784763
22
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
Manufactured under one or more of these patents.
U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2, Canadian Patent: 2342614,
Australian patent: 2373248 other patents both foreign and domesc applied for and pending. All material copyright of Balboa Water Group.
42281_A | Compable with SpaTouch 1 & 2 22 03.17
Utilities
GFCI Test Feature
CE Product
Reset Button:
Forcing the GFCI Trip Test
(North America Only)
Warning:
The Ground Fault Circuit Interrupter (GFCI) or Residual
Current Detector(RCD) is an important safety device and is
required equipment on a hot tub installation.
(The GFCI Test Feature is not available on CE rated systems).
Used for verifying a proper installaon
Your spa may be equipped with a GFCI Protection feature. If
your spa has this feature enabled by the manufacturer, the
GFCI Trip Test must occur to allow proper spa function.
On some systems:
On those systems that automatically test the GFCI within 1 to
7 days after startup:
The end-user must be trained to expect this one-time test
to occur. The end-user must be trained how to properly
reset the GFCI. If freezing conditions exist, the GFCI or RCD
should be reset immediately or spa damage could result.
CE registered systems do not have an RCD Test Feature due
to the nature of the electrical service. Some UL registered
systems do not have the GFCI Test Feature activated. The
end-user must be trained how to properly test and reset
the RCD.
Only use the Reset Button prior to moving the spa to a new
location. Pressing the Reset the button forces a new Test to
be performed at the new location.
The installer can cause the GFCI Trip Test to occur sooner by
pressing Test on the GFCI Test screen.
The GFCI should trip within several seconds and the spa
should shut down. If it does not, shut down the power and
manually verify that a GFCI breaker is installed and that the
circuit and spa are wired correctly. Verify the function of
the GFCI with its own test button. Restore power to the spa
and repeat the GFCI Trip Test.
Once the GFCI is tripped by the test, reset the GFCI and the
spa will operate normally from that point. You can verify a
successful test by navigating to the above screen. “Passed”
should appear after the Reset line is selected on the GFCI
screen.
Within 1 to 7 days after startup, the spa will trip the GFCI to
test it. (The number of days is factory programmed.) The GFCI
must be reset once it has tripped. After passing the GFCI Trip
Test, any subsequent GFCI trips will indicate a ground fault or
other unsafe condition and the power to the spa must be shut
off until a service person can correct the problem.
Touching the GFCI Test Icon on the Utilities Screen takes
you to the GFCI Test screen..
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Balboa SpaTouch2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Balboa SpaTouch2 in de taal/talen: Engels als bijlage per email.

De handleiding is 2.12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info