BT Diverse 5300 – Edition 1 – 1st September ’03
BT Diverse Helpline – 08457 908 070
41
HANDSET SETTINGS
To switch walk and talk mode
on and off
To switch walk and talk on:
Press the MENU options
button.
Press the DOWN navigation
button until the display shows
Additional Features
.
Press the OK options button.
Display shows
Room Monitor
.
Press the DOWN navigation
button until the display shows
Walk and Talk
.
Press the OK options button.
You will hear a tone and the
display will show
Walk and Talk
.
To switch walk and talk off:
Press the MENU options
button.
Display shows
Walk and Talk
Off
.
Press the OK options button.
The display will return to the
idle screen.
Enter an available number.
If the number is already
assigned to another handset
you hear a beep. Select another
number.
If required, press the UP or
DOWN navigation button to
select another handset and use
the Keypad to change the
number.
Press the OK options button
to confirm.
Press the RED PHONE button
until you reach the idle display.
OK
• The handsets are registered to
different bases but are both set to
Best Base
.
• One of the handsets is not registered
and the other handset is registered as
Best Base
.
• Neither handset is registered.
Walk and talk
If you have more than one Diverse 5000
handset then you can use the walk and
talk mode. This allows two handsets to
communicate with each other outside
the range of the base station. When they
are out of range, however, they cannot
receive external calls. The maximum
range between the communicating
handsets is 300 metres outdoors in
ideal conditions. Please note that
batteries are used more quickly in walk
and talk mode.
Communication between two handsets is
possible when:
• Both handsets are registered to the
same base and have currently
selected that base.
MENU
OK
OK
MENU
OK
