Handleiding Bauknecht WA 9586 (pagina 3 van 16) (Engels)

572350

Verklein

Vergroot

Pagina terug

1/16

Pagina verder

5019 401 05427

Add detergent as indicated on the front page and as

described in the chapter “Detergent and Additives” in

your Instructions for Use.

1. Turn the

programme selector

to the desired

programme. The display shows the programme

duration in hours and minutes as well as the

predefined temperature. The

“Start/Pause”

button

flashes.

2. The

temperature

can be altered by pressing the

“Temperature” button.

3. The indication lamp of the predefined

spin speed

lights up; in case you want to set another spin speed,

press the “Variable spin” button.

Push the button(s) of any option(s) desired - the respective

indication lights up.

When the combination of programme and additional

option(s) is not possible, the indication lights switch off

automatically. Unsuitable combinations of options are

deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand,

granular dirt) sensible. Increases the cycle time by

approximately 15 min.

• Do not use liquid detergent for the main wash when

activating the Prewash option.

“Rinse hold” button

• The laundry remains in the last rinse water without

progressing to the final spin cycle to avoid creasing and

prevent colours from changing.

• This option is particularly recommended for the

programmes “Synthetics”, “Daily load” and

“Delicates”.

• It is particularly useful if you want to postpone spinning

to a later time, or if you want to drain only.

• If you select “Rinse hold”, do not leave the laundry to

soak for too long.

Note:

The programme stops to “Rinse hold” at the

time the “Rinse hold” light in the programme sequence

indicator is on. The indication lamp next to the

“Start/

Pause”

button flashes.

Terminate the “Rinse hold” option:

• Press the

“Start/Pause”

button; the programme will

terminate automatically with the final spin cycle for the

present wash programme.

• If you do not wish to spin the clothes, turn the

programme selector to the “Drain” programme and

press the

“Start/Pause”

button.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very

soft water, washing baby linen and helps people with

allergies.

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and

“Daily load” programmes to make ironing easier.

• Increases the water quantity and the clothes are spun

very gently.

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during

rinse. The water is drained out only.

CONSUMPTION DATA

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme Duration

(hours : minutes)

White Cotton / Antibacterial 95 6.0 59

1.90 2:00

Cotton 60 6.0 56 1.14 2:10

Cotton with “Eco”

***

60 6.0 49 1.02 2:20

Cotton 40 5.0 56 0.70 2:00

SuperEco 60 6.0 51 0.72 4:00

Synthetics 60 2.5 50

0.80 1:35

Synthetics 40 2.5 46 0.50 1:20

Daily load 40 3.0 41 0.50 1:00

Quick wash 30 3.0 41 0.40 0:30

Delicates 30 1.5 60 0.50 0:45

Wool 40 1.0 60 0.50 0:45

Handwash 40 1.0 45 0.50 0:40

Lingerie 30 1.0 45 0.40 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home

may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The time indicated on the display can deviate from the values in the table, because it takes into account the household conditions

applicable at that time.

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

***

Reference Programme for Energy Label.

ADD DETERGENTS, CLOSE THE DOOR

AND SELECT THE PROGRAMME

SELECT ANY DESIRED OPTION

“Eco” button

• With a modified temperature profile and a slightly

prolonged washing duration, the optimum

combination of excellent washing result and even

lower energy consumption is achieved.

If there is a programme setting which you use frequently,

the appliance offers the possibility to save one setting for

each programme so that it can be used again by just

pushing one button.

• Select the desired programme, temperature, spin

speed and option(s), push and hold the

“Favourites”

button for at least 3 seconds. The lamp next to

“Favourites”

shortly flashes and then lights up - the

programme setting is saved.

Next time you want to use your individual programme

setting, select the programme, push the

“Favourites”

button and start by pushing

“Start/Pause”

If you want to replace the saved programme setting

by another one:

• Push the programme button, select temperature, spin

speed and options as desired and then press and hold

the

“Favourites”

button for at least 3 seconds. The

previously saved programme setting will be replaced

by the new one.

The “Start Delay” allows to run the machine at the

consumer’s convenience, for example at night when

electricity is cheaper. Do not use liquid detergent when

activating the “Start Delay”.

• Select programme, temperature and options.

• Press the “Start Delay” button to select the delay time

by 1 to 23 hours;

• Press the

“Start/Pause”

button.

The indication light next to the “Start Delay” button

lights up and the countdown of the delay time begins.

During the countdown, the light over the “Start

Delay” button and the dot between hours and minutes

on the display flashes.

• The time delay indication disappears when the

programme starts and it is replaced by the remaining

programme time.

• Once having pressed the

“Start/Pause”

button, the

number of hours preselected can be reduced by

pressing and holding the “Start Delay” button. From 1

hour on, the delay time can also be reduced in steps of

10 minutes.

To cancel the “Start Delay”

..before you press the “Start/Pause” button:

• Turn the programme selector to another position or

press the

“Reset”

button.

..after having pressed the “Start/Pause” button:

• Press the

“Reset”

button for at least 3 seconds - the

start delay time disappears from the display.

Open the tap and press the

“Start/Pause”

button. The

indication lamp over the

“Start/Pause”

button lights up.

The programme sequence indicator shows the current

programme phase, running from left to right through

Wash, Rinse, Spin/Drain.

The display shows the remaining programme time. Due to

variations in load and temperature of inlet water, the

remaining time is newly calculated in certain programme

phases. If this is the case,

an animation appears on the

display

Before starting and after end of a programme, the lamp

lights to show that the door can be opened. As long as a

wash programme is running, the door remains locked and

must on no account be forced open. In case you have an

urgent need to open it during a running programme, refer

to “Cancel (Reset) a running programme before the end”.

“Service”

Lighting up of the “Service” indication can be caused by a

fault in an electrical component. Refer to the

“Troubleshooting Guide” in your Instructions for Use; if

the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open

the water tap; if the indication still lights up, refer to the

“Troubleshooting Guide” in your Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain

hose is kinked or the filter must be cleaned; in the latter

case refer to the Instructions for Use (“Removing the

Filter”).

• All the lights of the programme sequence indicator

are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O”

position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

1. Press the

“Start/Pause”

button to pause the

programme. The light flashes.

2. Select the new programme, temperature, any options

and another spin speed if you want.

3. Press the

“Start/Pause”

button again. The new

programme continues at the same position where the

previous programme was interrupted. Do not add

detergent for this programme.

The

“Reset”

button cancels a programme before the end.

• Press the

“Reset”

button for at least 3 seconds. Any

existing water is drained out before the door can be

opened.

SAVE YOUR FAVOURITE PROGRAMMES

START DELAY

PROGRAMME START

“DOOR OPEN” INDICATION

RED INDICATIONS

PROGRAMME END

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

CANCEL (RESET) A RUNNING

PROGRAMME BEFORE THE END

40105427GB.fm Page 2 Tuesday, September 11, 2007 7:12 PM

Black process 45.0° 100.0 LPI

Bauknecht WA 9586 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Bauknecht WA 9586

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info