40
To switch the confirmation tones on
and off
Whenever you confirm a new setting,
your handset gives a long confirmation
beep. You can switch these beeps on
and off.
• Press the SET button.
• Press the 1, then the 3 buttons.
• Press the OK ( ) button.
• Press 0 to switch the tones off.
Or
• Press 1 to switch the tones on.
• Press the OK ( ) button to confirm.
• Press the RED PHONE button to
return to standby.
To switch the handset button beeps
on and off
Whenever you press a button on the
phone you hear a beep. You can switch
these beeps on and off.
• Press the SET button.
• Press the 1, then the 4 buttons.
• Press the OK ( ) button.
• Press 0 to switch the beeps off.
Or
• Press 1 to switch the beeps on.
• Press the OK ( ) button to confirm.
• Press the RED PHONE button to
return to standby.
To adjust the ringer volume in the
base station
You can choose the ‘crescendo’ ring that
gradually increases in volume, plus 5
additional levels: 1 = lowest; 5 = loudest;
and 0 is off.
• Press the SET button.
• Press the 0 button.
• Press the 5 button.
• Press the OK ( ) button. The ringer
sounds and the current setting is
displayed.
• Use the keypad to enter the setting
you want:
Volume =1-5 (1 is the lowest).
Crescendo = 6.
Off = 0.
• Press the OK ( ) button to confirm.
• Press the RED PHONE button to
return to standby.
To adjust the melody of the base
ringer
There are 10 levels.
• Press the SET button.
• Press the 0 button.
• Press the 6 button.
• Press the OK ( ) button.
You hear the current melody and the
display shows the current setting.
• Press a button 0-9 until you hear the
melody you want.
• Press the OK ( ) button to confirm.
• Press the RED PHONE button to
return to standby.
