727948
54
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
R5900099 /03 CX-2054
Problem Cause Solution
Windows tries to assign the
ClickShare drive to an already
reserved drive letter
Use Microsoft Windows Disk
Management to assign it to a free
drive letter.
Bad block on the mass storage Please re-pair the Button with the
Base Unit to restore the flash
I cannot start the ClickShare App Running 3rd party applications is
blocked by IT
Contact your IT responsible.
In the meantime, you can share
your screen using your devices
native protocols
You are using a Linux PC or
ChromeBook
Use the devices native protocols
to share on screen
Button LEDs are blinking Clickshare Application has not
been started
Start the application on the
ClickShare Buttons mass storage
or download and run the
ClickShare Desktop App.
Screen is not shown when
pressing the Button although
Button LED is static white.
Already two people on screen Long press the Button to kick off
all other sources from screen.
Or ask for somebody to remove its
source from screen
Somebody is moderating the
session
Request the moderator to put you
on screen or claim the moderation
role from the ClickShare
application
Your shared content becomes
grayed out.
Connection between the
ClickShare application (or Button)
and the Base Unit is lost
ClickShare tries to restore the
connection automatically.
If this fails, the LEDs of the Button
start blinking red. You should
unplug the Button from your laptop
and start a new
Button cannot connect to the Base
Unit. Button LEDs keep spinning.
Button is not paired to correct
Base Unit.
Pair the Buttons with the Base Unit
.
Base Unit settings have changed
and Button has not been paired
again.
Pair the Buttons with the Base
Unit.
When network integrated, the
Button cannot find the Base Unit.
IP address of the Base Unit has
changed.
Pair the Buttons with the Base
Unit.
The Button cannot connect to the
Base Unit due to firewall settings.
Contact your IT responsible.
Quality of the image displayed is
not satisfactory.
Button is using a channel with high
utilization.
Contact your IT responsible.
Base Unit antennas are
obstructed.
Make sure no insulation or metal
plating or a cage is placed around
the Base Unit. If too far, place the
Base Unit closer to the location of
the Buttons. Preferably, have line
of sight between Base Unit and
Button.
Low signal strength Place the Base Unit closer to the
location of the Buttons. Check the
settings of the Base Unit to see if
the power of the wireless signal
has not been set too low.
Troubleshooting
54

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Barco ClickShare CX-20 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Barco ClickShare CX-20 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Barco ClickShare CX-20

Barco ClickShare CX-20 Gebruiksaanwijzing - Deutsch - 58 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info