305997
2
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
Before using the washing machine
1.Remove the packaging
and check
After unpacking, make sure
that the washing machine is
undamaged. If in doubt, do
not use the washing
machine. Contact After-
Sales Service or your local
dealer.
Keep the packaging
materials (plastic bags,
polystyrene parts, etc.) out of
reach of children, since it is a
possible source of danger.
2.Remove the transit
bolts
The appliance is fitted with
transit bolts to prevent
internal damage during
transport.
Before using
the washing machine you
must remove the transit
bolts
(see “Installation/
Remove the transit bolts”).
3.Install the washing
machine
Install the appliance on a
solid and level floor surface.
In the case of a yielding sub-
floor, the appliance should
be installed in the corner of
a room.
Adjust the feet to ensure that
the machine is stable and level
on the floor (see “Installation/
Adjust the feet”).
4.Water inlet
Connect the water supply
inlet hose in accordance
with the regulations of your
local water company (see
"Installation/Connect the
water supply hose").
Water
supply: Cold water only
Tap: 3/4” threaded
hose connection
Pressure: 100-1000 kPa
(1-10 bar).
5.Drain hose
Connect the drain hose to
the ventilated siphon or
hook it over the edge of a
sink by means of the "U"
bend (see "Installation/
Connect the water drain
hose").
6.Electrical connections
Electrical connections must
be carried out by a qualified
electrician in compliance
with the manufacturer's
instructions and local safety
regulations.
Voltage information, power
consumption and electrical
fusing data are supplied on
the front panel behind the
door frame.
The appliance must be
connected to the mains
exclusively by means of a
socket with an earth
connection in accordance
with established
regulations. The appliance
must be earthed by law. The
manufacturer declines all
liability for possible damage
to property or injury to
persons or pets deriving
from failure to observe the
a/m directions.
Do not use extension leads
or multi sockets.
Before any maintenance on
the washing machine
disconnect the power plug or
switch off the power supply.
Access to the mains plug or
to disconnection from mains
supply via a double-pole
switch must be ensured at all
times following the
installation.
Do not operate the washing
machine if it has been
damaged during transport.
Inform the After-Sales
Service.
Mains cable replacement is
only to be carried out by
After-Sales Service.
The washing machine must
only be used in the
household for the
prescribed uses.
4gb15150.fm Page 2 Monday, July 8, 2002 7:00 PM
2

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bauknecht-wab-8795-big-x-10

Zoeken resetten

  • storing f / dl aanduiding , regelmatig , na div keren herstellen gaat het wasprogramma verder Gesteld op 24-1-2016 om 12:16

    Reageer op deze vraag Misbruik melden
  • Mijn big krijgt melding F dl
    Deurblijft op kinderslot niets funktioneert meer.
    Als ik op aan druk blijft de machine stilstaan en onder de knop tikt het regelmatig
    Wat kan ik doen??
    Geantwoord op 29-5-2016 om 20:03

    Waardeer dit antwoord (4) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bauknecht wab 8795 big x 10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bauknecht wab 8795 big x 10 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Bauknecht wab 8795 big x 10

Bauknecht wab 8795 big x 10 Gebruiksaanwijzing - Nederlands - 14 pagina's

Bauknecht wab 8795 big x 10 Gebruiksaanwijzing - Deutsch - 14 pagina's

Bauknecht wab 8795 big x 10 Gebruiksaanwijzing - Français - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info