Synergy 2110 - Edition 5 – 23rd October ’00 (3375)
7
Safety instructions
Use only the approved battery
pack supplied. Spare batteries –
Item Code: 871996 are available
from BT Shops and the Synergy Helpline
0845 602 1041.
Do not try to use any other power supply
except the one provided, otherwise you
may permanently damage your Synergy
2110. It may also invalidate the guarantee
of this apparatus. To get a replacement
Synergy 2110 base station power supply
unit – Item Code 872273 – contact the
Synergy Helpline
0845 602 1041.
Do not open the handset or base station.
This could expose you to high voltages or
other risks. Contact the helpline for all
repairs.
There is a slight chance your
phone could be damaged by an
electrical storm. We recommend
that you unplug your Synergy 2110 from
the mains power and telephone socket
during storms.
The Synergy 2110 will produce a
certain amount of heat during
operation. Equally, the handset as
well as any additional chargers you
purchase can also become warm during
charging. We advise against placing these
products on antique, veneered or wooden
surfaces as damage may occur.
Do not use the Synergy 2110 in
damp, humid conditions such as
bathrooms. Do not expose the
equipment or batteries to fire and water.
Do not dispose of used batteries
with general household rubbish
and do not burn them.
Do not use the handsets in places
where there are explosive
hazards.
If you wear a hearing aid, please
note that the Synergy 2110 works
by sending radio signals between
the base station and handset. These
signals may interfere with some hearing
aids, causing a humming noise.
Synergy 2110 can interfere with other
electrical equipment, e.g. answering
machines, TV and radio sets, clock
radio/alarms and computers if placed too
close. It is recommended that you place
your Synergy 2110 at least one metre away
from such appliances to minimise any risk
of interference.
Make sure you connect the power and
telephone lines to the correct sockets in
the base station.
Clean the handset and base station with a
damp (not wet) cloth or antistatic wipe.
Never use a dry cloth as this may cause a
static shock. Never spray cleaning fluid
directly onto the telephone.
SAFETY INSTRUCTIONS
