49
• Drill two holes for the screws and
insert the wall plugs provided (if
required).
• Drive the screws into the wall,
leaving about 5mm free on which
to mount the phone.
• Make sure that the power supply
and the telephone cables are
connected to the base unit, then
fit the cables into the channels on
the bottom of the base unit.
• Clip the bracket onto the base
unit as shown on the next page.
• Hook the bottom hole of the
bracket and the top hole on the
back of the base unit over the
screw heads.
Your Freestyle 1200 can be wall-
mounted by using the bracket
provided.
Use the template on page 51 to
mark where the screws should go
into the wall.
Wall mounting
Spare parts for your Freestyle 1200
are available from your BT shop or
supplier, or you can contact us on
Lo-call 0845 7697146 between 9.00am
and 5.30pm Monday to Friday.
Before you wall-mount your Freestyle
1200, check that:
• the wall can support the weight of
the base unit and handset;
• the position you choose leaves
sufficient space so that the base unit
(which is larger than the bracket) is
clear of any obstruction on the wall,
such as a shelf or cupboard. Room
should be left so that the handset can
be placed on charge without
touching any obstructions.
• leave enough room for the aerial to
be fully extended when wall mounted.
Attach the bracket by
hooking it over the screws
protruding from the wall.
