enter the code and press the centre button to confirm.
3. If you select Off, enter your four-digit pin code and press the centre button to
save.
If you inadvertently press a wrong button while entering a code, press the yellow button
to delete a digit or press the red button to clear an input field.
Change your pin code
You can change your pin code at all times. If the pin code system is already activated,
you are prompted to enter your pin code when you bring up the Pin code menu.
Change the pin code ...
1. In the Pin code, menu select New pin code.
2. Enter your pin code and press the centre button.
3. Enter a new four-digit pin code, then press the centre button.
4. Re-enter the new pin code and press the centre button to confirm.
If you inadvertently press a wrong button while entering a code, you can select Clear to
clear the input field.
If you change your pin code more than five times within a three-hour period, the Pin
code menu becomes inaccessible for three hours, provided that the television is not
disconnected from the mains. Disconnecting the television resets the three-hour period.
Switch Off Timer
In the Switch Off Timer menu, you can set the television to switch off automatically after
some time without operation. The factory setting is 4 hours. This function only applies in
video mode, not in audio mode.
Settings
General settings
Switch Off Timer
...
When Switch Off Timer is activated, a message appears on your TV screen if the
television has not been operated during the time set in the menu. The television then
switches to standby if you do not operate it.
When no source signal has been detected for 10 minutes, the television may switch to
standby.
Advanced settings
Make advanced settings
Make advanced settings for the TV guide and HbbTV feature.
Settings
General settings
Advanced
...
57
