806463
1
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
EN
Quick guide
1
PRODUCT DESCRIPTION
5
4
3
2
1
5
4
3
2
1
1
2
3
4
5
8
9
7
6
1. Control panel
2. Fan
3. Circular heating element
(not visible)
4. Shelf guides
(the level is indicated on the
front of the oven)
5. Door
6. Upper heating element/grill
7. Lamp
8. Identification plate
(do not remove)
9. Lower heating element
(not visible)
CONTROL PANEL DESCRIPTION
123 4 5 76 8 9
1. ON / OFF
For switching the oven on and
off and for stopping an active
function.
2. FUNCTIONS DIRECT ACCESS
For quick access to the functions
and menu.
3. NAVIGATION BUTTON MINUS
For scrolling through a menu and
decreasing the settings or values
of a function.
4. BACK
For returning to the previous
screen.
During cooking, allows settings to
be changed.
5. DISPLAY
6. CONFIRM
For confirming a selected function
or a set value.
7. NAVIGATION BUTTON PLUS
For scrolling through a menu and
increasing the settings or values of
a function.
8. OPTIONS / FUNCTIONS DIRECT
ACCESS
For quick access to the functions,
time options, settings and favorites.
9. START
For starting a function using the
specified or basic settings.
THANK YOU FOR BUYING A BAUKNECHT PRODUCT
In order to receive a more complete assistance, please
register your product on www . bauknecht . eu / register
Before using the appliance carefully read the Safety
Instruction.
2
ACCESSORIES
WIRE SHELF DRIP TRAY BAKING TRAY SLIDING RUNNERS*
Use to cook food or as a
support for pans, cake tins
and other ovenproof items of
cookware.
Use as an oven tray for
cooking meat, sh,
vegetables, focaccia, etc. or
position underneath the wire
shelf to collect cooking juices.
Use for cooking all bread and
pastry products, but also for
roasts, sh en papillote, etc.
To facilitate inserting or
removing accessories.
* Available only on certain models
The number and the type of accessories may vary depending on which model is purchased.
Other accessories can be purchased separately from the After-sales Service.
INSERTING THE WIRE SHELF AND OTHER
ACCESSORIES
Insert the wire shelf horizontally by sliding it across
the shelf guides, making sure that the side with the
raised edge is facing upwards.
Other accessories, such as the drip tray and the
baking tray, are inserted horizontally in the same way
as the wire shelf.
REMOVING AND REFITTING THE SHELF GUIDES
To remove the shelf guides, remove the fixing
screws (if present) on both sides with the aid of a
coin of a tool. Lift the guides up and pull the lower
parts out of their seatings: The shelf guides can
now be removed.
To refit the shelf guides, first fit them back into
their upper seating. Keeping them held up, slide
them into the cooking compartment, then lower
them into position in the lower seating. Refit the
fixing screws.
2
1
FITTING THE SLIDING RUNNERS IF PRESENT
Remove the shelf guides from the oven and remove
the protective plastic from the sliding runners.
Fasten the upper clip of the runner to the shelf guide
and slide it along as far as it will go. Lower the other
clip into position.
To secure the guide, press the lower portion of the
clip firmly against the shelf guide. Make sure that the
runners can move freely. Repeat these steps on the
other shelf guide on the same level.
Please note: The sliding runners can be tted on any level.
EN
3
FUNCTIONS
MY MENU
These allow a fully automatic cooking for all types
of food (Lasagna, Meat, Fish, Vegetables, Cakes & Pastries,
Salty cakes, Bread, Pizza). To use at best this function,
follow the indications on the relative cooking table.
MANUAL FUNCTIONS
CONVECT BAKE
For cooking meat, baking cakes with fillings on one
shelf only.
MULTIFLOW MENU
For cooking different foods that require the same
cooking temperature on four levels at the same time.
This function can be used to cook cookies, cakes, round
pizzas (also frozen) and to prepare a complete meal.
Follow the cooking table to obtain the best results.
GRILL FUNCTIONS
»GRILL
For grilling steaks, kebabs and sausages, cooking
vegetables au gratin or toasting bread. When grilling
meat, we recommend using a drip tray to collect the
cooking juices: Position the tray on any of the levels
below the wire shelf and add 500 ml of drinking water.
»TURBO GRILL
For roasting large joints of meat (legs, roast beef,
chicken). We recommend using a drip tray to collect
the cooking juices: Position the pan on any of the levels
below the wire shelf and add 500 ml of drinking water.
MY FROZEN FOOD
The function automatically selects the ideal cooking
temperature and mode for 5 different types of ready
frozen food. The oven does not have to be preheated.
SPECIALS
»DEFROSTING
To speed up defrosting of food. Place food on the
middle shelf. Leave food in its packaging to prevent it
from drying out on the outside.
»KEEP WARM
For keeping just-cooked food hot and crisp.
»RISING
For optimal proving of sweet or savoury dough. To
maintain the quality of proving, do not activate the
function if the oven is still hot following a cooking cycle.
»MAXI COOKING
For cooking large joints of meat (above 2.5 kg). It is
advisable to turn the meat over during cooking, to
obtain even browning on both sides. It is best to baste
the meat every now and again to prevent it from drying
out.
»ECO FORCED AIR
For cooking stued roasting joints and lletsof meat
on a single shelf. Food is prevented from drying out
excessively by gentle, intermittent air circulation. When
this ECO function is in use, the light will remain switched
o during cooking. To use the ECO cycle and therefore
optimise power consumption, the oven door should not
be opened until the food is completely cooked.
»SLOW COOKING
To gently cook meat and fish. This function cooks food
slowly to keep it tender and succulent. Due to the low
temperature, the food does not brown on the outside
and the end result is similar to steam cooking. We
recommend searing roast meat in a pan first to brown
the meat and help seal in its natural juices. For best
results, keep the oven door closed during cooking in
order to avoid heat dispersion.Suggested cooking times
ranges for fish (300 g - 3 kg) are between 2-5 hours, for
meat (1-3 kg) between 4-7 hours.
CLEANING  PYRO
For eliminating cooking spatters using a cycle at very
high temperature. Two selfcleaning cycles are available:
A complete cycle (Pyro) and a shorter cycle (Pyro Eco).
We recommend using the quicker cycle at regular
intervals and the complete cycle only when the oven is
heavily soiled.
FAST PREHEAT
For preheating the oven quickly.
FORCED AIR
For cooking different foods that require the same
cooking temperature on several shelves (maximum
three) at the same time. This function can be used to
cook different foods without odours being transferred
from one food to another.
CONVENTIONAL
For cooking any kind of dish on one shelf only.
MY FAVORITES
For retrieving up the list of 10 favorite functions.
REMOTE CONTROL
To enable use of the connectivity features
switching on and off the control of your appliance
through the Bauknecht Home Net App.
See the chapter below to know the procedure for
connecting to your home network and configuring the
product.
MINUTEMINDER
For keeping time without activating a function.
SETTINGS
For adjust the oven settings.
When “ECO” mode is active the brightness of the display will be
reduced to save energy and lamp switches o after 1 minute. It
will be reactivated automatically whenever any of the buttons
are pressed.
When “DEMO” is “On” all commands are active and menues
available but the oven doesn’t heat up. To deactivate this
mode, acceed “DEMO” from “SETTINGS” menu and select “O.
By selecting “FACTORY RESET”, the product switches o and
then it returns to rst switch on. All settings will be deleted.
4
FIRST TIME USE
1. SELECT THE LANGUAGE
You will need to set the language and the time
when you switch on the appliance for the first time:
“English will show on the display.
1.English
Press or to scroll through the list of available
languages and select the one you require.
Press to confirm your selection.
Please note: The language can subsequently be changed by
selecting “LANGUAGE” in “SETTINGS” menu, available by
pressing .
2. SET THE POWER CONSUMPTION
The oven is programmed to consume a level of
electrical power that is compatible with a domestic
network that has a rating of more than 3 kW (16): If
your household uses a lower power, you will need to
decrease this value (13).
POWER
Press or to select 16 “High or 13 “Low and press
to confirm.
3. SET THE TIME
After selecting the power, you will need to set the
current time: The two digits for the hour will flash on
the display.
CLOCK
Press or to set the current hour and press : The
two digits for the minutes will flash on the display.
Press or to set the minutes and press to
confirm.
Please note: You may need to set the time again following
lengthy power outages. Select “CLOCK” in “SETTINGS” menu,
available by pressing .
3.1 SET THE TIME ON A CONNECTED APPLIANCE
On a connected appliance the Clock time could be
automatically updated from the Cloud.
In the event the user wants to change the clock time received
from the Cloud, going to the Settings Menu enter the
“CLOCK” item and manually set the time; in this case any
further automatic clock update sent from the Cloud will be
ignored.
4. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal. Before starting to cook food, we therefore
recommend heating the oven with it empty in
order to remove any possible odours. Remove any
protective cardboard or transparent film from the
oven and remove any accessories from inside it. Heat
the oven to 200 °C for around one hour, ideally using
a function with air circulation (e.g. “Forced Air” or
“Convection Bake”).
Please note: It is advisable to air the room after using the
appliance for the rst time.
DAILY USE
1. SELECT A FUNCTION
Press to switch on the oven: the display will show
the last running main function or the main menu.
The functions can be selected by pressing the icon for
one of the main functions or by scrolling through a
menu: To select an item from a menu (the display will
show the first available item), press or to select
the desired one, then press to confirm.
6. Keep Warm
2. SET THE FUNCTION
After having selected the function you require, you
can change its settings. The display will show the
settings that can be changed in sequence. Pressing
allows you to change the previous setting again.
TEMPERATURE / GRILL LEVEL
TEMPERATURE
When the value flashes on the display, press or to
change it, then press to confirm and continue with
the settings that follow (if possible).
In the same way, it is possible to set the grill level:
There are three defined power levels for grilling: 3
(high), 2 (mid), 1 (low).
Please note: Once the function has been activated, the
temperature/grill level can be changed using or .
DURATION
DURATION
When the icon flashes on the display, press or
to set the cooking time you require and then press
EN
5
to confirm. You do not have to set the cooking time
if you want to manage cooking manually (untimed):
Press or to confirm and start the function. By
selecting this mode, you cannot program a delayed
start.
Please note: You can adjust the cooking time that has been
set during cooking by pressing : press or to amend it
and then press to conrm.
END TIME START DELAY
In many functions, once you have set a cooking time
you can delay starting the function by programming
its end time. The display shows the end time while
the icon flashes.
END TIME
Press or to set the time you want cooking to end,
then press to confirm and activate the function.
Place the food in the oven and close the door: The
function will start automatically after the period of
time that has been calculated in order for cooking to
finish at the time you have set.
Please note: Programming a delayed cooking start time will
disable the oven preheating phase: The oven will reach the
temperature your require gradually, meaning that cooking
times will be slightly longer than those listed in the cooking
table. During the waiting time, you can press or to
amend the programmed end time or press to change
other settings. By pressing , in order to visualize
information, it is possible to switch between end time and
duration.
. MY MENU
These functions automatically select the best cooking
mode, temperature and duration to cook, roast or
bake all the dishes available.
When required, simply indicate the characteristic of
food to obtain an optimal result.
WEIGHT / HEIGHT ROUNDTRAYLAYERS
KILOGRAMS
To set the function correctly, follow the indications on
the display, when prompted, and press or to set
the required value then press to confirm.
DONENESS / BROWNING
In some My Menu functions it is possible to adjust the
doneness level.
DONENESS
When prompted, press or to select the desired
level between rare (-1) and well done (+1). Press or
to confirm and start the function.
In the same way, where allowed, in some My Menu
functions, its possible to adjust the browning level
between low (-1) and high (+1).
3. START THE FUNCTION
At any time, if the default values are those desired or
once you have applied the settings you require, press
to activate the function.
During the delay phase, press to skip this phase
and start the function immediately.
Please note: Once a function has been selected, the display
will recommend the most suitable level for each function.
At any time you can stop the function that has been activated
by pressing .
If the oven is hot and the function requires a specific
maximum temperature, a message will shown on
the display. Press to return to previous screen
and select a different function or wait for a complete
cooling.
4. PREHEATING
Some functions have an oven preheating phase: Once
the function has started, the display indicates that
the preheating phase has been activated.
PREHEATING
Once this phase has finished, an audible signal will
sound and the display will indicate that the oven
has reached the set temperature, requiring to ADD
FOOD”. At this point, open the door, place the food in
the oven, close the door and start cooking.
Please note: Placing the food in the oven before preheating
has nished may have an adverse eect on the nal cooking
result. Opening the door during the preheating phase will
stop pause it.
The cooking time does not include a preheating
phase. You can always change the temperature you
want the oven to reach using or .
5. PAUSE COOKING / TURN OR CHECK FOOD
By opening the door, the cooking will be temporarily
paused through deactivating heating elements.
To resume the cooking, close the door.
Some My Menu functions will require the food to be
turned during cooking.
TURN FOOD
An audible signal will sound and the display shows
the action to be done. Open the door, do the action
prompted by the display and close the door and
resume cooking.
In the same way, at 10% of time before the end of
cooking, the oven prompts you to check the food.
CHECK ON FOOD
An audible signal will sound and the display shows
6
the action to be done. Check the food, close the door
and resume cooking.
Please note: Press to skip these actions. Otherwise, if no
action is done after a certain time the oven will continue the
cooking.
6. END OF COOKING
An audible signal will sound and the display will
indicate that cooking is complete.
END
Press to continue cooking in manual mode
(untimed) or press to extend the cooking time by
setting a new duration. In both cases, the cooking
parameters will be retained.
BROWNING
Some functions of the oven enable you to brown
the surface of the food by activating the grill once
cooking is complete.
PRESS v TO BROWN
When the display shows the relevant message, if
required press to start a five-minute browning
cycle. You can stop the function at any time by
pressing to switch the oven off.
. FAVORITES
Once cooking is complete the display will prompt you
to save the function in a number between 1 and 10
on your list of favorites.
ADD FAVORITE?
If you would like to save a function as a favorite and
store the current settings for future use, press
otherwise, to ignore the request press .
Once has been pressed, press the or to select
the number position, then press to confirm.
Please note: If the memory is full or the number chosen has
already been taken, the oven will ask you to conrm
overwriting the previous function.
To call up the functions you have saved at a later
time, press : The display will show your list of
favorite functions.
1. CONVENTIONAL
Press or to select the function, confirm by
pressing , and then press to activate.
. AUTOMATIC CLEANING  PYRO
Do not touch the oven during the Pyro cycle.
Keep children and animals away from the oven
during and after (until the room has finished
airing) running the Pyro cycle.
Remove all accessories - including shelf guides -
from the oven before activating the function. If the
oven is installed below a hob, make sure that all the
burners or electric hotplates are switched off while
running the selfcleaning cycle. For optimum cleaning
results, remove excessive residuals inside the cavity
and clean the inner door glass before using the Pyro
function. We recommend only running the Pyro
function if the appliance contains heavy soiling or
gives off bad odours during cooking.
Press to access the “Specials menu, and select the
the Cleaning function. “Pyro will appear on the
display.
Pyro
Press or to select the desired cycle, then press
to confirm.
The display will prompt you to do all actions needed to
obtain the best cleaning results.
Once a cycle has been selected, if desired, press or
to set end time (start delay), then press to
confirm.
Once you have done all steps, when required press
to activate the cleaning cycle.
The oven will begin the self-cleaning cycle, while the
door locks automatically: a warning message appears
on the display, along with a countdown indicating the
status of the cycle in progress.
Once the cycle has been completed, the door remains
locked until the temperature inside the oven has
returned to a safe level.
EN
7
. MINUTEMINDER
When the oven is switched off, the display can be
used as a timer. To activate this function, make sure
that the oven is switched off and press or : The
icon will flash on the display.
Press or to set the length of time you require and
then press to activate the timer.
MINUTE-MINDER
An audible signal will sound and the display will
indicate once the minuteminder has finished
counting down the selected time.
Please note: The minuteminder does not activate any of the
cooking cycles. Press or to change the time set on the
timer.
Once the minuteminder has been activated, you can
also select and activate a function.
Press to switch on the oven and then select the
function you require.
Once the function has started, the timer will continue
to count down independently without interfering
with the function itself.
Please note: During this phase, it isn’t possible to see the
minuteminder (only the icon will be displayed), that will
continue counting down in background. To retrieve the
minuteminder screen press to stop the function that is
currently active.
. KEYLOCK
To lock the keypad, press and hold for at least five
seconds. Do this again to unlock the keypad.
KEYLOCK
Please note: This function can also be activated during
cooking. For safety reasons, the oven can be switched o at
any time by pressing .
8
CONNECTIVITY*
Thanks to the Bauknecht Home Net feature, your
appliance can be connected to the internet. Using
the Bauknecht Home Net App on your smartphone/
tablet, you can:
monitor the status of the appliance
set and start a cooking cycle
change, modify, or stop a running cooking cycle
access additional contents
get automatic updates of the appliance software
To enable the connectivity, you have to successfully
complete the process to connect the appliance
to your home network router and App. The setup
procedure has to be carried out only once.
You will have to carry it out again only if you change your
home network properties (network name and password).
MINIMUM REQUIREMENTS
Mobile device: Android with a 1280x720 (or higher)
screen or iOS. See on App store the App compatibility
with Android or iOS versions.
Wireless router: 2.4Ghz WiFi b/g/n.
HOW TO SETUP
To use this feature you need to own: a mobile device
(smartphone or tablet) and a wireless router connected
to internet. Please verify with your mobile device that
the signal strength of your home wireless network close
to the appliance is good. During the setup procedure,
the appliance and your mobile device must be
connected to the same wireless network.
Download the Bauknecht Home Net App for your
mobile device. You can download the App by visiting
either iTunes or Google Play.
Once downloaded, please follow the instructions
from App to create an account. Once you have your
account, open the App and press on the bottom
left of the screen to add a new appliance to your
account.
Scan the QR-code on the label you can find on your
appliance, then the Bauknecht Home Net App will be
your guide to walk through all of the steps needed to
complete the process.
Note: In some circumstances, the App may require you to
enter the type of appliance: in this case, select Oven.
During the Connection process, you will see several messages appearing on the display and the icons blinking with
dierent patterns; to know the operations performed in background by the appliance, see the descriptions in the
following table.
WHAT YOU SEE ON THE DISPLAY MEANING
FOLLOW INSTRUCTI
Displayed message: Follow instructions on the App.
During this twenty minutes countdown, the appliance tries to connect to your home
network (router).
WiFi icon blinks quickly.
PLEASE WAIT
Displayed message: Please wait.
If the router connection is completed, the appliance will try to reach the App
automatically, and it will ask to wait.
WiFi icon blinks slowly.
APPLIANCE CONNEC
Displayed message: Appliance connected.
All the process has been successful: your appliance is now connected.
WiFi icon stops blinking.
USE THE APP TO R
Displayed message: Use the App to register the product.
Follow the last instructions on the App to complete the registration, giving a name to
the appliance. Then you will find it quickly on the App’s homepage.
CONNECTION ERROR
Displayed message: Connection error.
This message could be displayed for a few seconds if the appliance has not been able
to complete setup procedure in a certain time. After that the appliance goes Standby
and the WiFi icon turns off.
SAID: 0123456789
MAC ID: 88:E7:45:67:89
SAID: 0123456789
MAC ID: 88:E7:45:67:89
*: not available in Russia
EN
9
REMOTE CONTROL
If your appliance is properly connected, it’s possible
to press the icon , to activate Remote Control.
Through your mobile device, you will be allowed
to remotely control the oven, to send inputs and
supervise cooking cycles.
When a cooking cycle is sent from the App, the
display shows the information ‘Cycle received’ for
some seconds, then the cycle starts.
CYCLE RECEIVED
RESET CONNECTION
This function could be useful in the event that your
home network properties has changed (network name
or password).
Before resetting the connection, please check if it is
possible to restore the network name and password
that you used when you connected the appliance
to your home network. In this case it would not be
necessary to reset the connection.
To reset the connection, please follow this
path: SETTINGS > CONNECTIVITY MENU > RESET
CONNECTION > YES. The display will ask Are you
sure?”. By pressing , the connection will be reset.
You can now connect again your appliance (see “How
to Setup paragraph).
SOFTWARE UPDATE
While in Standby, an appliance already configured
for connection, with WiFi reception enabled, can
automatically update the software when a new
version is available.
SOFTWARE UPDATE
When the update is in progress, the percentage of
completion will be shown on the display.
Note: Make sure that the appliance power source is always
engaged during this software update process.
During the update process it is impossible to interact with the
control panel.
CONNECTIVITY FAQ
Which WiFi protocols are supported?
The WiFi adapter installed supports WiFi b/g/n for
European countries.
The following router settings are required: 2.4 GHz
enabled, WiFi b/g/n, DHCP and NAT activated.
Are there any differences between using a
smartphone (or tablet) with Android or iOS?
You can use whichever operating system you prefer, it
makes no difference.
Can I use mobile 3G tethering instead of a router?
Yes, but cloud services are designed for permanently
connected devices.
How can I check whether my home internet
connection is working and wireless functionality is
enabled?
You can search for your network on your smart
device. Disable any other data connections before
trying.
How can I check whether the appliance is
connected to my home wireless network?
Access your router configuration (see router manual)
and check whether the appliances MAC address is
listed on wireless connected devices page.
Where can I find the appliances MAC address and
the SAID code?
There is a sticker on your appliance with a QR-code:
Close to the QR-code you should find the SAID code
and the MAC address.
It is also possible to retrieve the SAID code and the
MAC address pressing SETTINGS on the Control
Panel, then entering the Connectivity menu and
selecting the voices “MAC address or “SAID code.
How can I check whether the appliance is properly
connected to the App?
Open the Bauknecht Home Net App on your mobile
device, and check if your appliance is visible.
Is there anything that can prevent the signal
reaching the appliance?
Check that the devices you have connected are not
using up all the available bandwidth. Make sure
that your WiFi-enabled devices do not exceed the
maximum number permitted by the router.
How far should the router be from the appliance?
Normally the WiFi signal is strong enough to cover
a couple of rooms, but this very much depends on
the material the walls are made of. You can check
the signal strength by placing your smart device
(connected to the same home network) next to the
appliance.
How can I find out the name and password for my
wireless network?
See the router documentation. There is usually
a sticker on the router showing the information
you need to reach the device setup page using a
connected device.
What can I do if my router is using the
neighbourhood WiFi channel?
Force the router to use your home WiFi channel.
10
How can I check the WiFi status of my appliance? Is
it possible to turn off the reception of WiFi?
The WiFi module is ON by default in this appliance.
Its possible to change or confirm the WiFi status
by entering the Connectivity Menu, selecting ‘WiFi
Status. The display will show the current Status value,
that could be ON or OFF.
Note: When the power is retrieved after a power loss, the WiFi
Module will keep its settings (links to router and App), and the
Remote control status is always restored.
How can I change my Bauknecht account but keep
my appliances connected?
You can create a new account, but remember to
remove your appliances from your old account before
moving them to your new one.
I changed my router: what do I need to do?
If you can keep the previous network name and
password in the new router, then you have nothing to
do, the appliance will reconnect automatically.
Otherwise, to reconnect the appliance to the new
WiFi network, just press in the App home
page, as you should add again the appliance to your
account.
Note: you do NOT have to previously remove the appliance
from your account. The App will guide you through the
re-connection process.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bauknecht BIK7 CPC8TS PT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bauknecht BIK7 CPC8TS PT in de taal/talen: Engels als bijlage per email.

De handleiding is 16.3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Bauknecht BIK7 CPC8TS PT

Bauknecht BIK7 CPC8TS PT Gebruiksaanwijzing - Nederlands - 16 pagina's

Bauknecht BIK7 CPC8TS PT Gebruiksaanwijzing - Deutsch - 16 pagina's

Bauknecht BIK7 CPC8TS PT Gebruiksaanwijzing - Français - 16 pagina's

Bauknecht BIK7 CPC8TS PT Gebruiksaanwijzing - Italiano - 16 pagina's

Bauknecht BIK7 CPC8TS PT Gebruiksaanwijzing - Espanõl - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info