796771

Bartscher 700L GN211 - 700505 Handleiding

16
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
2/1GN, 700L - 2/1GN, 1400L
700505 - 700506
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: +49 5258 971-0
Fax: +49 5258 971-120
Technical Support Hotline: +49 5258 971-197
www.bartscher.com
Version: 1.0
Date of preparation: 2019-11-11
EN
700505 1 / 29
Original instruction manual
1 Safety ............................................................................................................ 2
1.1 Explanation of signal words ..................................................................... 2
1.2 Safety instructions.................................................................................... 3
1.3 Intended use ............................................................................................ 6
1.4 Unintended use ........................................................................................ 6
2 General information ....................................................................................... 7
2.1 Liability and warranty ............................................................................... 7
2.2 Copyright protection ................................................................................. 7
2.3 Declaration of conformity ......................................................................... 7
3 Transport, packaging and storage ................................................................. 8
3.1 Delivery check ......................................................................................... 8
3.2 Packaging ................................................................................................ 8
3.3 Storage .................................................................................................... 8
4 Technical data ............................................................................................... 9
4.1 Technical specifications ........................................................................... 9
4.2 List of components of the appliance....................................................... 12
4.3 Functions of the appliance ..................................................................... 13
5 Installation and operation ............................................................................ 14
5.1 Installation .............................................................................................. 14
5.2 Operation ............................................................................................... 16
6 Cleaning and Maintenance .......................................................................... 22
6.1 Safety Instructions for cleaning .............................................................. 22
6.2 Cleaning ................................................................................................. 22
6.3 Maintenance .......................................................................................... 23
7 Possible Malfunctions .................................................................................. 23
8 Disposal ....................................................................................................... 27
Safety
2 / 29 700505
EN
Diese Bedienungsa nleitung besc hreibt die Installa tion, Bedienu ng und Wartu ng des Geräts un d gilt als wichtig e Informationsqu elle und Nach schlagewer k. Die Kenntnis aller enthaltene n Sicherheitshinw eise und Handlung sanweisunge n schafft die V oraussetzung für das sich ere und sac hgerechte Ar beiten mit dem Gerä t. Darüber hin aus müssen die für den Einsatz bereich des G eräts geltende n örtlichen Un fallverhütungs vorschriften und allgemeinen Sicherheitsbesti mmungen eing ehalten werden. Diese Bedienungs anleitung ist Bestan dteil des Produ kts und muss in unmittelbarer N ähe des Ger äts für das In¬stall ations-, Bedi enungs-, W artungs- und Reinig ungsperson al jederzeit zugä nglich auf¬be wahrt werden. W enn das Gerät a n eine dritte Pers on
weitergegeben wird, muss die B edienungsanlei tung mit ausgehä ndigt werden.
This instruction manual contains information about installation, operation and
maintenance of the appliance and constitutes an important source of information
and reference guide. The knowledge of all operational and safety instructions
included in this manual is a prerequisite for safe and proper handling of the
appliance. Additionally, accident prevention, occupational health and safety, and
legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this
instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in
an immediate vicinity of the appliance and be available at all times. The instruction
manual should be transferred together with the appliance.
1 Safety
This appliance has been manufactured in accordance with technical standards
currently in force. However, the appliance may be a source of hazards if used
improperly or contrary to its intended purpose. All persons using the appliance must
consider information included in this instruction manual and observe safety
instructions.
1.1 Explanation of signal words
Important safety instructions and warning information are indicated in this
instruction manual with appropriate signal words. You must strictly follow the
instructions, to prevent accidents, personal injuries and property damages.
DANGER!
The signal word DANGER warns against hazards that lead to severe
injuries or death if the hazards are not avoided.
Safety
700505 3 / 29
EN
WARNING!
The signal word WARNING warns against hazards that may lead to
moderate or severe injuries or death if the hazards are not avoided.
CAUTION!
The signal word CAUTION warns against hazards that may lead to
light or moderate injuries if the hazards are not avoided.
, die
IMPORTANT!
The signal word IMPORTANT indicates possible property damages,
which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines
for the user on usage of the appliance.
1.2 Safety instructions
Electrical current
• Too high a mains voltage or incorrect installation may cause electric shock.
• The appliance may be connected only if data on the rating plate correspond with
the mains voltage.
• To avoid short-circuit, the appliance should be kept dry.
• If there are malfunctions during operation, disconnect the appliance from the
power supply.
• Do not touch the appliance’s plug with wet hands.
• Never take hold of the appliance if it has fallen into water. Immediately
disconnect the appliance from the power supply.
• Any repairs or housing opening may be carried out by professionals and
relevant workshops only.
• Do not transport the appliance, holding it by the power cord.
• Do not allow the power cord to come into contact with heat sources or sharp
edges.
• Do not bend, pinch nor knot the power cord.
• Always completely unwind the power cord.
Safety
4 / 29 700505
EN
• Never place the appliance or other objects on the power cord.
• Always take hold of the plug to disconnect the appliance from the power supply.
Incorrect operati on of the applia nce may cause fir e or explosion h azard due t o ignition of its cont ent.
Fire hazard / flammable materials hazard / explosion hazard!
• Do not use any electric devices in the appliance.
• Do not store nor use petrol or other flammable liquids and gases in the vicinity of
this or any other appliance. Those gases may cause fire or explosion hazard.
• Do not put into the appliance any explosive materials, like sprays filled with
flammable propellants. Contents of containers filled with flammable gases and
liquids may leak in low temperatures, and the contents may catch fire from
sparks generated by an electric appliance. Explosion hazard!
• In the case of coolant leakage, pull the plug from the socket. Remove all
sources of ignition in the vicinity, ventilate room and contact technical service.
Avoid coolant getting in contact with eyes, as it may cause serious eye damage.
• Never use any flammable liquids for cleaning the appliance or its parts. Gases
released may cause fire or explosion hazard.
• In the case of fire, disconnect the appliance from the power supply before
attempting adequate fire-extinguishing actions.
• Never attempt to extinguish fire with water if the appliance is connected to the
power supply. Following extinction of fire, ensure sufficient fresh air inflow.
• Defrosting process may not be sped up with mechanical means or heat energy
sources (candles or heaters) nor with any other means. Vapour produced may
cause short-circuit and too high temperatures may damage the appliance.
• All ventilation slots should not be obstructed during operation.
• Never attempt to damage cooling installation of the appliance.
Operating personnel
• The appliance may only be operated by qualified personnel and trained
specialist personnel.
• This appliance may not be operated by persons (including children) with limited
physical, sensory or mental capabilities, nor by persons with limited experience
and/or limited knowledge.
• Children should be supervised to ensure that they are not playing with or
switching on the appliance.
Improper use
• Unintended or prohibited use may cause damage to the appliance.
• The appliance may only be used when its technical condition is flawless and
allows for safe operation.
Safety
700505 5 / 29
EN
• The appliance may only be used when all connections are executed according
to rules of law in force.
• The appliance may only be used when it is clean.
• Use only original spare parts. Never attempt to repair the appliance on your
own.
• Do not introduce any changes in the appliance nor modify it.
• Do not drill hole in the appliance nor install any objects on it.
• Do not place any heavy objects on the appliance.
Safety
6 / 29 700505
EN
1.3 Intended use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
– Freezing and storage of deep-frozen food products.
1.4 Unintended use
An unintended use may lead to personal injuries or property damages caused by
hazardous voltage, fire or high temperature. The appliance may only be used to
perform tasks described in this instruction manual.
The following is an unintended use:
– Storing flammable or explosive objects and liquids, such as ether,
petroleum or adhesives;
– Storing explosive materials, like sprays filled with flammable propellants;
– Storing pharmaceutical products or preserved blood.
General information
700505 7 / 29
EN
2 General information
2.1 Liability and warranty
All information and instructions in this instruction manual account for legal
regulations in force, current level of technical engineering knowledge as well as our
expertise and experience, developed over the years. If special models or additional
options are ordered, or state-of-the-art technical solutions were implemented, the
actual scope of delivery of the appliance may, in some circumstances, differ from
descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
– failure to observe instructions,
– unintended use,
– technical alterations introduced by the user,
– usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for
improvement of the appliance and its performance.
2.2 Copyright protection
This instruction manual, and texts, drawings and images included in it, as well as its
other components are copyright protected. It is prohibited to reproduce this
instruction manual (including its excerpts), in any form and by any means, and to
use and/or transfer its content to third parties without manufacturer’s written
permission. Violation of the above results in obligation to pay compensation. We
reserve the right to claim further damages.
2.3 Declaration of conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We
may provide relevant Declaration of Conformity upon request.
Transport, packaging and storage
8 / 29 700505
EN
3 Transport, packaging and storage
3.1 Delivery check
Immediately upon reception, check the delivery for completeness and possible
shipping damage. In the case of visible transport damage refuse to accept the
appliance or accept it conditionally. Mark and note the scope of damage in shipping
documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as
compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2 Packaging
Do not dispose of the appliance cardboard box. It may be used to store the
appliance when relocating or when shipping the appliance to our service point in the
case of any damages.
The packaging and its elements are made of recyclable materials. Particularly,
these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3 Storage
Leave the packaging closed until installation of the appliance; observe external
indications concerning method of placing and storage. Store the packaging in the
following conditions only:
– in closed rooms;
– in dry and dust-free surrounding;
– away from aggressive agents;
– in a location protected against sunlight;
– in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the
condition of the packaging and the parts regularly. If needed, replace the packaging
with a new one.
Technical data
700505 9 / 29
EN
4 Technical data
4.1 Technical specifications
Version / Characteristics
• Cooling: circulating air
• Insulation: polyurethane, 60 mm
• Temperature control: thermostatic
• Control: button
• Automatic defrost function
• Evaporation of condensed water
• Digital display
• Thermostat
• ON/OFF switch
• Indicator lights: ON/OFF
• Door type: leaf door
• Door hinge: right (right/left), no possibility of changing
• Type of shelves: grille
• Height-adjustable shelves
• Appliance locked with a key
• Height-adjustable: 2,040 mm to 2,115 mm
Technical data
10 / 29 700505
EN
Name:
Deep freezer 2/1GN, 700L CNS
Art. No.:
700505
Material:
CNS 18/10
Inner material:
Stainless steel
Volume, in l:
700
Temperature range, min.–max., in °C:
-18 - -22
Ambient temperature, max., in °C:
32
Amount of coolant, in kg:
R290 / 0,102
Energy efficiency class:
D (EU Nr. 2015 / 1094)
Climate class:
4
Energy consumption, in kWh/year:
2179
GWP index:
3
Number of doors:
1
Number of shelves:
3
Shelves dimensions (W x D), in mm:
530 x 650
Load-bearing capacity of each shelf in
kg:
40
Power supply:
0,69 kW / 230 V / 50-60 Hz
Dimensions (W x D x H) in mm:
655 x 855 x 2.050
Weight in kg:
106,6
We reserve the right to implement technical modifications!
Technical data
700505 11 / 29
EN
Name:
Deep freezer 2/1GN, 1400L CNS
Art. No.:
700506
Material:
CNS 18/10
Inner material:
Stainless steel
Volume, in l:
1400
Temperature range, min.–max., in °C:
-18 - -22
Ambient temperature, max., in °C:
32
Amount of coolant, in kg:
R290 / 0,100
Energy efficiency class:
E (EU Nr. 2015 / 1094)
Climate class:
4
Energy consumption, in kWh/year:
4855
GWP index:
3
Number of doors:
2
Number of shelves:
6
Shelves dimensions (W x D), in mm:
530 x 650
Load-bearing capacity of each shelf in
kg:
40
Power supply:
1,012 kW / 230 V / 50-60 Hz
Dimensions (W x D x H) in mm:
1.320 x 855 x 2.050
Weight in kg:
191
We reserve the right to implement technical modifications!
Technical data
12 / 29 700505
EN
4.2 List of components of the appliance
Deep freezer 700505
1. Digital temperature regulator
2. Lock
3. ON/OFF switch with integrated
operation indicator light
4. Door
5. Door seal
6. Shelf guides (4x)
7. Shelves (3x)
8. Height-adjustable feet (4x)
9. Housing
Technical data
700505 13 / 29
EN
Deep freezer 700506
1. Digital temperature regulator
2. Lock (2x)
3. ON/OFF switch with integrated
power indicator light
4. Door (2x.)
5. Door seal (2x)
6. Shelf guides (8x)
7. Shelves (6x)
8. Height-adjustable feet (4x)
9. Housing
4.3 Functions of the appliance
The appliance is designed for freezing and long-term storage of deep-frozen food
products.
Installation and operation
14 / 29 700505
EN
5 Installation and operation
5.1 Installation
Unpacking / Positioning
• Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
• If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
• Be careful not to damage the rating plate and warning labels fixed on the
appliance.
• Never place the appliance in humid or wet environment.
• Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
• The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
• Nie należy umieszcz ać urządzeni a w gorącym o toczeniu ani w pobliżu materiał ów łatwopalnych.
• The appliance requir es sufficie nt airflow for proper operation. Ass ure a mini mum lateral clear ance of the appli ance of 10 cm.
• Die Öffnungen am Gerät niemals abdecken od er blockieren.
• Do not place the appliance in direct sunlight or in the vicinity of heat sources
(cooker, radiator, heating devices, etc.). Heat sources may negatively affect
power consumption, and restrict functions of the appliance, too.
• The electric socket should be e asily accessible s o it is possibl e to quickly discon nect the power c ord when nec essary. The electric socket should be e asily accessibl e so it is possibl e to quickly disco nnect the power c ord when nec essary. The electric socket should be e asily accessible s o it is possibl e to quickly discon nect the power c ord when nec essary.
• Nie należy umieszcz ać urządzeni a w gorącym o toczeniu ani w pobliżu materiał ów łatwopalnych.
• The appliance requir es sufficie nt airflow for pr oper operation. Ass ure a minim um lateral clear ance of the appli ance of 10 cm.
• Die Öffnungen am Gerät niemals abdecken od er blockieren.
• Place the appliance so that sufficient air circulation is ensured. Do not block nor
cover ventilation openings in the rear wall of the appliance.
• Leave at least 10 cm clearance from walls and other objects.
• Nie należy umieszcz ać urządz enia w gorącym o toczeniu ani w pobliżu materiał ów łatwopaln ych.
• The appliance requir es sufficie nt airflow for proper operation. Ass ure a minim um lateral clear ance of the appli ance of 10 cm.
• Die Öffnungen am Gerät niemals abdecken od er blockieren.
• In order to avoid damage to the compressor, do not tilt the appliance more than
45° when positioning or transporting it.
Installation and operation
700505 15 / 29
EN
• The electric socket should be e asily accessible s o it is possibl e to quickly discon nect the power c ord when n ecessar y. The electric socket should be e asily accessible s o it is possibl e to quickly discon nect the power c ord when nec essary. The electric socket should be e asily accessible s o it is possibl e to quickly discon nect the power c ord when nec essary.
• Do not position the appliance in high humidity locations. Air relative humidity in
the place of installation should not exceed 60%. Excessive humidity may cause
rust and negatively influence the refrigerating efficiency of the device.
• The appliance should be installed only in rooms, where ambient temperature
does not exceed 32°C.
• To install the appliance, perform the following steps:
– Remove the packaging of the appliance, except for the pallet.
– Lift the appliance with the lift truck and move it to the planned installation
location. Be careful not to damage the appliance. Control the stability in
order not to lose the balance of the appliance.
– Do not drag nor push the appliance, as it may fall down. This may also
cause the damage to external elements or feet.
– As soon as the appliance is in the planned installation location, remove
the pallet.
– Level the appliance by screwing in or out the height-adjustable feet.
– Remove the protective film from the appliance at the end.
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• Prior to first use, the appliance should be installed and left standing upright for at
least 12 hours, before it is connected to power supply.
• After a power failure or when the plug is removed from the socket, do not
reconnect the appliance to power supply for at least 15 minutes.
Installation and operation
16 / 29 700505
EN
5.2 Operation
Tips for the user
• Shelves may be positioned at various heights. Arrange them adequately to
containers with meals and food product packages, so that the inner space of the
appliance is used optimally.
• To limit loss of cold air minimize the opening time of door during operation. Also,
do not open the door too frequently.
• If possible, in the event of a sudden power failure, avoid opening doors in order
to avoid loss of cool air.
• The power supply to the appliance should never be interrupted for more than 10
minutes.
• If the appliance is switched off for a longer period of time, the door of the deep
freezer should remain open.
Freezing of food products in the deep freezer
• Deep-freeze only food products that are suitable to this end and withhold low
temperatures well.
• Deep-freeze only fresh food products.
• A suitable packaging should be selected for each food product and the product
should be packed well. The packaging must be air-tight and impervious to water,
as this could cause the frozen product to dry. Plastic films and bags should soft
and smooth, so that they stick to the contents well.
• Never freeze again any thawed or partially thawed products. Such products
should be processed and consumed within maximum of 24 hours.
• Observe proper indications of the manufacturers as to the freezing of given food
products.
• It is best to freeze products in small portions and thaw them one by one. This
caters for fast and uniform freezing and thawing. Frozen product should be
described with its name and the date of freezing.
• When freezing larger amounts of fresh food products, the temperature in the
appliance may rise temporarily. This does not affect the already stored food
products.
• Do not place bottles filled with liquids in the appliance. Freezing liquids increase
their volumes and may cause bottles to crack.
• Avoid opening of doors during the freezing process.
• Partially or full y thawed food pr oducts should be i mmediatel y used. Low temp erature preserves food products, but it does n ot eradicate mi cro-organism s. They reacti vate at an acceler ated pace and food products turn rapidly. Parti al thawing red uces the nutriti onal value of f ood products, especiall y the nutritional val ue of fruits and vege tables, as well as ready- made meals.
• If the package is damaged or un naturally bulged, it is likely that th e food pro duct has been st ored improperl y and that it is spoiled.
• The power suppl y to the appli ance should never be interrupte d for more than 10 minutes.
•d
Storage of deep-frozen food products in the deep freezer
Installation and operation
700505 17 / 29
EN
• Observe instructions for storage of food products indicated on their packages. If
there are no indications, a food product should not remain in a frozen state for
more than 3 months from the purchase date.
• The packages of food products frozen in the process of their manufacturing
feature storage deadlines and temperatures. It is recommended to follow
manufacturer's indications for storage and usage.
• Select only properly packed food products, provided with full data and store
them in deep freezers in the temperature of -18°C or below.
• When buying deep-frozen food products, transport them in suitable containers to
avoid thawing and refreezing. As soon as possible, place such products in a
deep freezer.
• Do not buy icy products, as icing denotes that they have already been partially
thawed a couple of times.
• Protect food products against thawing and refreezing, as temperature rise
shortens their storage period and deteriorates their quality.
• Partially or fully thawed food products should be immediately used. Low
temperature preserves food products, but it does not eradicate micro-organisms.
They reactivate at an accelerated pace and food products turn rapidly. Partial
thawing reduces the nutritional value of food products, especially the nutritional
value of fruits and vegetables, as well as ready-made meals.
• If the package is damaged or unnaturally bulged, it is likely that the food product
has been stored improperly and that it is spoiled.
Installation and operation
18 / 29 700505
EN
Preparation of the appliance
1. Prior to first operation, clean the appliance and its equipment according to
instructions in section 6 “Cleaning”.
2. To end with, dry the appliance and accessories thoroughly.
3. Introduce the shelves into the appliance at the selected height.
4. Close the appliance door.
5. Plug the appliance into a suitable single socket.
6. Press the ON/OFF switch to “I” position, to switch the appliance on.
The red operation indicator light in the ON/OFF switch comes on.
7. Place the prepared beverages and food products only after the appropriate
cooling capacity has been reached.
The temperature will be shown in the digital display.
Functions of operating elements and displays
The basic temperature setting is factory default and it equals the appliance
operating temperature in the range of -18°C – -22°C.
With normal operation, the set value of the temperature sensor is displayed in the
digital display.
The LEDs in the digital display indicate the status of function activation (Table 1),
and with 3 buttons some functions may be activated/deactivated (Table 2).
Installation and operation
700505 19 / 29
EN
Messages
Assigned
Function
Normal Operation
Start-up
ON
OFF
Flashes
1
Compressor
ON
OFF
Required
ON
2
Fan
ON
OFF
Required
ON
3
Defrosting
ON
OFF
OFF
ON
4
Auxiliary
output
Active output
Inactive output
-
ON
5
RTC clock
RTC available,
activated
(tEN=1) and at
least 1
programmed
time cycle
RTC unavailable
/ deactivated
(tEN=0) and no
programmed
time cycle
-
ON
6
Alarm
Active alarm
No active alarm
-
ON
7
Digits display
Consists of 3 displayed positions with a point and -199…999
interval. See /4, /5, /6 parameters for the sensor
measurement value display, values in °C/°F and a point
Table 1
Installation and operation
20 / 29 700505
EN
Functions of Buttons
Button
Normal Operation
Start-up
Single press of the
button
Combo press
of buttons
1
UP
ON/OFF
– For more than 3
sec.:
interchangeable
display of the
ON/OFF status
Pressed
concurrently:
Activation/dea
ctivation of
continuous
operation
-
3
DOWN
Defrost
– For more than 3
sec.:
Activation/deactivatio
n of defrosting
Pressed
concurrently
: Activation
of
parameter
RESET
procedure
Pressed for
more than 1
sec.: Display
of software
version
2
Set
Mute
– 1 sec.:
Display/setting of the
set value
– For more than 3
sec.:
Access to parameter
configuration (input
password 22)
– Switching off the
sound alarm
(buzzer)
-
Pressed for
more than 1
sec.: EZY
RESET
Table 2
Installation and operation
700505 21 / 29
EN
Setting the set temperature
1. To introduce the setting or to change the set value, perform the following steps:
– press the button and hold it for one seconds — the set value starts
to blink;
– press the or button to increase or decrease the value;
– use the button to confirm the new value.
Automatic defrosting
The appliance is defrosted automatically.
Manual defrosting
Additionally, aside of the automatic defrosting, manual defrosting may be activated.
1. Press the button and hold for at least 3 seconds.
The manual defrosting is initiated.
NOTE!
If introduction of additional settings or modifications of parameter are
necessary, contact technical service.
Switching the appliance off
1. If the appliance is not to be used for a longer period of time, set the ON/OFF
switch to the “O” (OFF) position.
2. Disconnect the appliance from the socket (pull the plug out).
Cleaning and Maintenance
22 / 29 700505
EN
6 Cleaning and Maintenance
6.1 Safety Instructions for cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2 Cleaning
1. Clean the appliance regularly.
2. Remove all objects from the appliance and store them temporarily in a cool
room.
3. Remove all shelves from the appliance.
4. Clean the shelves with mild washing agent and soft cloth or sponge in warm
water.
5. Rinse the shelves with clean water and dry thoroughly with soft cloth.
Note: Never use hot water to clean the appliance.
6. Wipe the internal and external surfaces of the appliance with a soft, damp cloth.
Use mild cleaning agent if required.
7. Wipe the washed surfaces with a cloth moistened in clean water.
8. Finally, dry thoroughly all washed surfaces.
9. The interior of the appliance should be wiped regularly (once a month) with a
food-grade disinfectant.
10. Clean the door and the door seal of the appliance with a soft, damp cloth and
mild cleaning agent. To end with, dry the door and door seal thoroughly.
11. After cleaning, leave the door open for the appliance to dry completely.
12. If the appliance is not to be used for a longer period of time, clean it according to
the instructions above. Leave the appliance open to prevent generation of
unpleasant odours inside.
Possible Malfunctions
700505 23 / 29
EN
6.3 Maintenance
The following operations should be regularly performed by a qualified specialist:
– cleaning the condenser with suitable tools (vacuum cleaner or soft
brush);
– checking of electrical connections;
– checking of the thermostat and the sensor;
– checking of door and door seal.
7 Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
Error
Possible Cause
Solution
No functions
available.
Plug improperly inserted
into a socket.
Remove the plug and insert
it properly in the socket.
Electric power supply safety
fuse damaged.
Check the fuse, connect the
appliance to another socket.
No power supply.
Check electric power
supply.
Damaged socket.
Plug the appliance into
another grounded socket.
Damaged mains power
plug.
Contact the service
company.
Possible Malfunctions
24 / 29 700505
EN
Error
Possible Cause
Solution
Insufficient
cooling
efficiency.
Direct sunlight or heat
sources in immediate
vicinity.
Move the appliance away from
heat sources.
Temperature set incorrectly
The set temperature of the
refrigerators should equal 0°C
and -20°C in the case of
freezers. Press the 'Set' button,
to check or modify the
temperature.
The doors are not closed
properly or they have been
opened for too long.
Close the doors tightly; limit the
door opening time to minimum.
Damaged or deformed door
seal.
Contact the service company.
Poor air circulation around
the appliance.
Keep sufficient clearance from
walls or other objects.
Ambient temperature too
high.
Ambient temperature in the
installation location of
refrigerators should not exceed
+38°C, and +32°C in the case
of freezers.
Food products that are too
worm are placed in the
appliance.
Cool the food products to room
temperature beforehand.
Too little clearance between
objects inside the appliance
or too many objects in the
appliance.
Provide for sufficient clearance
between objects inside the
appliance; remove the excess
of objects.
Possible Malfunctions
700505 25 / 29
EN
Error
Possible Cause
Solution
The appliance
generates
abnormal or
loud noise.
The appliance is not placed
on even surface.
Place the appliance on even
surface.
Loose nuts/screws.
Check all screws and nuts,
tighten them if necessary.
Appliance touches walls or
other objects.
Keep sufficient distance from
walls or other objects.
The following phenomena are not malfunctions:
– Various sounds that are generated by the appliance during operation are
a normal phenomenon and do not indicate any malfunctions.
– Splashing, bubbling and hums are generated by the coolant that
circulates the system.
– Short, louder whirring/hooting or clicking sounds may be heard when the
compressor of the appliance starts.
Alarms and prompts
In the case of the alarm, the proper prompt flashes on the digital display,
interchangeably with the temperature value; also, the buzzer and the alarm replay
(if available) may be activated.
All alarms go off automatically (i.e. alarm prompt is stopped, when the cause for the
alarm is eliminated; only the 'CHt' alarm must be confirmed manually through
switching off and on again of the appliance with the use of button or
disconnection from the mains supply).
When pressed, the button switches off the buzzer; but the displayed alarm
code and the alarm relay are deactivated only when the cause of the alarm is
eliminated. The available alarm codes are listed in Table 3 below.
Alarm
Code
Buzzer and
Alarm Relay
LED
Description
RESET
E0
Active
ON
Sensor 1 error =
regulation
Automatically
E1
Inactive
ON
Sensor 2 error =
defrosting
Automatically
E2
Inactive
ON
Sensor 3 error =
condenser / product
Automatically
Possible Malfunctions
26 / 29 700505
EN
IA
Active
ON
External alarm
Automatically
dOr
Active
ON
Open door alarm
Automatically
LO
Active
ON
Low temperature alarm
Automatically
HI
Active
ON
High temperature alarm
Automatically
EE
Inactive
ON
Appliance parameters
error
Impossible
EF
Inactive
ON
Operation parameters
error
Manually
Ed
Inactive
ON
Defrosting due to
exceeded time limit
With the first,
correctly completed
defrosting
dF
Inactive
ON
Defrosting in progress
Automatically
cht
Inactive
ON
Initial alarm of the soiled
condenser
Automatically
CHt
Active
ON
Alarm of the soiled
condenser
Manually
EtC
Inactive
ON
Alarm of timers
Through the setting
of a timer
Table 3
Disposal
700505 27 / 29
EN
8 Disposal
Electrical appliance
Electric appliances are marked with this symbol. Electrical
appliances must be disposed of and recycled in a correct
and environmentally friendly manner. You must not dispose
of electric appliances with household waste. Disconnect the
appliance from the power supply and remove power cord
from the appliance.
Electrical appliances should be returned to designated collection points.
Coolant
The propellant used in the appliance is flammable. It should be utilised pursuant to
national regulations in force.
… 16 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bartscher 700L GN211 - 700505 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bartscher 700L GN211 - 700505 in de taal/talen: Engels als bijlage per email.

De handleiding is 0.64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Bartscher 700L GN211 - 700505

Bartscher 700L GN211 - 700505 Gebruiksaanwijzing - Nederlands - 29 pagina's

Bartscher 700L GN211 - 700505 Gebruiksaanwijzing - Deutsch - 29 pagina's

Bartscher 700L GN211 - 700505 Gebruiksaanwijzing - Français - 29 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info