98
Startup conrmation
Following the loading of the conguration les the unit will report:
WTP3 Startup Complete.......
Serial Port Cong
Each serial port is congured with the settings dened in the conguration les. The following message types
are displayed if the serial devices are congured correctly:
Serial Device : Channel 0 Device 8 Port 0 Congured Successfully
Serial Device : Channel 1 Device 4 Port 0 Congured Successfully
Serial Device : Channel 1 Device 4 Port 1 Congured Successfully
Data Time-out
The following warnings are printed after the startup is complete. They indicate the data in the system is missing
or gone stale. i.e. the data has not been updated within the allowable time-out period.
Warning: “Heel1” is stale, 2.5Sec expired since last update
If this warning appears shortly after startup it usually indicates the data has been dened but no physical
data is on the system. For example, “Heel1” has been dened in sample.d as being an analogue input on CAN
channel 0, Device 1, analogue channel 1. So if the following warning appears it may indicate that we have either
referenced the wrong analogue module (either CAN channel, Device ID or analogue channel) or the device is not
transmitting data on the CAN channel for some other reason.
Datalog Status
Details the conguration of the datalog manager following startup.
Datalog Manager Initialised [datalog manager started]
Start : Racetimer [datalog will start with racetimer]
Duration: 60 [datalog will run for 60 minutes]
Alarm Status
Details the conguration of any alarms (.alm les) in use following startup.
Alarm Cong :
Depth 67 ENABLED [Depth alarm, variable 67 is enabled]
TW_Speed 17 DISABLED [TWS alarm, variable 17 is disabled]