Pag. 10
USE AND MAINTENANCE MANUAL
GB
“Er.
03”
Thermostop timeout
The boiler temperature did not reach the set point within the extension of
the operating cycle washing phase. The boiler heating is disabled.
Contact the authorised service centre.
“Er.
04”
Tank loading
timeout
Water level inside the washing tank not reached. Turn the machine off
and on, make sure that the overflow pipes are fitted correctly and
that water supply is open, otherwise contact the authorised service
centre.
“Er.
05
Er
06”
Open tank sensor
Broken tank sensor. The tank heating is disabled. Contact the
authorised service centre.
“Er.
07
Er
.08”
Open boiler sensor
Broken boiler sensor. The boiler heating is disabled. Contact the
authorised service centre.
“er
ht
Too high tank
temperature
B4 > MaxTankTemp. The tank heating is disabled.
“Er
Hb”
Too high boiler
temperature
B2 > MaxBoilerTemp. The boiler heating is disabled.
“Er
sf”
Electromechanic
safety
It is likely that a safety thermostat has been triggered.
Turn the machine off and on; should the problem still occur, contact
an authorised service centre.
“Er
09”
Boiler loading
timeout
Problem with boiler water loading, make sure the water supply is correctly
open and that flow rate is suitable, according to machine nameplate
specifications. Turn the machine off and on; should the problem still
occur, contact the service centre.
“Er
01”
Failed rinse cycle
The rinse cycle has not been correctly carried out, check that rinse
spraying nozzles are free from any obstruction.
Should the problem still occur, contact the service centre.
“Er
SL”
Level safety
Problem with water drain. Drain electric pump has not drained correctly.
Check drain tubes; should the problem still occur, contact the service
centre.
“Er rb”
Attempt to reset
error 09
The machine displays this message when attempting to solve boiler
loading problem.
“Er 22”
Tank thermostop
timeout
Problem with boiler water heating. Contact a service centre.
“no
ns”
Salt missing
(warning)
( machines with water softener )
Add salt in the relevant reservoir inside the washing tank
“no
dn”
Detergent missing
(warning)
“no
bn”
Rinse aid missing
(warning)
“no
na”
Softener service
(warning)
( machines with external water softener )
Carry out resin reconditioning.
“no
13”
Break tank empty
(warning)
If this message is displayed quite often, make sure the water flow rate is
correct according to machine specifications.
Warning: By turning the machine off and on again, the warning
resets and thus, if the problem has not been solved, it will be
displayed again.
