BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!
5019 400 00393
THE CONTROL PANEL OF THIS DISHWASHER ACTIVATES PUSHING ANY BUTTON EXCEPT CANCEL/OFF BUTTON.
FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER 30 SECONDS IF NO CYCLE HAS STARTED.
PROGRAM
SELECTION
BUTTON
Push “P” button
(repeatedly) until
selected program number
is shown on the display
(P1...Px) - see “Table of
programs” - next page).
ANTIBACTERIAL
RINSE
This function activates an
antibacterial rinse at the
end of the wash cycle,
guaranteeing a further
reduction of bacteria.
Press the button to
activate or deactivate the
function. This function
can be used with the
programs indicated in the
table of programs. The
dishwasher door must be
kept shut for the entire
duration of the program
in order to guarantee
reduction of bacteria. If
the door is opened the
indicator lamp starts
flashing.
SALT INDICATOR
When lit (at the end of the cycle),
the salt reservoir needs to be
refilled.
WASH TIME DISPLAY
Indicated the cycle duration and the remaining time (h:min). With “Delayed start” selected it
indicates the time remaining until program start (h.00) - below 1h (0:min).
If “Fx Ey” messages appears on the display, see page 9 - chapter “What to do if...”.
RINSE AID INDICATOR
When lit (at the end of the cycle),
the rinse aid dispenser needs to be
refilled.
POWERCLEAN
®
Thanks to the additional
power jets this option
provides a more intensive
and powerful wash in the
lower rack, in the specific
area.
This option is
recommended for
washing pots and
casseroles (see page 7).
Press this button to
activate PowerClean
®
(the indicator lights up).
For non PowerClean
®
loading to achieve best
cleaning performances
and resources
optimization,
PowerClean
®
should be
switched off.
TABLET SETTING
This setting allows to
optimize the cycle
performances according
the type of detergent
used.
Push the Tablet button
for 3 seconds (until the
indicator lights up) if you
are using the combined
detergents in tablet (rinse
aid, salt and detergent in 1
dose).
If you are using powder
detergent or liquid
detergent, the Tablet
indicator on the control
panel has to be off.
START/RESUME
BUTTON
Push this button to start
the selected program: the
indicator lights up and
goes off at the end of the
program.
When the door is opened
during a washing cycle,
the cycle is temporarily
paused: the Start
indicator blinks.
To resume the cycle close
the door and push Start
button again.
CANCEL/OFF
BUTTON
Push this button to switch
off the control panel.
If pressed when a
program is running it
cancels the program
ongoing draining water
for 1 minute (0:01 is
shown into the display).
If pressed when the
dishwasher is switched
off, it drains any possible
liquids from dishwasher
(1 minute process).
DELAYED START
BUTTON
Push the button
(repeatedly) to delay the
start of the program.
Adjustable from 1 to 24
hours.
With each press of the
button, the delayed start
indicator increases by one
hour and after 24 restarts
from 0.
Then press the START
button.
The dishwasher will start
after the set time.
