589451
26
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
6.2 Remove blade guard
1. Insert 5 mm hex key (1) into the blade guard
fulcrum nut (2).
2. Turn hex key counter clockwise to remove the
blade guard fulcrum nut.
3. Slide blade guard fulcrum bolt (3) out of the
blade guard (4).
4. Carefully slide the blade guard off the tool.
6.3 Remove blade
Warning! Always unplug the tool from
the power source before making any
adjustments or changing the blade.
Warning! Always be extremely careful
when handling blades. They will be
extremely hot immediately after use.
They are also very sharp and may
cause serious injury.
1. Insert the 5 mm hex key (1) into the arbor
screw (2) on the LEFT side of the tool.
2. Press inward on the spindle lock button (3)
which is located on the RIGHT side of the tool.
3. Rotate the hex key CLOCKWISE while
pressing on the spindle lock button until the
spindle lock button engages the spindle.
4. Continue to rotate the arbor screw in a
26
TM
should also be considered such as, for example,
continued turning and idling of the tool).
Limit noise and vibration to a minimum!
Use only problem free electric power tools.
Regularly maintain and clean the electric
power tool.
Adapt your working methods to the electric
power tool.
Do not overload the electric power tool.
Have the electric power tool inspected, if
necessary.
Switch the electric power tool off when it is not
in use.
6. ASSEMBLY AND OPERATION
This multi-cutter precision saw is a versatile tool
that is designed for use in conned work spaces.
By selecting the appropriate cutting blades, it will
cut copper and aluminum tubing, ceramic and
marble tile, and assorted wood products. The
following assembly and operating instructions will
explain the tool and its operation in detail.
6.1 Install vacuum adaptor
The vacuum adaptor can be used to attach a
workshop vacuum hose to the tool. This will prevent
most cutting dust from escaping into the work area.
1. Line up the tabs on the small end of the
vacuum adaptor (1) with the matching slots (2)
in the vacuum port (3) in the rear of the tool.
2. Push the vacuum adaptor into the vacuum port
as far as it will go.
3. Twist the vacuum adaptor clockwise to lock it
into position.
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Batavia XXL SPEED SAW Mini BT-CS001 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Batavia XXL SPEED SAW Mini BT-CS001 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 4,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Batavia XXL SPEED SAW Mini BT-CS001

Batavia XXL SPEED SAW Mini BT-CS001 Aanvulling / aanpassing - Nederlands, Deutsch, English, Français - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info