If you experience any problems, please visit bt.com/producthelp
6 Getting started
Location
You need to place your BT Converse 2300 within 3 metres of a telephone and
mains power socket so that the cables will reach.
Your BT Converse 2300 can be wall mounted, see ‘Wall mounting your phone’
page 32.
Setting up
Connect the mains power supply
1. Plug the lead of the mains power adaptor (item code 084721 white and
066270 black) into the socket marked on the underside of the phone and
route the cable as shown.
WARNING
Do not place your BT Converse 2300 in the
bathroom or other humid areas.
Other electrical equipment close to your
Converse could have an adverse effect on call
quality. If you experience buzzing during a call
try moving the Converse away from any electrical
equipment that may be nearby.
IMPORTANT
Only use the handset and telephone line cord and
the mains power adaptor supplied or this product
may not work.
Using broadband on the same phone line?
To avoid problems with your broadband or
noise on your phone line, you might need to
plug it into the wall socket via a microfilter
(not supplied).
If your main phone socket
has a single socket, as
shown, you’ll need to use
microfilters.
You don’t need to use
microfilters if your main
phone socket has two
separate sockets, like these:
