When the handset is not in use you
can adjust the ringer volume.
The handset ringer volume has
3 settings, HIGH, LOW and OFF.
To switch the ringer volume to OFF,
press and hold the VOLUME button
until you hear a confirmation beep.
The Freestyle 70 is pre-set to HIGH.
To change the volume on the handset
press and release the VOLUME button.
On each press you will hear a sample
ring.
Press the buttons in the order shown:
Lift the handset off the base unit.
Press the TALK button. The TALK light
comes on. The POWER / IN USE light
on the base unit flashes.
Listen for the dialling tone.
KEYPAD
Dial the number you want.
Making and receiving calls
Using your
Freestyle 70
telephone
Press the TALK button.
Or
Replace the handset on the base unit.
When the phone rings:
If your handset is on the base unit,
simply pick it up to answer the call.
Or
If your handset is off the base unit,
press the TALK button to answer the
call.
PLEASE NOTE
If you do not hear a dialling tone after pressing
the
TALK button, wait a few seconds. On a few
exchanges, there may be a delay.
PLEASE NOTE
An Inductive Coupler has been built into the
handset to improve sound quality for people
using hearing aids. Switch your hearing aid to
T and adjust the position of the handset until
you get the best reception.
PLEASE NOTE
The handset range is up to 200 metres from
the base unit in ideal conditions. If you start to
go out of range while using the phone, you will
hear warning beeps. If you do not come back in
range, your call will be disconnected.
Your Freestyle 70 automatically scans
the available radio channels for quality
of reception, and selects the best one
to use.
If you experience interference during
your call, press the CHANNEL button
to select a different channel.
To make a call
To end a call
To receive a call
To use the channel button
