Handleiding Batavia Racer BT-CS006 (pagina 22 van 60) (Nederlands, Duits, Engels, Frans)

589450

Verklein

Vergroot

Pagina terug

1/60

Pagina verder

i) Do not use damaged grinding discs. Before

each use, inspect the grinding wheels for

any chipping or cracks. If the electric power

tool or the grinding disc is dropped, inspect

it for damage or replace it with an

undamaged grinding disc. When you have

inspected and installed the grinding disc,

make sure that you, and any other nearby

individuals, remain out of the plane of the

rotating grinding disc and then allow the

tool to rotate at its highest speed for one

minute. Damaged grinding discs usually break

during this test time.

j) Wear protective clothing and equipment.

Depending on the application, use either a

full face visor, protective goggles or safety

glasses. As far as appropriate, where a dust

mask, hearing protection, safety gloves or

special apron to protect yourself from

splinters and other particles of material.

Theeyesmustbeprotectedagainstanyying

particles which may be generated during the

various applications. Dust masks or respirators

mustlteroutthedustgeneratedbythe

application. If you are exposed to loud noise

for a long time, you may suffer from hearing

loss.

k) Make sure that other people remain at a

safe distance from your working area.

Anyone entering the work area must wear

personal safety clothing and equipment.

Fragments of the workpiece or of a broken tool

insertmayyoffandcauseinjuries,even

outside the direct working area.

l) If you are carrying out work in situations

where the tool insert may make contact with

concealed power lines or its own power

cable, only hold the device by the insulated

hand grips. Contact with a live cable could

result in metal parts of the device also

becoming live and lead to an electric shock.

m) Keep the power cable and the rotating tool

insert far apart. If you lose control of the

device, the power cable may be severed or

caught and may draw your hand or arm into the

rotating tool insert.

Never put down the electric power tool

before the tool insert has come to a complete

stop. The rotating tool insert may come into

contact with the supporting surface and cause

you to lose control of the electric power tool.

o) Do not leave the electric power tool running

while you carry it around. Your clothes may

become caught through accidental contact with

the rotating tool insert and result in the tool

drilling into your body.

p) Clean the ventilation slits on your electric

power tool, regularly. The motor fan draws

dust into the housing and a large accumulation

of metallic dust can cause electrical hazards.

q) Do not use the electric power tool in the

vicinity of ammable materials. Sparks can

ignite such materials.

r) Do not use any tool inserts which require

liquid coolants. The use of water or other

liquid coolants could result in electrical shock.

2.6 FURTHER SAFETY INSTRUCTIONS FOR

CUT OFF GRINDING APPLICATIONS

Kickback and relevant safety instructions

Kickback is the sudden reaction following snagging

or jamming of a rotating grinding disc. Snagging or

jamming lead to an abrupt stop of the rotating tool

insert. This may then cause the uncontrolled electric

power tool to accelerate in the opposite direction to

the inserted tools direction of rotation at the point

were it jammed. If, for example, a grinding disc

snags or jams inside a workpiece, the edge of the

grinding disc which is inside the workpiece may

become caught and thus cause the grinding disc to

jump out or create a kickback. The grinding disc then

moves towards or away from the operator,

depending on the direction of rotation of the disc at

the jamming point. This can also cause a grinding

disc to break. A kickback is the result of improper or

incorrect use of the electric Power tool. It can be

avoided by taking suitable precautions, as described

below.

a) Hold the electric power tool rmly and

place your body and arms in such a

position that you can absorb the force of a

kickback. Always use the auxiliary grips,

when available, in order to have the

greatest possible control over kickback

forces or torque reactions at high speed.

By taking suitable precautionary measures, the

operator can control kickback and reaction forces.

b) Never bring your hand into the vicinity of a

rotating tool insert. The inserted tool could

move over your hand if kickback occurs.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Batavia Racer BT-CS006 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info