EN
page 34
Should the detergent lack, the display will show "DETERGENT LEVEL" (only with optional
"Sensor for Chemicals Low Level").
2.4 Rinse aid use
The machine has a standard rinse aid dispenser. The machine automatically sucks the
product.
The recommended amount is 2-5 cm of product measured on the suction hose.
1 cm of the product drawn into the hose is equal to about 0.13g. A correct amount of rinse
aid is very important for a quick and proper drying.
NB:Excessiveamountofchemicalsorfoamwillreducewashpumpefciency.
Should the detergent lack, the display will show "RINSE-AID LEVEL" (only with optional
"Sensor for Chemicals Low Level").
2.5 Drain pump system
Press the key "E" till the display will show "TANK DRAINING".
The discharge pump will automatically drain the wash-tank.
During the drain process, the button "A"willlightinblueandwillbeashing.
After the draining is complete, the machine will turn automatically in "STAND-BY" mode.
Ifyouwanttorellthemachineforanewcycle,seechap.2.2.
2.6 Regeneration device (optional)
Should the machine be equipped with a water-softener circuit, this will be fully automatic.
Whenneeded,a120”regenerationcyclewillautomaticallyactivate.Duringthisphase,the
display will show the letter "R".
If needed, the "R" cycle can be activated even during the wash-tank loading. If the activation
happens during the wash-cycle, this will be elongated.
RINSE AID
rinse-aid level
tank draining
STAND-BY
R
SALt
detergent level