758285
10
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
English
8
11.1 Plunge cutting
Plunge cutting may only be used on
soft materials such as wood, aerated
concrete, gypsum plaster boards, etc.
However, this requires a certain practise
and is only possible with short saw
blades.
Place the saw onto the workpiece and
switch it on.
Ensure that the bottom edge of the
footplate rests on the workpiece
surface.
Slowly saw into the workpiece at an
angle, moving the saw to a vertical
position and continue to saw along the
cutting line.
Switch the saw off and lift off the work-
piece when the work is complete.
11.2 Flush sawing
Elastic bi-metal saw blades allow you to
saw protruding objects (e,g, water pipes,
iron bars, etc,) nearby the wall.
Apply the saw blade directly to the wall
and bend slightly so that the footplate
rests against the wall.
Switch the machine on and saw off the
workpiece keeping constant lateral
pressure against the wall.
12. Maintenance and Cleaning
Prior to all work on the reciprocating
saw, rst disconnect the main power
plug.
Keep the saw blade and the saw in a
good and clean condition in order to
work well and safely. Clean the device
of dust and sawdust only with a paint-
brush, cloth or brush. Keep the ventila-
tion openings (7) always clean.
Never use gasoline or other harsh
chemicals or abrasives to avoid damag-
ing the reciprocating saw. Make sure
that no liquids get into the reciprocating
saw.
12.1 Checking and replacing the carbon
brushes
The carbon brushes must be checked regu-
larly. If the carbon brushes are worn, the
machine will start to run unevenly.
Only use the correct type of carbon
brushes.
Remove the carbon brush holders
(3) using a screwdriver.
Clean the carbon brushes.
In case of wear, replace both carbon
brushes at the same time.
Mount the carbon brush holders (3)
using a screwdriver.
After mounting the new carbon
brushes, let the machine run at no load
for 15 minutes.
13. Technical data
Nominal Voltage: . . . . . . . 230 V~ 50 Hz
Nominal Power: . . . . . . . . . . . . 1050 W
Stroke:. . . . . . . . . . . . . .0 – 2500 min-1
Stroke Rate:. . . . . . . . . . . . . . . 28 mm
Length of Power Cord: . . . . . . . . . . 3 m
Weight: . . . . . . . . . . . . . . . . . . 3.4 kg
Sound Pressure Level (LpA): . . . 92.2 dB(A)
Uncertainty: . . . . . . . . . . . . K = 3 dB(A)
Sound Power Level (LWA): . . . . 103.2 dB(A)
Uncertainty: . . . . . . . . . . . . K = 3 dB(A)
Hand Arm Vibration:. . . . . . . .25.65 m/s2
Uncertainty: . . . . . . . . . . . K = 1.5 m/s2
Degree of Protection: . . . . . . . . . . . IP20
Protection Class:. . . . . . . . . . . . . . . .II
13.1 Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given
in EN 60745; it may be used to compare one
tool with another and as a preliminary
assessment of exposure to vibration when
using the tool for the applications
mentioned
using the tool for different applications,
or with different or poorly maintained
accessories, may signicantly increase
the exposure level
the times when the tool is switched off
or when it is running but not actually
doing the job, may signicantly reduce
the exposure level
Protect yourself against the effects of vibra-
tion by maintaining the tool and its accesso-
ries, keeping your hands warm, and organiz-
ing your work patterns.
7062850-Reciprocating_Saw-Ma-1801-08.indb 8 19-03-18 11:09
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Batavia BT-RS004 - 7062850 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Batavia BT-RS004 - 7062850 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 3,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info