549160
12
Verklein
Vergroot
Pagina terug
1/157
Pagina verder
8
mode, surround mode selected, stereo mode selected
and wide stereo mode selected.
3.3 Switching On and Using Panorama
Ensure that the DVD player is connected to Panorama
Input 1, switched on and correctly set up with a disc
playing. In its default setup Panorama will switch on
automatically when an input signal is present on Input
1. It will also automatically select Input 1 together with a
default group of setup parameters that have been
specifically chosen to provide good initial performance
in a typical domestic environment. If a signal is present
on Input 1 Panorama will immediately reproduce it.
Note: If no sound is reproduced either the input cable is
plugged-in to the wrong input socket or there is no
output signal from the DVD. Select Input 2 using the
remote handset to check the former. To check the latter,
disconnect the input cable from Panorama and examine
its end. A faint red light shining from the end of an
optical cable confirms that a signal is present.
Once reproducing audio satisfactorily, use the Panorama
handset or front panel controls to raise or lower the
volume, select inputs or select audio decode modes. The
following paragraph describes audio decode modes.
3.4 Audio Decode Modes
Audio from DVD, videotape and, on occasions,
broadcast sources can be encoded with a variety of
surround sound formats. Panorama is capable of
decoding Dolby Digital, DTS, Dolby PLII surround sound
formats as well as providing conventional and “wide
stereo reproduction. Not all decode modes however
can be used with each Panorama input or with each
programme material format. Figure 11 illustrates the
decode modes available with each programme material
format and Panorama input.
Panorama will detect Dolby Digital and DTS encoded
programme material and automatically select the
appropriate decode mode. With other programme
material, digital or analogue, the most likely appropriate
decode modes are highlighted in the table. The
Panorama display will show SURR when surround
modes are engaged, STEREO when conventional stereo
is engaged and WIDE when wide stereo is engaged.
digital or analogue material is reproduced, voice mode
implements a custom B&W designed filter algorithm.
The Panorama control panel, illustrated in Figure 10,
incorporates a display, a standby/input button, a
decode mode button and volume adjustment buttons.
The display illustrates the currently selected Panorama
input until a function button is pressed. It will then
display the selected function for a short time. The
display also incorporates six indicators which illuminate
to indicate the currently selected programme decode
Setup Mode. See the Panorama Setup
sections for more information.
mode Selects Panorama home theatre programme
decode modes.
Lowers Panorama volume.
Selects Panorama inputs.
Note: When reproducing Dolby Digital encoded
material, voice mode implements the compression and
filter algorithm inherent in the encoding. When other
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw BW Panorama bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van BW Panorama in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 8,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info