Making and
receiving calls
To make an external call
Ensure the handset is switched ON.
• Press the PHONE button. You will hear
the dial tone. The ‘In Use’ light on the
base station comes on.
• Dial the number. The phone calls the
number and the display shows the
number you have dialled.
Alternatively, you can enter the phone
number you want first, check that it is
correct, and then press the PHONE
button to dial.
To end a call
• Press the END CALL button.
Or
• Place the handset back on the base
station.
To receive an external call
When the phone rings the display
flashes EXT.
• Press the PHONE button on the
handset and speak.
Or
• If the handset is on the base station or
charging station, simply lift it up and
speak. You do not need to press the
PHONE button.
• At the end of the call, either press
the END CALL button or replace the
handset on the base station.
To redial the last external number
• Press the PHONE button.
• Press the LNR button. The last
external number you called will be
redialled automatically.
• Press the END CALL button at the end
of your call, or replace the handset on
the box.
To redial any of the last 5 external
numbers
• Press and release the LNR button until
the number you want is displayed.
• Press the PHONE button to dial.
• To end the call, press the END CALL
button or replace the handset on the base.
Call timer
Your Diverse 2010 automatically times
the duration of all external calls. The
handset display shows the call duration
both during your call and for a few
seconds after it is completed.
