464024
9
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
9
2.Turn the rotary selector to set the microwave power setting.
3.Press the 0 button and set the cooking time using the rotary
selector. Set the oven.
4.Press the button and set the type of heating using the
rotary selector.
5.Press the [ button and use the rotary selector to set the
temperature.
6.Press the @ button to start the appliance.
Note: You can also set the oven first, and then set the
microwave using the
! button.
Changing the temperature and cooking time
Once the appliance has started, you can change the
temperature and cooking time at any time:
Press the
[ button and change the temperature using the
rotary selector.
Press the
0 button and turn the rotary selector to change the
cooking time.
To delete all settings, press and hold the
@ button for
4 seconds. You can now make new settings.
Setting a later end time
See the section entitled Time-setting options - Setting a later
end time.
Pause
Press the
@ button or open the appliance door. The appliance
interrupts operation. The
@ button flashes.
Close the microwave door and press the
@ button to continue
operation.
When the cooking time has elapsed
A signal sounds.
Press the
0 button to cancel the signal before it sounds.
Open the appliance door and carefully remove the cookware
with oven gloves.
Press the
# button to switch off the appliance.
Cancelling operation
Press the
# button to cancel operation and switch off the
appliance.
Time settings
You can call up the time settings using the 0 button. You have
the following options:
When the oven is switched off
Q = Set timer
0 = Set clock
When the oven is switched on
Q = Set timer
x = Set cooking time, if necessary
y = Set a later end time, if necessary
0 = Show clock
Short audible signal
If you cannot change or set a value, you will hear a short
audible signal.
Set timer
The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time.
1.Press the 0 button. The arrow is pointing to the WO timer
symbol.
2.Set the running time for the timer using the rotary selector.
You will then see the timer counting down on the clock display
for a few seconds. Then it switches to the background. The
W
symbol indicates that a timer is counting down.
When the time has elapsed
A signal sounds. 00:00
WO appears in the clock display. You
can cancel the signal early by pressing the
0 button.
Calling up the time for the timer
Press the
0 button. The time is displayed for a few seconds.
Cancelling the timer time
Press the
0 button and turn the time back to 00:00. The timer
time is cancelled after a few seconds.
Changing the timer time
Press the
0 button. Change the time for the timer using the
rotary selector.
Setting the cooking time
If you set the cooking time for your dish, operation stops
automatically once this time has elapsed. The appliance stops
heating.
Prerequisite: The type of heating and temperature must be set.
Example in the diagram:
Setting for
% Top/bottom heating, 180 °C, cooking time
45 minutes. Operation has not yet been started.
1.Press the 0 button twice.
The cooking time
xO is selected.
2.Set the cooking time using the rotary selector.
The cooking time is adopted after a few seconds. The
brackets around the cooking time disappear. The
xO
symbol lights up.
3.If the operation has not yet started, press the @ button.
LH

I NJO

LHI NJO
¡$

LHI NJO
¡$
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Balay 3HW459X bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Balay 3HW459X in de taal/talen: Engels als bijlage per email.

De handleiding is 1,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Balay 3HW459X

Balay 3HW459X Gebruiksaanwijzing - Deutsch - 32 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info