28
Socket panels
The rear socket panel on BeoVision 5
allows you to connect signal input
cables as well as a variety of extra
equipment, such as a DVD player or
a Bang & Olufsen audio system.
The V.TAPE, AV and DECODER
sockets are available for connection
of extra equipment.
Any equipment you connect to these
sockets must be registered in the
BeoVision 5 Connections menu.
Refer to the chapter Register
additional video equipment on page
26 for further information.
Speaker and digital input socket
panel
FRONT
The two sockets are used for connecting the
external front speakers in a surround sound
setup.
REAR
The two sockets are used for connecting the
external rear speakers in a surround sound
setup.
SUBWOOFER
Socket used for connecting a BeoLab 2
subwoofer in a surround sound setup.
INPUT 1
Digital input socket (S/P DIF) for connection of
e.g. a DVD player. INPUT 1 is for digital input
from equipment connected to the AV socket
on BeoVision 5.
INPUT 2
Digital input socket (S/P DIF) for connection of
e.g. a DVD player. INPUT 2 is for digital input
from equipment connected to the V.TAPE
socket on BeoVision 5.
AV and aerial socket panel
V.TAPE
21-pin socket for the connection of a
BeoCord V 8000 video tape recorder.
AV
21-pin socket for the AV connection of other
equipment, e.g. a DVD player, a set-top box*,
a second decoder (neither MAC nor baseband
decoders may be connected here).
DECODER
21-pin socket for the connection of a
secondary set-top box or a primary decoder.
The socket provides the opportunity to
connect either an AV decoder or an RF
decoder.
The socket may be used for an AV 2 Expander
instead, which gives the opportunity to
connect a decoder, compact disc video player
(CDV), and other non-Bang & Olufsen
auxiliary video equipment at the same time.
MASTER LINK
Socket for connection of a compatible Bang &
Olufsen audio system.
