLASTIC
ITEMS THAT
ARE NOT HEAT
RESISTANT
• OLDER
CUTLERY
WITH GLUED
PARTS
• BONDED
CUTLERY
ITEMS OR
DISHES
• PEWTER OR
COPPER ITEMS
• LEAD CRYSTAL
GLASS
• STEEL ITEMS
SUBJECT TO
RUSTING
• WOODEN
PLATTERS
• ITEMS MADE
FROM
SYNTHETIC
FIBRES (eg.
SPONGES)
• DELICATE,
REPAIRED OR
PAINT /
PATTERN
OVERLAID
CHINA
Note:
Do not wash stainless steel and silver cutlery together. Iron objects can rust
and stain other items. Aluminium tends to go black. Copper, pewter & brass
stain.
BAUMATIC BDW13, BDW14 dishwasher user manual
9
9
HOW TO USE THE UPPER RACK
THE UPPER RACK IS FOR MORE DELICATE
AND LIGHTER DISHWARE SUCH AS
GLASSES, COFFEE & TEA CUPS, SAUCERS,
PLATES, BOWLS, AND SHALLOW PANS
(PROVIDED THESE ARE NOT TOO DIRTY).
POSITION THE DISHES AND
COOKWARE SO THAT THEY DO NOT
GET MOVED BY THE SPRAY OF
WATER. ALWAYS PLACE GLASSES,
CUPS & BOWLS UPSIDE DOWN.
NOTE:
YOUR DISHWASHER COMES WITH AN
ADJUSTABLE TOP RACK (BASKET) –
PICTURED AT RIGHT. ITS HEIGHT CAN
BE ADJUSTED BY UNDOING THE FRONT
RAIL CLIPS, REMOVING THE RACK
COMPLETELY AND LATCHING THE
WHEELS OF THE LOWER LEVEL
(POSITION ‘1’ IN THE FIGURE ON THE RIGHT)
OR THE HIGHER LEVEL (POSITION ‘2’ IN
THE FIGURE ON THE RIGHT)
IN THE GROOVE
OF THE RAIL.
PLEASE NOTE: WHEN THE UPPER
BASKET IS IN THE FULLY RAISED
POSITION THE MAXIMUM PLATE SIZE
THAT CAN BE ACCOMODATED IS 28
CM.
LOADING GUIDE (UPPER RACK):
2
3
4
5
6
7
1
1
2
1 Cups
2 Small
Serving
Bowls
3 Large
Serving
Bowls
4 Glasses
5 Saucers
6 Dishes
7 Plates
BAUMATIC BDW13, BDW14 dishwasher user manual
10
10
***NOTE***: THE UPPER RACK HAS
SIDE FLAPS (PICTURED AT LEFT ABOVE BASKET).
THERE ARE 4 (2 ON EACH SIDE).
THESE CAN BE ADJUSTED INTO 2
POSITIONS = POSITION 1 (HIGH)
AND POSITION 2 (LOW).
TO MOVE THE FLAPS BETWEEN THESE
POSITIONS, FIND THE LARGE HINGES
CLASPING EACH FLAP TO THE UPPER
RACK. THERE ARE TWO OF THESE AT
EITHER END OF EACH FLAP. GENTLY PULL
BOTH CLASPS OFF THE WIRE RACK AND
MOVE THE FLAP TO THE DESIRED
POSITION. BE CAREFUL IF YOU HAVE
LONG FINGERNAILS!
POSITION 1
THE UPPER POSITION WILL ACCOMMODATE ITEMS SUCH AS GLASS TUMBLERS
(PLACED BENEATH FLAP) AND WINE GLASSES. WINE GLASSES CAN BE PLACED
UPSIDE DOWN SO THAT THE NECK NESTLES SNUGLY IN THE GROOVES AT SIDE OF
FLAP WITH THE BASE OF THE GLASS FACING UPWARD.
POSITION 2
WHEN THE FLAPS ARE MOVED TO THE LOWER POSITION, THEY CAN BE USED TO
HOLD ADDITIONAL TUMBLERS, CUPS AND MUGS. ALWAYS CHECK THAT YOU ARE
ONLY PLACING ITEMS ON THE FLAPS THAT WILL CLEAR THE CEILING HEIGHT OF
YOUR DISHWASHER WHEN YOU PUSH THE RACK BACK IN. BE PARTICULARLY
CAREFUL WITH LONG-STEMMED GLASSWARE SUCH AS CHAMPAGNE GLASSES –
BREAKAGE HAZARD!
HOW TO LOAD THE LOWER RACK:
PLACE LARGE ITEMS THAT ARE HARD TO CLEAN IN THE LOWER RACK: eg. POTS, PANS,
LIDS, SERVING DISHES, BOWLS.
• POTS, SERVING BOWLS, ETC. MUST ALWAYS BE PLACED UPSIDE DOWN.
• DEEP POTS SHOULD BE SLANTED TO LET WATER FLOW OUT.
• THE BOTTOM RACK FEATURES FOLD DOWN BASKETS SO THAT LARGER OR MORE POTS
& PANS CAN BE LOADED.
1
. OVAL PLATTER.
2. DINNER PLATES.
3. SOUP PLATES.
4. DESSERT
DISHES.
5. CUTLERY
BASKET.
BAUMATIC BDW13, BDW14 dishwasher user manual
11
11
CUTLERY BASKET
CUTLERY SHOULD BE PLACED IN THE CUTLERY BASKET WITH HANDLES ALWAYS POINTING
DOWNWARD (AT THE BOTTOM). VERY LONG UTENSILS (LADLES, etc.) SHOULD BE PLACED
HORIZONTALLY AT THE FRONT OF THE UPPER RACK.
NOTE
:
• WHEN YOU ARE SATISFIED YOU HAVE LOADED ALL THE UTENSILS
AND DISHES YOU WANT TO WASH AND HAVE ADDED THE PROPER
AMOUNT OF DETERGENT TO THE DISPENSER
(REMEMBER TO CHECK THE
TABLE ON PAGE 13 FOR THE DOSE THAT’S RIGHT FOR THE WASHING CYCLE YOU
WANT),
ENSURE THE RACKS ARE PUSHED ALL THE WAY BACK INTO
YOUR DISHWASHER AND CLOSE THE DOOR.
• YOU ARE NOW READY TO START A WASH CYCLE (SEE NEXT PAGE).
1 Forks
2 Soup Spoons
3 Dessert Spoons
4 Teaspoons
5 Knives
6 Serving Spoons
7 Gravy Ladle
8 Serving Fork
BAUMATIC BDW13, BDW14 dishwasher user manual
12
12
STARTING A WASH CYCLE
1) MAKE SURE THAT YOUR DISHWASHER’S PLUG
HAS BEEN PUSHED ALL THE WAY INTO THE WALL
SOCKET.
2) MAKE SURE THAT THE WATER SUPPLY IS TURNED
ON TO FULL PRESSURE.
3) LOAD YOUR DISHWASHER (SEE THE SECTION
ENTITLED ‘LOADING YOUR DISHWASHER’, PAGES
8-11).
4) POUR IN DETERGENT (SEE THE SECTION
ENTITLED ‘SALT, DETERGENT & RINSE AID’),
PAGES 5-7.
5) OPEN THE DOOR, PRESS THE ‘ON/OFF’
BUTTON AND THE ‘ON/OFF’ LIGHT WILL
COME ON.
6) PRESS THE ‘P’ KEY (PROGRAM KEY) TO
SELECT THE ‘WASH CYCLE’. SEE TABLE
ON NEXT PAGE FOR WASH CYCLE TYPES.
7) CLOSE THE DOOR. THE WASHING WILL
START AFTER APPROXIMATELY TEN
SECONDS.
* REMEMBER *: YOU CAN PROGRAM YOUR DISHWASHER UP TO 24 HOURS IN
ADVANCE BY PRESSING THE DELAY BUTTON MULTIPLE TIMES UNTIL THE
DESIRED DELAY HAS BEEN SET.
.
Approximate Timing of Wash Cycles
Intensive
(strong) 133
mins.
Normal
112
mins.
Economy
106
mins.
Rinse
51
mins.
Glass
73
mins.
Rapid
48
mins.
Soap
7
mins.
P
* Note: Each time you press the delay timer key, you will move the start of your wash cycle forward by one hour.
Delay Timer Key (7)
**** Note: When you turn your dishwasher on, the number ‘OO’ should show on the display. If you see
any other digits, such as ‘17’ or ‘01’, ‘02’, ‘03’, etc., please refer to the trouble-shooting section on page 19.
BAUMATIC BDW13, BDW14 dishwasher user manual
13
13
OVERFLOW PROTECTION
YOUR BAUMATIC DISHWASHER HAS AN OVERFILL PROTECTION DEVICE WHICH AUTOMATICALLY SHUTS OFF
THE INLET VALVE AND STARTS THE DRAIN PUMP IF THE WATER OVERFLOWS. IF THIS OCCURS THEN TURN OFF
THE MAINS WATER SUPPLY BEFORE CALLING THE SERVICE DEPARTMENT. IF THERE IS WATER IN THE BASE
PAN BECAUSE OF AN OVERFILL OR SMALL LEAK, THE WATER SHOULD BE REMOVED BEFORE RESTARTING THE
DISHWASHER. A BUCKET AND A SPONGE ARE RECOMMENDED TO HAVE AT HAND FOR THIS PURPOSE.
5 grams (pre)
/ 22 grams
main
15 grams
15 grams
22 grams
5 grams (pre)
/ 22 grams
main
BAUMATIC BDW13, BDW14 dishwasher user manual
14
14
FORGET TO ADD A DISH?
A FORGOTTEN DISH CAN BE ADDED AT ANY TIME BEFORE THE DETERGENT
DISPENSER OPENS.
• OPEN THE DOOR A LITTLE TO STOP THE WASHING.
• WAIT ABOUT TEN SECONDS. AFTER THE SPRAY ARMS STOP WORKING,
YOU CAN OPEN THE DOOR COMPLETELY.
• ADD FORGOTTEN DISHES.
• CLOSE THE DOOR, THE DISHWASHER WILL WORK AFTER TEN SECONDS.
NEED TO INTERRUPT A CYCLE?
If an emergency arises, you can stop the machine at any time. Remember to wait
approx. 10 seconds before you open the door fully, as the spray arms continue to turn
after the power has been cut and could spray hot water up at you.
DO NOT PRESS THE ‘ON/OFF’ BUTTON AS THIS WILL RESET THE WHOLE
WASH CYCLE! YOU JUST NEED TO PULL THE DOOR OPEN – DO NOT TOUCH
ANY BUTTONS!
SET THE WRONG CYCLE?
If you set the wrong wash program, you can always cancel the one the machine is
working on by pressing the ‘ON/OFF’ button to switch your dishwasher off, waiting a
few seconds before opening the door to change the cycle (see p.12 to recap on how to
start a washing cycle). Don’t forget to add detergent for the new cycle. Your
dishwasher will automatically drain any water away and begin the new cycle.
TAKE CARE WHEN OPENING THE DOOR DURING
WASHING. THE HOT WATER IN THERE MAY SCALD YOU IF YOU OPEN
THE DOOR TOO QUICKLY!
BAUMATIC BDW13, BDW14 dishwasher user manual
15
15
AT THE END OF THE WASH CYCLE
WHEN YOUR DISHWASHER’S WASHING CYCLE HAS FINISHED:
• THE ALARM WILL SOUND FOR EIGHT SECONDS.
• OPEN THE DOOR OF YOUR DISHWASHER & SWITCH YOUR
DISHWASHER OFF USING THE ‘ON/OFF’ KEY.
• WAIT A FEW MINUTES BEFORE UNLOADING THE
DISHWASHER TO AVOID HANDLING THE DISHES AND
UTENSILS WHILE THEY ARE STILL HOT AND MORE
SUSCEPTIBLE TO BREAKAGE.
• THEY WILL ALSO DRY BETTER IF YOU LEAVE THEM IN FOR
A WHILE.
NOTE: THESE MODELS FEATURE BUILT-IN RESIDUAL DRYING.
BAUMATIC BDW13, BDW14 dishwasher user manual
16
16
FILTERING SYSTEM
FOR YOUR CONVENIENCE, WE HAVE PLACED THE FILTERING SYSTEM WITHIN EASY REACH INSIDE THE
TUB. THE FILTER REMOVES BITS OF FOOD TRAPPED IN THE FILTER FROM THE WASH WATER SO IT CAN BE
RECIRCULATED DURING THE CYCLE. THERE ARE THREE PARTS TO THE FILTERING SYSTEM: 1) The Main Filter,
2) The Coarse Filter & 3) The Fine Filter.
1 MAIN FILTER
Food and soil particles trapped by this filter are
pulverized by a special jet on the lower spray arm and
washed down the drain.
2 COARSE FILTER
Larger items, such as pieces of bone or glass that could
clog the drain are trapped in the coarse filter. To
remove an item caught in this filter, gently squeeze
the tabs on top of this filter and lift it out.
3 FINE FILTER
This filter holds soil and food residue in the sump area
and prevents it from being re-deposited on the dishes
during a cycle.
Caring for your Dishwasher
CLEANING THE OUTSIDE SURFACES OF YOUR APPLIANCE
• TO CLEAN THE EXTERIOR OF YOUR DISHWASHER (INCLUDING THE CONTROL PANEL), USE A LIGHTLY
DAMPENED CLOTH THEN DRY THOROUGHLY.
NEVER USE SHARP OBJECTS, SCOURING PADS OR
HARSH CLEANERS ON ANY PART OF THE APPLIANCE. SOME PAPER TOWELS CAN SCRATCH.
• TO CLEAN THE EDGE AROUND THE DOOR,
ONLY EVER USE A SOFT WARM, DAMP RAG.
DO NOT USE A SPRAY CLEANER HERE OR
WHEN CLEANING THE DOOR PANEL AS THIS
MAY HARM THE DOOR LOCK AND
ELECTRICAL PARTS.
CLEANING THE SPRAY ARMS
THE SPRAY ARMS NEED REGULAR CLEANING AS HARD WATER RESIDUES WILL CLOG THEIR
JETS & BEARINGS. TO REMOVE THE SPRAY ARM, SCREW OFF THE NUT TO TAKE OUT THE
WASHER ON TOP OF THE SPRAY ARM AND REMOVE THE ARM. WASH THE ARMS IN SOAPY
WARM WATER & USE A SOFT BRUSH TO CLEAN THE JETS. REPLACE THE SPRAY ARM AFTER
RINSING IT THOROUGHLY.
BAUMATIC BDW13, BDW14 dishwasher user manual
17
17
CLEANING THE FILTERS
• THE FILTER ASSEMBLY MUST BE KEPT CLEAN FOR BEST PERFORMANCE. You should remove the
larger bits of food trapped in the filter after each wash cycle by rinsing the semicircular filter and
cup under running water. To remove the filter assembly, pull up on the cup handle.
• The entire filter assembly should be cleaned at least once a month.
• To clear the coarse filter and the fine filter, use a cleaning brush. Then, reassemble the filter parts
as shown in the figure above and reinsert the entire assembly in the dishwasher in its seat & press
downward to secure it.
• Improper replacement of the filter may impair appliance performance and damage dishes and
utensils.
• Warning - never
run the dishwasher without the filters
in place!
• Warning - Before cleaning the inner cavity of the appliance
always allow 30 minutes for the Element to cool down to
avoid injury!
BAUMATIC BDW13, BDW14 dishwasher user manual
18
18
HOW TO KEEP YOUR DISHWASHER IN SHAPE
AFTER EVERY WASH, leave the door slightly ajar so that moisture and odours are not trapped
inside.
REMOVE THE PLUG before cleaning or performing maintenance. Never run the risk of electric
shocks.
DO NOT USE SOLVENTS OR ABRASIVE CLEANING AGENTS to clean the exterior and the rubber
parts of the dishwasher. Only use a cloth and warm soapy water. To remove spots or stains
from the surface of the interior, use a cloth dampened with water and a little white vinegar,
or a cleaning product made specifically for dishwashers.
WHEN YOU GO ON HOLIDAY, run a wash cycle with the dishwasher empty. Then unplug it, turn
off the water supply and leave the door slightly ajar to prevent odours and mould from
developing.
MOVING THE APPLIANCE is possible but KEEP IT UPRIGHT.
SEALS can trap food, which in turn will cause odours. Periodic cleaning with a damp cloth or
sponge will prevent this from becoming a problem.
PROTECTING YOUR DISHWASHER AGAINST FREEZING
If your dishwasher is left in an unheated place during the winter, ask a
service technician to:
1)
Cut off electrical power to the dishwasher. Remove fuses or trip circuit
breaker.
2) Turn off the water supply and disconnect the water inlet pipe from the water
valve & discharge hoses.
3) Drain water from the inlet pipe and water valve (Use a pan to catch the
water).
4) Reconnect the water inlet pipe to the water valve.
5) Remove the plastic sump cover in the tub bottom and use a sponge to soak
up water in the rubber boot.
BAUMATIC BDW13, BDW14 dishwasher user manual
19
19
BEFORE YOU CALL FOR SERVICE …
CHECKING AGAINST THE CHARTS BELOW MAY FIX YOUR PROBLEM.
PROBLEM POSSIBLE CAUSES WHAT TO DO
• Fuse blown, or the
circuit breaker acted
• Replace fuse or reset circuit
breaker.
• Remove any other appliances
feeding from the same socket as
the dishwasher.
• Power supply is not
turned on
• Make sure the dishwasher is turned
on and the door is closed securely.
• Water pressure is low
• Check that the water supply is
connected properly and the water is
turned on.
Dishwasher
doesn’t run!
• … And (situation A)
the number 17 is
showing on the
display. This means
that your dishwasher
has entered Test
Mode – a factory
sequence which you
need not concern
yourself with. This
happens because the
Delay Timer key was
pressed before the
‘ON/OFF’ key was
pressed.
• … Or (situation B)
the display shows one
of the following: 0A,
09, 08, 07, 06, 05,
04, 03, 02, 01, 00.
• For situation A, Press and hold
down the Delay Timer key at the
same time as you’re pressing the
‘ON/OFF’ button to switch the
dishwasher off. Wait a few
seconds then press only the
‘ON/OFF’ button again. You are
now ready to program your
dishwasher for a washing cycle as
per usual.
• For situation B, Press ‘ON / OFF’
button to turn the dishwasher off.
Then, press and hold down the
Program Key (‘P’) at the same
time as you’re pressing the ‘ON /
OFF’ button to switch the
dishwasher on again. You are now
ready to program a cycle as per
usual.
Drain Pump
doesn’t stop!
• Overflow
• The system is designed to detect an
overflow. When it does, it shuts off
the circulation pump and turns on
the drain pump. Call a Baumatic
Ltd approved technician.
BAUMATIC BDW13, BDW14 dishwasher user manual
20
20
PROBLEM POSSIBLE CAUSES WHAT TO DO
• Some audible sounds
are normal
• Sound from soft food shredding
action and detergent cup opening.
This is not a problem.
• Utensils are not secure
in the baskets or
something small has
dropped into the
basket and is loose
• Ensure everything is placed
securely in the dishwasher.
Noise!
• Motor Hums
• Dishwasher has not been used
regularly. If you do not use it
often, remember to set it to fill and
pump out every week. (See Wash
Cycle table). This will help keep the
seal moist.
Suds in the Tub!
• Improper detergent
• Use only special dishwasher
detergent to avoid suds.
• Spilled rinse agent
• Always wipe up rinse agent spills
immediately.
Stained tub
Interior!
• Detergent with
colorant was used
• Make sure you use detergent
without colorant.
Dishes are not
dried!
• Rinse agent dispenser
is empty
• Make sure that the rinse agent
dispenser is filled.
Dishes and
Flatware not
Clean!
• Improper program • Select stronger program.
BAUMATIC BDW13, BDW14 dishwasher user manual
21
21
PROBLEM POSSIBLE CAUSES WHAT TO DO
• Improper rack loading
• Make sure there are no large dishes
blocking the action of the detergent
dispenser and the spray arms.
Spots and Filming
on Glasses and
Flatware!
• Extremely hard water
• Low inlet temperature
• Overloading the
dishwasher
• Improper loading
• Old or damp powder
detergent
• Empty rinse agent
dispenser
• Incorrect dosage of
detergent
To remove spots from glassware:
1. Take all metal utensils out of the
dishwasher.
2. Do not add detergent.
3. Choose the longest cycle.
4. Start the dishwasher and let it run for 18
- 22 minutes, then it will be in the main
wash.
5. Open the door and pour 2 cups of white
vinegar into the bottom of the dishwasher.
6. Close the door and let the dishwasher
complete the cycle.
7. If the vinegar does not work, repeat as
above, only use ¼ cup (60ml) of citric acid
crystals instead of vinegar.
Cloudiness on
glass!
• Combination of soft
water and too much
detergent
• Use less detergent if you have soft
water and select a shorter cycle to
clean the glassware.
Yellow or brown
film on inside
surfaces!
• Tea or coffee stains
• Use a solution of ½ cup of bleach
and 3 cups warm water to remove
the stains by hand. Rinse
thoroughly.
White film on
inside surface!
• Iron deposits in water
can cause an overall
film
• You have to call a water softener
company for a special filter.
• Hard water minerals
• To clean the interior, use a damp
sponge with dishwasher detergent
and wear rubber gloves. Never use
any other cleaner than dishwasher
detergent for the risk of foaming or
suds.
Detergent cup lid
won’t latch!
• Button is not in the
‘OFF’ position
• Turn the Button to ‘OFF’ position
and slide the door latch to the left.
BAUMATIC BDW13, BDW14 dishwasher user manual
22
22
PROBLEM POSSIBLE CAUSES WHAT TO DO
Detergent left in
dispenser cups!
• Dishes block detergent
cups
• Reload the dishes properly.
Steam!
• Normal phenomenon
• There is some steam coming
through the vent by the door latch
during drying and water draining.
Black or grey
marks on dishes!
• Aluminium utensils
have rubbed against
dishes
• Use a mild abrasive cleaner to
eliminate those marks by hand.
Water standing in
the bottom of the
tub!
• This is normal
• A small amount of clean water
around the outlet on the tub bottom
at the back of the tub keeps the
water seal lubricated. No action
needed.
• Overfilled dispenser or
rinse aid has spilled
• Be careful not to overfill the rinse
aid dispenser.
• Spilled rinse aid could cause
oversudsing and lead to
overflowing.
• Wipe away any spills with a damp
cloth.
• Dishwasher isn’t level • Make sure the dishwasher is level.
Dishwasher leaks!
• 3-in-1 Tablets
• Make sure if you’re using 3-in-1
tablets that you do not put rinse aid
and salt into the appliance as well.
BAUMATIC BDW13, BDW14 dishwasher user manual
23
23
PROBLEM POSSIBLE CAUSES WHAT TO DO
• Appliance not level
• Level appliance & ensure top screws
attaching appliance to work surface
are not lifting the weight of the
dishwasher.
• Door not fitted
correctly
• See pages 27-28 for information
about correct fitting of door.
• Door tension not
adjusted
• Adjust tension page 29.
Door popping
open!
• Door lock failure –
Weight of door
• Refer to service. Maximum weight
of the door is 5.5 kg.
Wrong Reading of
Cycle Time
remaining!
• Note that the control
panel display shows
the water temperature
as the dishwasher
starts a cycle
• Understand what your appliance’s
control panel is displaying. Do not
confuse the water temperature
with the number of minutes
remaining in a wash cycle.
BAUMATIC BDW13, BDW14 dishwasher user manual
24
24
ERROR CODES - WHAT THEY MEAN
* YOUR DISHWASHER MAY EXPERIENCE A FAULT. SHOULD THIS HAPPEN, A
CODE CONSISTING OF ‘E’ & A NUMBER FROM 1-7 CAN BE DISPLAYED.
USE THIS TABLE TO UNDERSTAND WHAT IS WRONG.
*NOTE*: ALWAYS CALL FOR A Baumatic Ltd ENDORSED / APPROVED
SERVICE TECHNICIAN TO CARRY OUT REPAIRS.
CODE
SYMPTOM: CAUSE: WHAT TO DO:
‘E1’
LONGER FILL TIME. FAUCET IS NOT OPENED.
Ensure that inlet hose is not
kinked or crushed.
‘E2’
LONGER or EXTENDED DRAINING TIME
THE DRAIN PIPE WAS PLACED
TOO HIGH WHEN IT WAS
INSTALLED.
Ensure drainage system is as
per manual and not
extended.
‘E3’
LONGER HEATING TIME – NOT
REACHING REQUIRED TEMPERATURE
MALFUNCTION OF
TEMPERATURE SENSOR OR OF
HEATING ELEMENT.
CALL FOR A QUALIFIED
SERVICE TECHNICIAN.
‘E4’
OVERFILLED
TOO MUCH INLET WATER.
*NOTE * - THERE ARE
NUMEROUS CAUSES OF AN ‘E4’
MESSAGE. REFER TO
APPLIANCE USAGE SECTION
OF THIS MANUAL FOR
GUIDELINES ON HOW TO
PREVENT AN OVERFILL.
Overdosing. 3-in-1 put in
with salt and/or rinse aid in
the appliance =overdose.
Could also be a Water
Pressure problem.
‘E5’
*
SWITCH CANNOT SHUT OFF
AUTOMATICALLY – PROGRAM NOT
FINISHING ITS CYCLE.
LOW VOLTAGE OR POWER
SWITCH FAILURE.
*** NOTE – YOU WILL NOT
RUN INTO THIS ERROR ON THE
BDW13/14/15 MODELS ****
CALL FOR A QUALIFIED
SERVICE TECHNICIAN.
‘E6’
OPEN CIRCUIT THERMISTOR.
CALL FOR A QUALIFIED
SERVICE TECHNICIAN.
‘E7’
SHORT CIRCUIT THERMISTOR.
CALL FOR A QUALIFIED
SERVICE TECHNICIAN.
WARNING!
IF OVERFLOW OCCURS, TURN OFF THE MAIN WATER SUPPLY BEFORE CALLING A SERVICE
TECHNICIAN. IF THERE IS WATER IN THE BASE OF THE TANK PAN BECAUSE OF AN OVERFILL
OR SMALL LEAK, THE WATER SHOULD BE REMOVED BEFORE RESTARTING THE DISHWASHER.
BAUMATIC BDW13, BDW14 dishwasher user manual
25
25
DISHWASHER CHARACTERISTICS
The BAUMATIC BDW13 & BDW14 dishwasher models are based firmly on
convenience. Apart from having the same general workings as other household
dishwashers, they have several extra features.
Performance of
Dishwasher -
Your dishwasher
has a B rated wash performance, B rated
drying performance and A rated energy
efficiency.
Overflow protection - Your
dishwasher has an overfill protection
program which could automatically shut off
the inlet valve and start the drain pump if
the water Overflows.
Time delay feature
-
This allows the start of the program to
be delayed between 1 and 24 hours,
enabling you to benefit fully from cheaper
electricity! Or just to benefit from the
convenience of the program finishing when
you want it to.
Error Alarm - Fault
codes display will inform the user of any
abnormal status of the machine.
Temperature
display -
Displays the wash
temperature at any moment. If you know
the water temperature, you’ll be less likely
to be scalded when you open the door.
Stainless steel tub-
You need not worry about stains to the
tub.
7 wash programs -
You can choose desired program according
to the soiled level. Such as, intensive
wash, normal wash, economy, rinse, glass,
rapid and pre-wash, etc.
12 place settings -
Normal wash load of 12 place settings.
Adjustable upper
basket -
Even if the dishware is
large, you can load the dishes by adjusting
the basket.
Salt Warning
Indicator -
If the salt is running
low, this signal will light up on the control
panel to alert you to top the salt level up
so the machine can keep at its optimum
performance level.
Rinse aid Warning
Indicator -
If the rinse aid is
running low, this signal will light up on the
control panel, alerting you to top the rinse
aid level up so the machine can keep at its
optimum performance level.
Broad applied
voltage -
This appliance uses AC
(alternating current) voltage. Please be
aware that this will make its operation
vulnerable to uneven current in your home
and power surges.
BAUMATIC BDW13, BDW14 dishwasher user manual
26
26
INSTALLATION INSTRUCTIONS
NOTE: APPLIANCE SHOULD ONLY BE FITTED
BY A TRAINED TECHNICIAN
INSTALLING YOUR DISHWASHER
a) PREPARATION
Before you install your appliance, make sure that the place you
have chosen to fit it is:
• Near the existing power socket.
• So that you can choose one side of the cabinet cavity to
easily connect the dishwasher’s drain hoses.
• Near your sink so you have easy access to the water inlet
and drain hoses.
• If dishwasher is to be installed at the corner of cabinet
area, make sure you have enough space when the door is
opened.
•
Is structured so that you have less than 5 mm between
the top of the dishwasher and cabinet. Also check that the
outer door is aligned to cabinet. (See figures below).
BAUMATIC BDW13, BDW14 dishwasher user manual
27
27
b) PLACING AND FITTING YOUR
DISHWASHER’S OPTIONAL FURNITURE DOOR
1 The furniture door (an optional accessory fitted to match
your kitchen décor available from your kitchen unit dealer)
can be attached to the front of the dishwasher according to
the following diagram. (Measurement is in millimetres):
•
NOTE: THE MAXIMUM WEIGHT OF THE DOOR IS 5.5 KILOGRAMS.
• DO NOT INSTALL WITH SCREWS THROUGH THE DOOR
ONLY.
• ONLY USE THE 2 SCREW HOLES AND BRACKETS AVAILABLE.
• FAILURE TO INSTALL DOOR CORRECTLY CAN CAUSE
PROBLEMS WITH THE DOOR / PERFORMANCE OF YOUR
APPLIANCE.
BAUMATIC BDW13, BDW14 dishwasher user manual
28
28
2
Install the hook on the
furniture door and put the
hook into the slot of the
outer door of the
dishwasher (see top figure).
After positioning the panel,
fix it onto the outer door
using screws and bolts (see
bottom figure).
Installing the furniture door
NOTE: NAMED IN FIGURE AS ‘AESTHETIC
PANEL
’
(PICTURED ON RIGHT)
1. Take away the
cover.
2. Affix the screw.
3. Replace the cover.
BAUMATIC BDW13, BDW14 dishwasher user manual
29
29
c) TENSION ADJUSTMENT OF THE DOOR
SPRING
Your dishwasher’s outer door is attached to springs. These are set at
the factory to ensure they’re at the proper tension so that the door can
open and close smoothly and conveniently.
Note: If you have installed a cover panel over the door, you will have
to adjust the door spring tension.
• Using an Allen key, rotate the adjusting screw to tighten
or slacken the steel cable. You must do this or damage to
your dishwasher may result.
The door’s spring tension is good when the door remains horizontal in
the fully opened position, yet rises to a close with the slight lift of a
finger.
Warning: failure to adjust the door spring
tension could result in damage to your
dishwasher!
BAUMATIC BDW13, BDW14 dishwasher user manual
30
30
d) NEXT, CONNECT THE WATER INLET (SEE
FIGURE BELOW):
Connect the cold water supply hose to a
threaded ¾ inch connector and make sure that
it is fastened tightly in place.
Attach tube C
to the cold water supply A.
If the water pipes are new or have not been
used for a long time, let the water run to make
sure that the water is clear and free of
impurities. The water inlet may get blocked and
damage the appliance.
Make sure the water pressure is the same as the
range indicated on the data tag.
DO NOT CONNECT TO THE HOT
WATER SYSTEM!
If your appliance is fitted with an aqua stop
system then this must be fitted vertically
(pointing upwards) not downwards or sideways
.
e) THEN, CONNECT THE DRAIN HOSE (SEE
FIGURE BELOW):
The curved end of the drainage hose should be hooked into the drainage stand pipe or, alternatively, over
the edge of your sink.
During installation, make sure that:
• The drainage hose is not kinked or crushed.
• The hose end, relative to the top surface of the dishwasher (SEE FIGURE BELOW), must be
placed at a height between 32cm and 80cm.
• The end of the hose must never be immersed in water.
• The drainage hose must not be extended to more than a maximum length of 1 metre. The
extension must have the same internal diameter. Furthermore, the maximum height at which
the hose end can be placed (in the case of an extended tube) must be reduced from 80cm to
50cm.
• The drainage stand pipe must have an internal diameter of no less than 4 cm.
NOTE: DO NOT EXTEND THE DRAIN HOSE AS THIS CAN AFFECT THE
PERFORMANCE OF THE DISHWASHER.
BAUMATIC BDW13, BDW14 dishwasher user manual
31
31
f) NOW YOU ARE READY TO CONNECT THE
POWER CORD.
WARNING!
ELECTRICITY CAN BE DANGEROUS. PLEASE READ THE FOLLOWING
CAREFULLY
:
ELECTRICAL CONNECTION
Electrical Requirements
The dishwasher is designed for operation on an adequately wired individual 220-240V AC,
50Hz system. The required fuse rating is 13amp. Fused electrical supply is required –
copper wire only. Time delay fuse or circuit breaker is recommended. Make sure that this
appliance runs off its own separate circuit. Outlet should be placed in adjacent cabinet.
WARNING – ENSURE PROPER GROUND EXISTS
BEFORE USE.
After making sure that the voltage and the frequency values for the current in your home
correspond to those on the rating plate and that the electrical system is sized for the
maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed
properly. If the electrical socket to which the appliance must be connected is not right for
the plug, replace the socket, rather than using adaptors of the like as they could cause
overheating and fire.
BAUMATIC BDW13, BDW14 dishwasher user manual
32
32
g) NOW, PUT THE DISHWASHER ON THE SLIDE
RAILS (These are supplied so your appliance can be pushed into place
easily and to protect your floor surface from pressure points). See figure at
bottom of page.
h) THEN, APPLY THE CONDENSATION STRIP.
The Condensation Strip must be fitted to the
underside of the worktop above your dishwasher
to protect it against any moisture. Its purpose
is to deflect steam rising from your appliance to
protect your worktop’s underside.
• The strip is located inside your
dishwasher.
• Ensure the surface is clean prior to
sticking to underside of the worktop.
• Separate the backing paper from the
strip.
• Stick to the underside of the worktop.
Note
: Failure to attach strip could
result in damage to the underside
of your work surface!
i) NOW YOU ARE READY TO PUSH THE
DISHWASHER INTO POSITION (SEE FIGURE BELOW):
NOTE –
MAKE SURE YOU HAVE THE
DISHWASHER ON ITS SLIDE RAILS
(STEP 4 IN ILLUSTRATION ON
RIGHT).
THEN MOVE IT INTO THE CABINET
RECESS (AS PICTURED ON RIGHT).
ENSURING THAT IT IS BACKED UP
AGAINST THE WALL. ATTACH THE
FURNITURE DOOR (STEP 1 AS
PICTURED ON RIGHT) IF YOU HAVE
NOT ALREADY DONE SO.
YOU ARE NOW READY TO SECURE
YOUR APPLIANCE TO THE CABINET
AREA (STEP 8 AS PICTURED ON
RIGHT) & (STEPS 2 & 7 AS PICTURED
ON RIGHT).
SEE p. 33 FOR FURTHER
INSTRUCTIONS AS TO HOW TO
ACCOMPLISH THESE.
BAUMATIC BDW13, BDW14 dishwasher user manual
33
33
j) NOW GET THE DISHWASHER LEVEL.
NOTE: YOUR
DISHWASHER MUST
BE LEVEL FOR
PROPER DISH RACK
OPERATION AND
WASH
PERFORMANCE.
WARNING!
BE CAREFUL WHILE YOU ARE
LEVELLING YOUR DISHWASHER
IN PLACE – IT COULD TIP OVER
AND INJURE YOU!
CONSULT THE FIGURE BELOW
FOR HELP!
THE REAR FEET CAN BE ADJUSTED FROM THE FRONT OF THE DISHWASHER BY TURNING THE SCREWS ON THE
LEFT AND RIGHT HAND SIDES OF THE CABINET. TO ADJUST THE FRONT FEET, USE A WRENCH / SPANNER AND
TURN THE FRONT FEET UNTIL THE DISHWASHER IS LEVEL (PLEASE SEE ‘REMARK B’ IN THE ABOVE FIGURE).
WHEN YOU ROTATE THE ADJUSTER POLE CLOCKWISE, THE BACK FOOT WILL DRIVE UP THE DISHWASHER.
(PLEASE SEE ‘REMARK A’ IN THE ABOVE FIGURE). PLEASE NOTE THAT THE FRONT LEVELLING FEET ARE
HELD TO THE APPLIANCE BY LOCKING NUTS. PLEASE HANDLE THESE WITH CARE WHEN INSTALLING.
k) THE DISHWASHER MUST NOW BE SECURED
IN PLACE
. THERE ARE TWO WAYS TO DO THIS, DEPENDING ON YOUR TYPE OF WORK
SURFACE. REMEMBER THAT YOUR DISHWASHER’S WEIGHT MUST REST ON ITS FEET. THE
FASTENINGS AT ITS TOP ARE TO GIVE STABILITY AND WILL PREVENT IT FROM TIPPING
FORWARD:
NORMAL WORK SURFACE
- SECURE TO THE WORK SURFACE’S UNDERSIDE BY USING TWO
WOODSCREWS ENSURING THAT THE DISHWASHER CAN OPEN AND CLOSE COMFORTABLY.
MARBLE OR GRANITE WORK TOP
– FOR THESE WORKTOPS, YOU WILL NOT BE ABLE TO
SECURE THE TOP OF THE DISHWASHER TO THE UNDERSIDE OF THE SPECIAL WORK SURFACE.
BECAUSE OF THIS, YOU WILL HAVE TO SECURE THE BRACKET TO THE SIDE PANELS OF THE
DISHWASHER CABINET AND SECURE THE DISHWASHER TO THE FURNITURE HOUSING. PUT THE
RUBBER CAP OVER THE SCREW.
NOTE: DO NOT PUT ANY WEIGHT FROM THE DISHWASHER ON THESE SCREWS – ENSURE
YOUR DISHWASHER’S WEIGHT RESTS ENTIRELY ON ITS FEET.
CAUTION:
IT IS IMPORTANT THAT YOU RAISE THE BACK OF THE DISHWASHER WHILE YOU ARE LEVELLING THE
REAR FEET. THIS CAN BE ACHIEVED USING A LEVER AND FULCRUM. TAKE GREAT CARE WHEN
ATTEMPTING TO MOVE OR TILT YOUR DISHWASHER IN ANY WAY. NOTE: BAUMATIC WILL NOT BE
LIABLE
FOR ANY INJURY OR DAMAGE INCURRED WHILST YOU ATTEMPT TO MOVE YOUR DISHWASHER.
BAUMATIC BDW13, BDW14 dishwasher user manual
34
34
FINAL CHECKLIST BEFORE OPERATING
NOTE: BEFORE
YOU START USING YOUR DISHWASHER,
PLEASE MAKE SURE YOU HAVE CHECKED
:
• WHETHER THE DISHWASHER IS LEVEL AND
FIXED.
• WHETHER THE INLET VALVE IS OPENED.
• WHETHER THERE IS LEAKAGE AT THE
CONNECTIONS OF THE CONDUCTS.
• WHETHER THE WIRES ARE TIGHTLY
CONNECTED.
• WHETHER THE POWER IS SWITCHED ON.
• WHETHER THE INLET AND DRAIN HOSES
ARE KNOTTED / KINKED.
• WHETHER ALL PACKING MATERIALS &
PRINTED MATTER HAVE BEEN REMOVED
FROM THE DISHWASHER.
PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE
BAUMATIC BDW13, BDW14 dishwasher user manual
35
35
BAUMATIC LTD. -CONDITIONS OF GUARANTEE.
Dear Customer,
The conditions of guarantee which apply to your Baumatic appliance are as follows: This product is
guaranteed for 12 months from the date of original purchase.
Baumatic Ltd will repair any defect that arises due to faulty materials or workmanship free of charge
during this period.
*In addition, your appliance is covered by a 5 year parts warranty. Baumatic Ltd will provide free of charge
the parts required to repair the appliance, only if they are fitted by a Baumatic engineer, for any defect
that arises due to faulty materials or workmanship within a period of 5 years from the original purchase
date.
*An additional and annually renewable insurance scheme for labour is available should you wish to extend
the warranty period.
Should any person other than an authorised representative of Baumatic Ltd interfere with the appliance,
the policy is negated and Baumatic Ltd will be under no further liability.
The guarantee covers the appliance for normal domestic use only, unless otherwise stated.
Any claims made under the terms of the guarantee must be supported by the original invoice/bill of sale
issued at the time of purchase.
This guarantee is transferable only with the written consent of Baumatic Ltd.
If the appliance fails and is considered either not repairable or uneconomical to repair between twelve
months and five years from purchase date, a free of charge replacement will not be offered.
The guarantee for any replacement will only be for the remainder of the guarantee on the original product
purchased.
This guarantee does not cover:
x Sinks and taps
X Failure to comply with the manufacturer’s instructions for use.
X The replacement of cosmetic components or accessories.
X Accidental damage or wilful abuse.
X Subsequent loss or damage owing to the failure of the appliance or electrical supply.
X Incorrect installation.
X Losses caused by Acts of God, civil war, failure to obtain spare parts, strikes or lockouts.
X Filters, fuses, light bulbs, external hoses, damage to bodywork, paintwork, plastic items, covers,
baskets, trays, shelves, burner bases, burner caps, decals, corrosion, rubber seals..
In the course of the work carried out it may be necessary to remove the appliance from its operating
position. Whilst all reasonable care will be taken, Baumatic Ltd cannot accept responsibility for damage
sustained to any property whatsoever in this process.
This guarantee is in addition to and does not diminish your statutory or legal rights.
Contacting Baumatic.
SALES SERVICE SPARES TECHNICAL / ADVICE
TEL: 0118 933 6900 TEL: 0118 933 6911 TEL: 0118 933 6922 TEL: 0118 9336933
FAX: 0118 931 0035 FAX: 0118 986 9124 FAX: 0118 933 6942 FAX: 0118 9336942
For mainland UK and Northern Ireland, please contact one of the above numbers for further information or
any other query you may have.
For ROI (Republic of Ireland), please contact one the numbers below:
TEL: 01 - 6266798 FAX: 01 - 6266634
Thank you for buying Baumatic.
*Applies to UK, Scotland, Wales & Northern Ireland only. (Republic of Ireland has 1 year labour and 1 year parts warranty only) .
BAUMATIC BDW13, BDW14 dishwasher user manual
36
36
Baumatic Ltd
Make-up for your kitchen
Headquarters
Baumatic Ltd.
Baumatic Buildings,
6 Bennet Road,
Reading,
Berkshire
RG2 0QX, United Kingdom
Sales Telephone
+44 118 933 6900
Sales Fax
+44 118 931 0035
Service Telephone
+44 118 933 6911
Service Fax
+44 118 986 9124
Spares Telephone
+44 118 933 6922
Technical / Advice Telephone
+44 118 933 6933
E-mail
:
sales@baumatic.co.uk
technical@baumatic.co.uk
Http (Internet site):
www.baumatic.com
Baumatic UK/cod. 1230000666
This appliance is marked according to the European
Directive 2002/96/EC on Waste Electrical and Electronic
Equipment(WEEE).
This guideline is the frame of a Europeanwide validity of
return and recycling on Waste Electrical and Electronic
Equipment.
… 36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Baumatic BDW13 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Baumatic BDW13 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info