572353

Bauknecht WA 9787 Handleiding

3
Verklein
Vergroot
Pagina terug
1/17
Pagina verder
5019 401 05426
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
Turn the programme selector to the desired programme.
The
temperature
and
spin speed
indicated on the
display can be altered by pressing the “Temperature”
button or the “Variable spin” button.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Eco” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics” and
“Daily load” programmes to make ironing easier.
• Increases the water quantity and the clothes are spun
very gently.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash when
activating the Prewash option.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very
soft water or for washing baby linen, and helps people
with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing and
prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
• It is particularly useful if you want to postpone spinning
to a later time, or if you want to drain only.
• If you select “Rinse hold”, do not leave the laundry to
soak for too long.
Note:
The programme stops to “Rinse hold” at the
time the “Rinse hold” symbol on the display lights up.
The light over the
“Start”
button flashes.
Terminate the “Rinse hold” option:
• Press the
“Start”
button; the programme will
terminate automatically with the final spin cycle for the
present wash programme.
• If you do not wish to spin the clothes, select and start
the “Drain” programme.
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.
If there is a programme setting which you use frequently,
the appliance offers the possibility to save one setting for
each programme so that it can be used again by just
pushing one button.
• Select the desired programme, temperature, spin
speed and option(s), push and hold the
“Favourites”
button for at least 3 seconds. The lamp next to
“Favourites”
shortly flashes and then lights up - the
programme setting is saved.
CONSUMPTION DATA
Programme
Te m p e r a t u r e
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
*
White Cotton / Antibacterial 95 7.0 70
**
2.10 2:10
Cotton 60 7.0 65 1.33 2:10
Cotton with “Eco”
***
60 7.0 60 1.19 2:20
Cotton 40 7.0 65 0.75 2:05
SuperEco 60 7.0 62 0.84 4:00
Synthetics 60 3.5 48
**
0.95 1:35
Synthetics 40 3.5 44 0.55 1:20
Daily load 40 5.0 66 0.60 1:00
Quick wash 30 5.0 60 0.30 0:30
Delicates 30 2.5 60 0.45 0:50
Wool 40 2.0 60 0.65 0:45
Handwash 40 2.0 45 0.65 0:40
Handwash (Lingerie) 30 2.0 45 0.35 0:36
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*
The time indicated on the display can deviate from the values in the table, because it takes into account the household
conditions applicable at that time.
**
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
***
Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
SAVE YOUR FAVOURITE PROGRAMMES
Next time you want to use your individual programme
setting, select the programme, push the
“Favourites”
button and start by pushing
“Start”
.
If you want to replace the saved programme setting
by another one:
• Push the programme button, select temperature, spin
speed and options as desired and then press and hold
the
“Favourites”
button for at least 3 seconds. The
previously saved programme setting will be replaced
by the new one.
The “Start Delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper.
• Select programme, temperature, spin speed and
options.
• Press the “Start Delay” button to select the delay time
up to 23 hours.
• Press the
“Start”
button.
The countdown of the delay time begins; the clock
symbol next to the delay time and the dot between
hours and minutes flash.
• The time delay indication disappears when the
programme starts and it is replaced by the remaining
programme time.
• Once having pressed the
“Start”
button, the number
of hours preselected can be reduced by pressing and
holding the “Start Delay” button. From 1 hour on, the
delay time can also be reduced by minutes.
To cancel the “Start Delay”
..before you press the “Start” button:
• Select another programme or press the
“Cancel/
Reset”
button.
..after having pressed the “Start” button:
• Press the
“Cancel/Reset”
button for at least
3 seconds - the start delay time disappears from the
display.
Open the tap and press the
“Start”
button. The light
over the
“Start”
button comes on. The programme
sequence indicator shows the current programme phase,
running from left to right through Wash, Rinse, Spin/Drain.
Before starting and after end of a programme, the symbol
lights to show that the door can be opened. As long as a
wash programme is running, the door remains locked and
must on no account be forced open. In case you have an
urgent need to open it during a running programme, refer
to “Cancel (Reset) a running programme before the end”.
You can lock the buttons of the control panel against
improper use (e.g. by children).
• Press the temperature and the spin speed button
simultaneously and hold them for at least 3 seconds.
The key symbol on the display lights up.
• To unlock the buttons again: proceed in the same way.
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter
case refer to the Instructions for Use (“Removing the
Filter”).
“Service”
Lighting up of the “Service” indication can be caused by a
fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.
• The symbols of the programme sequence indicator
are dark, and the “Door open” symbol lights up.
1. Turn the programme selector to the “Off/0” poisition.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
1. Press the
“Start”
button to pause the programme.
The light flashes.
2. Select the new programme, temperature, any options
and another spin speed if you want.
3. Press the
“Start”
button again. The new programme
continues at the same position where the previous
programme was interrupted. Do not add detergent
for this programme.
The
“Cancel/Reset”
button cancels a programme before
the end.
• Press the
“Cancel/Reset”
button for at least
3 seconds. Any existing water is drained out before
the door can be opened.
START DELAY
PROGRAMME START
“DOOR OPEN” INDICATION
LOCK BUTTONS
RED INDICATIONS ON THE DISPLAY
PROGRAMME END
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
40105426GB.fm Page 2 Tuesday, September 11, 2007 7:12 PM
Black process 45.0° 100.0 LPI
3 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bauknecht WA 9787 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bauknecht WA 9787 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Bauknecht WA 9787

Bauknecht WA 9787 Gebruiksaanwijzing - Deutsch - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info