650207

BT BT1000 Handleiding

16
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
UK’s best selling phone brand
†
Quick Set-up and User Guide
BT1000
Digital Cordless Phone
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Important – please read first2
• Only use the line cord, power supply (item code 066773) and the rechargeable
batteries supplied with your phone.
• Make sure that the power supply is connected to a known working socket.
• Connect your phone to the power supply and allow the batteries to charge for
24 hours before connecting the line cord to your telephone socket.
• To make sure you get the best range and reception from your handset, avoid
interference by placing the base unit away from large metal objects such as
fridge freezers and microwave ovens or electronic products such as computers
and TVs.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
3
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Check box contents
AB
C
GH
I
JK
TU
V
MN
O
DE
PQ
RS
WX
YZ
Vol.
Calls
R
Menu
Intercom
Handset 1
3.22pm 03/11
Handset Base
Telephone line cord
(already fitted)
AB
C
GH
I
JK
TU
V
MN
O
DE
PQ
RS
WX
YZ
Vol.
Calls
R
Menu
Intercom
Handset 1
3.22pm 03/11
Handset Charger
Mains power adaptor
(item code 066773)
2 x AAA 500mAh
rechargeable batteries
(already in handset)
Mains power adaptor
(item code 066773)
2 x AAA 500mAh
rechargeable batteries
(already in handset)
IMPORTANT
Only use the mains power adaptors, cables and rechargeable batteries supplied in this box or this
product might not work. Any replacement rechargeable batteries must be of the same type.
BT accepts no responsibility for damage caused to your BT1000 if you use any other type of batteries.
Contents for each additional handset (multipacks only)
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Where to put your phone
• Place the base within
3 metres of a mains power
socket and 2 metres of a
phone socket so the cables
will reach.
• Make sure it’s at least a
metre away from other
electrical appliances to
avoid interference.
• Don’t place the phone or
base in a bathroom or
other humid area.
• The product works by
sending radio signals
between the handset and
base. The strength of the
signal depends on where you
position the base. Putting it
as high as possible can help
give you the best signal.
IMPORTANT
• Don’t connect the phone line
to a phone socket until the
handset is fully charged.
• The base station should
be plugged into the mains
power socket all the time.
1. Plug the mains power
adaptor (item code
066773) into the
base, with the cable
clipped in the grooves
provided.
2. Plug the other end
of the power adaptor
into the wall power
socket and switch on.
Quick set-up guide4
1 Plug in
The phone line cord is already fitted but don’t
plug the other end into the wall socket yet.
1
Quick set-up guide 5
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Talk/Standby time
Under ideal conditions, the
handset batteries should give
up to 12 hours talk time or
120 hours standby on a single
charge. (This doesn’t mean you
can unplug the base or leave
the handset for this length of
time without charge).
Please note that new Ni-MH
rechargeable batteries don’t
reach full capacity until
they’ve been in normal use
for several days.
Battery low warning
The
icon will flash and you
will hear a warning beep every
minute, to indicate that you
need to recharge your handset
before you can use it.
Quick set-up guide 5
2 Charge
1. Activate the batteries by pulling the plastic tab
away from the back of the handset.
Rechargeable batteries
already fitted
Remove this tab
and charge batteries
for 24 hours before use.
2. Place the handset on the base to charge.
3. After 24 hours, plug the phone line cord into the
phone wall socket.
IMPORTANT
We recommend that you charge the handset
batteries for 24 hours before first use.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Quick set-up guide6
Battery performance
• To keep the batteries in the
best condition, leave the
handset off the base for a
few hours at a time.
• After charging your handset
for the first time, subsequent
charging time for the
batteries is approximately
6-8 hours.
• The charge capacity of
rechargeable batteries will go
down over time, which will
reduce the talk and standby
time. Eventually they’ll need
replacing. For details on how
to get replacement batteries,
call the helpline on 0800
218 2182*.
Set up your additional handsets (multipacks only)
1. For additional handsets and chargers: plug the
mains power adaptor into the back of the charger
and plug the other end into the mains wall socket
and switch on the power.
2. Activate the batteries as explained on page 5.
3. Place the handset on the charger to charge for
24 hours.
If you ever need to remove the batteries, simply
slide open the battery compartment cover and
ease out the batteries.
1
Quick set-up guide 7
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
3 Go!
Your BT1000 is now ready
for you to use
• For help setting the date and time, go to page 28-29.
• For instructions on making a call, go to page 16.
• For help personalising your phone’s settings, go to
page 28.
Or, you may find the answer in the Help section
on page 44 or see our online frequently asked
questions at
bt.com/producthelp
Alternatively, call the Helpline on 0800 218 2182*.
Quick set-up guide
7
Using your BT1000 on
a broadband line?
If so, you need to fit an ADSL
microfilter between the phone
line cord and the phone
socket. You can get BT
ADSL microfilters from
bt.com/shop
If you use BT Infinity you
will not need to use an ADSL
microfilter. For other types of
broadband, please check with
your provider if a microfilter
is required.
If you cannot find the answer
to your problem in this user
guide, then please call our free
Helpline on 0800 218 2182*.
Our dedicated advisors are
more likely to be able to help
you than the retailer where you
made your purchase.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
8 In this guide
Getting to know your phone
Handset buttons
.................................... 10
Handset display and icons
...................... 12
Base
...................................................... 13
Finding your way around your phone
...... 14
Menu map
............................................. 15
Using the phone
Switch the handset on or off
................... 16
Make an external call
............................. 16
Preparatory dialling
............................... 16
End a call............................................... 16
Receive a call
......................................... 16
Call Waiting
........................................... 17
Incoming speech volume
........................ 17
Mute
..................................................... 18
Redial
................................................... 18
View or dial a number in the redial list
..... 18
Copy a redial number to your contacts
.... 19
Delete a number in the redial list
............. 19
Delete the entire redial list
...................... 19
Voicemail (BT 1571)
...............................20
Keypad lock
........................................... 20
Turn the handset ringer on or off
............. 20
Find handset (Paging)
............................ 20
Contacts
Store a contact name and number
.......... 21
Character map
....................................... 21
View/dial a contact
................................ 22
Edit a contact entry
................................ 22
Delete a contact entry
............................ 23
Delete all contacts
................................. 23
View the contact memory status
............. 23
Speed dial
Save a speed dial entry
...........................24
Dial a speed dial entry
............................ 24
Caller Display and the Calls list
Caller Display
......................................... 25
Calls list
................................................. 25
Missed call notification
........................... 26
View/dial an entry in the calls list
............ 26
View the call details
...............................26
Save a Calls list entry to your contacts
..... 27
Delete an entry in the Calls list
................ 27
Delete the entire Calls list
.......................27
Handset settings
Set the time format
................................ 28
Set the time
........................................... 28
Set the date
........................................... 29
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
In this guide 9
Set an alarm or turn on or off ..................29
Stopping the alarm when it goes off
........ 30
Set the handset ringtone for
external or internal calls
.........................31
Set the handset ringer volume
................ 31
Turn the handset tones on or off
.............32
Change the handset name
...................... 32
Turn auto answer on or off
......................33
Select a base
......................................... 33
Base settings
Set the base ringtone
............................. 34
Set the base ringer volume
..................... 34
Delete a handset
.................................... 35
Change the system PIN........................... 35
Reset your BT1000
................................36
BT Services
Pre-stored numbers in the
BT Services menu
...................................37
Call the BT1000 Helpline
........................ 37
Call BT 118 500 (Directory Enquiries)
...... 37
Call Divert on
......................................... 38
Call Divert off/check
..............................38
Call Waiting on/off/check
....................... 38
Store a new service number
.................... 39
Dial a service number
............................. 39
Delete a service number or all
service numbers
.................................... 39
Using additional handsets
Register an additional handset
................ 40
Make an internal call between handsets
.. 41
Transfer a call
.........................................42
Make a conference call
........................... 43
Help
44
General information
Safety information
................................. 48
Cleaning
................................................49
Environmental
.......................................49
Product disposal instructions
.................. 49
Guarantee
............................................. 50
How many telephones can you have?
...... 51
Connecting to a switchboard
.................. 51
R&TTE
................................................... 51
Declaration of conformance
................... 51
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
10 Getting to know your phone
Handset buttons
Home screen
Left option button
Press to enter the main menu, access sub menus and confirm
options shown on the display above the button.
Redial/Vol/Up
From the home screen, press to enter the redial list, see page 18.
In talk mode, press to increase the earpiece volume.
In menu mode, press to scroll up through the options.
Contacts
Press to access your stored Contacts.
Talk
From the home screen, press to make and receive calls, see page 16.
Calls/Down
From the home screen, press to enter the Calls list, see page 25.
In talk mode, press to decrease the earpiece volume.
In menu mode, press to scroll down through the options.
1 (Speed dial)
From the home screen, press and hold to dial BT 1571
or your network’s voicemail service.
AB
C
GH
I
JK
TU
V
MN
O
DE
PQ
RS
WX
YZ
V
ol.
Calls
R
Menu
Intercom
Handset 1
3.22pm 03/11
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Getting to know your phone 11
AB
C
GH
I
JK
TU
V
MN
O
DE
PQ
RS
WX
YZ
Vol.
Calls
R
Menu
Intercom
Handset 1
3.22pm 03/11
Right option button
Press to confirm the option displayed on the screen above
the button, to delete or go back to the previous screen.
R (Recall)
R (Recall) for use with some BT Calling Features and
when connected to a switchboard/PBX.
End call/on or off
Press to end a call.
From the home screen, press and hold to switch the handset on or off, see page 16.
In menu mode, press to return to standby.
2-9 buttons (Speed dial)
From the home screen, press and hold buttons 2-9 to dial a
stored speed dial number, see page 24.
Press and hold to lock or unlock the keypad.
When entering characters press to toggle between upper and lower case.
Press and hold to turn the ringer on or off.
Getting to know your phone
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
12
Handset display and icons
Battery
Battery full
Battery 3/4 full
Battery 1/2 full
Battery 1/4 full
Low battery, needs charging
Handset
Steady – handset in use
Flashing – incoming call
Off – answer machine is off
Alarm
On – alarm set
Flashing – alarm time reached
Keypad lock
On – keypad lock on
Ringer
Handset ringer turned off
Antenna
On – handset is in range
of the base
Flashing – edge of range
Off – handset is out of
range of the base
Left/right
Characters off the display
to the left/right
Press key to scroll
through the number
Up/down
Menu options exist above/
below those shown on
the display
Calls list
Shown to indicate missed
calls in the calls list
(Right soft key)
Press to clear a character
when in entry mode
or to stop the alarm
(Right soft key)
Press to go back to the
previous menu level
or cancel the current action
Mute/Unmute (Right soft key)
During a call, press to mute/
unmute the call
(Right soft key)
From the home screen, press
to make an internal call or
access the intercom list
(Left soft key)
Press to confirm options
(Left soft key)
Press to select menu options
Press to see more details
about the call
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Getting to know your phone 13
Base
Green In use light
On when the base is
connected to the power.
Flashes when the phone
rings, during a call and
during registration.
Red charging light
On when the handset is in
the base charging.
Find
Press to page/locate a handset
also used for registering new
handsets to the base.
Getting to know your phone
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
14
Finding your way around your phone
Your BT1000 has an easy to use menu system.
Each menu has a list of options, which you can see on the menu map on the next page.
When the handset is switched on and at the home screen:
1. Select the
Menu
option by pressing the Left option button to open the main menu.
2. Use the or button to scroll through the available options.
3. When the menu you want is displayed, select by pressing the Left option
button or the
Back
option by pressing the Right option button to return to the
previous screen.
To exit a menu and return to the home screen, press
.
If no buttons are pressed for 30 seconds, the handset returns to the home
screen automatically.
AB
C
GH
I
JK
TU
V
MN
O
DE
PQ
RS
WX
YZ
Vol.
Calls
R
Menu
Intercom
Handset 1
3.22pm 03/11
Left option button
Press to select the
option displayed on the
screen above the button.
Right option button
Press to select the option
displayed on the screen above
the button.
Navigation buttons
Scroll up or down through
the menu options.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
15Menu map
Call list* Details
Store number
Delete
Delete all
Contacts* Add
View
Edit
Delete
Delete all
Capacity
BS settings Base ringer
Ring volume
Delete handset
Change PIN
HS settings Date and time
Alarm
Ringer
Tones
Handset name
Auto answer
Select base
BT services Helpdesk
BT 118500
Divert on
Divert off
Divert check
Call wait on
Call wait off
Call wait check
Empty
Empty
Registration Enter PIN
Reset Enter PIN
* You will need to press the Left soft key to open the sub menu.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
16
Call timer
Your handset will automatically
time your outgoing and
incoming calls. The handset
shows the length of time both
during and for a few seconds
after your call.
When you make a call, the
green
In use light on the
base comes on.
Out of range warning
The
icon on the display
indicates when you are in range
of the base. When the handset
is out of range of the base, the
icon flashes and the display
shows
Searching
. You need to
move back within range of the
base station.
If you move out of range when
you’re on a call, you’ll lose your
connection. The handset will
automatically re-connect to
the base when you move back
within range.
Switch the handset on or off
1. Press and hold until the handset switches On/Off.
Make an external call
1. Press .
2. When you hear the dial tone, enter the number.
Preparatory dialling
1. Enter the number first. If you make a mistake
select
Del.
by pressing the Right option button to
delete the last digit.
2. Press
to dial.
End a call
1. Press .
Receive a call
When you receive a call the phone rings, the
icon will flash and Incoming call will be displayed.
The In use light on the base will also flash. If you’ve
subscribed to a caller display service, the display
shows the caller’s number if it’s available and also
the caller’s name if it matches an entry stored in
your contacts list.
1. Press to accept the call.
Using the phone
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Using the phone 17
Call Waiting – instructions
If you’ve got a call waiting service and it is switched
on, your phone will alert you to a second incoming
call if you’re already engaged on an external call.
To switch your call waiting service on or off,
see page 38.
1. You’ll hear the call waiting tone and if you also
have caller display the display will show the number
of the caller and the name if it matches an entry in
your contacts.
2. Press or select
Switch
by pressing the Left
option button to answer the new call and your first
caller is put on hold.
3. Press or select
Switch
to toggle between the
two callers.
4. Press to hang up the current call.
5. If you hang up a current call, your phone will ring
back to reconnect you to your original call if that
caller is still connected.
Incoming speech volume
During a call, you can adjust the handset incoming
speech volume. There are five levels. The default
setting is Level 3.
Auto answer
If auto answer is set to On you
can answer a call by lifting the
handset off the base.
If auto answer is set to Off,
you’ll need to lift the handset
off the base and press
too.
If you wish to turn the handset
ringer off when the phone is
ringing, select by pressing
the right option button. The
display will show
Ringer
mute
.
Using the phone
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
18
Numbers in the redial list are
arranged in date/time order
with the most recent at the top
of the list.
If a redial number is stored
in your Contacts, the name
will be displayed instead of
the number.
The
icon is displayed when
the number is too long to be
shown fully. Press to scroll
through the rest of the number.
1. During a call, press
Vol.
or
Calls
to increase or decrease
the volume. The first press will present the call
volume screen so you can see the current volume
level. Subsequent presses will change the volume,
you will hear the volume level with each press.
Mute
During a call, you can talk to someone nearby
without your caller hearing.
1. During a call, select by pressing the Right
option button. The display shows
Mute
and your
caller can’t hear you.
2. Select to return to your caller.
Redial
Telephone numbers that you have called are
saved in the Redial list. The Redial list holds up to
20 numbers.
View or dial a number in the redial list
1. Press
Vol.
to open the redial list.
2. Press
Vol.
or
Calls
to scroll through the list.
3. To dial a number, when it is highlighted, press .
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Using the phone 19
For help entering a name , see
page 21.
When you press
to confirm
a selection, you will hear a
confirmation tone.
Copy a redial number to your contacts
1. Press
Vol.
to open the redial list.
2. Press
Vol.
or
Calls
to scroll through to the number
you want and select Menu by pressing the Left
option button.
3.
Store
number
is displayed, select .
4.
Name
is displayed. Enter a name and select .
5. The number is displayed, select to confirm.
Delete a number in the redial list
1. Press
Vol.
to open the redial list.
2. Press
Vol.
or
Calls
to scroll through to the number you
want to delete and select Menu.
3. Press
Calls
to display
Delete
and select .
4.
Delete?
is displayed, select to confirm deletion.
Delete the entire redial list
1. Press
Vol.
to open the redial list.
2. With any number in the redial list displayed,
select
Menu
.
3. Press
Calls
to display
Delete
All
and select .
4.
Delete
all?
is displayed, select to confirm
deletion of the entire list,
List
empty
is shown.
Using the phone
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
20
With the keypad locked, you
can still call the emergency
services on 999 and 112 and
you can still answer incoming
calls and operate the in call
features as normal. When the
call is ended, the comes
on again.
If you get an incoming call
while you’re paging a handset,
the incoming call takes priority.
If the handset ringer is switched
off on a handset, it will be
temporarily switched back on so
the handset can be found.
Paging calls can’t be answered
by a handset.
Voicemail (BT 1571)
1. If you have subscribed to BT Answer 1571 you can
press and hold to listen to your messages.
Keypad lock
You can lock the keypad so that it can’t be used
accidentally while you’re carrying it around.
To lock the keypad
1. Press and hold until the is displayed.
2. To unlock, press and hold again.
Turn the handset ringer on or off
1. Press and hold to turn the handset ringer on or
off. The icon will be displayed when the ringer is off.
Find handset (Paging)
You can ring a handset to help find it.
1. Press on the base. All handsets registered to
the base will ring and display
Paging
.
2. To stop the ringing, press on the base again or
press any button on any handset. This will stop all
handsets ringing.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
21Contacts
If you try and store a contact
when the contact list is full
you will hear an error tone
and
Contact
list
full will be
displayed. You will need to
delete an entry before another
can be stored.
Entering names
Use the keypad letters to enter
names, e.g. to store Tom: Press
TU
V
once to enter T. Press
MN
O
three times to enter o. Press
MN
O
once to enter m.
Writing tips
To delete the last digit/
character entered, select
Del
by pressing the Right option
button.
If the next letter is on the same
button that you have just
pressed, wait until the cursor
moves to the right before trying
to enter it.
Press
to switch between
text entry modes: sentence case
(Abc), upper case ABC), lower
case (abc) or numeric (123).
Press
to insert a space.
You can store up to 50 names and numbers in your
list of contacts. Names can be up to 14 characters
and numbers up to 24 digits.
Store a contact name and number
1. From the home screen, press . The first entry or
List
empty
will be displayed.
2. Select Menu by pressing the Left option button.
Add
is displayed, select .
3.
Name
is displayed. Enter the name (see note
opposite for help) and select
.
4.
Number
is displayed. Enter the phone number and
select
to save. You will hear the confirmation tone.
Character map
1 & . , ‘ ? ! @ 1
2 a b c 2 à á â ã æ ç
3 d e f 3 è é ê ë ë
4 g h i 4 î ï ì í
5 j k l 5 £
6 m n o 6 ö ô ò ó õ ø ñ
7 p q r s 7 $ ß
8 t u v 8 ü ù ú û
9 w x y z 9
0 space 0 + £ $ # *
* *
# Changes text entry mode (upper, lower, sentence case)
Contacts
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
22
To enter a pause in a
contact number
When storing a number, press
and hold in the place
where you want the pause.
To enter a recall in a
contact number
When storing a number, press
and hold
in the place
where you want the recall.
Searching alphabetically
Press the relevant keypad
button, e.g. to search for a
contact beginning with S, press
PQ
RS
four times, then scroll
Calls
through the entries.
For help entering names see
notes on page 21.
View/dial a contact
1. From the home screen, press . The first entry
will be displayed.
2. Press
Calls
or
Vol.
Calls
to scroll through and view the
entries.
3. To dial an entry, press when the entry
is displayed.
4. To view the number for an entry, select when the
entry is displayed.
Edit a contact entry
1. From the home screen, press . The first entry
will be displayed.
2. Press
Calls
or
Vol.
to scroll to the entry you want to edit
and select .
3. Press
Calls
to display
Edit
and select .
4. Edit the name by selecting to delete
characters and use the keypad to enter new ones,
then select
.
5. Edit the number using to delete characters
and use the keypad to enter new ones, then select
to save.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Contacts 23
When you delete all contacts
they will only be deleted on the
handset you are using. If you
have more than one handset
registered to the base and wish
to delete all contacts from them
all you will need to manually
follow the “Delete all contacts”
procedure using each handset.
Delete a contact entry
1. From the home screen, press . The first entry
will be displayed.
2. Press
Calls
or
Vol.
to scroll to the entry you want to
delete and select .
3. Press
Calls
until
Delete
is displayed and select .
4.
Delete?
is displayed, select to confirm.
Delete all contacts
1. From the home screen, press . The first entry
will be displayed, select .
2. Press
Calls
until
Delete
all is displayed and select .
3.
Delete
all?
is displayed, select to confirm.
View the contact memory status
1. From the home screen, press . The first entry
will be displayed, select .
2. Press
Calls
until
Capacity
is displayed and select .
3. The display will show the total number of contacts
stored and the total amount of contacts that can be
stored, e.g. 22/50 used.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
24 Speed dial
You can allocate a phone number to each of the
Speed dial buttons
to
WX
YZ
. Button is
pre-programmed with 1571 but you can replace
it with an entry of your choice. Once a Speed dial
entry has been stored you can simply press and
hold the Speed dial button to automatically dial the
number stored under it. To delete or edit a Speed
dial entry, simply follow the instructions to store a
new number and this will overwrite the old entry.
Save or edit a Speed dial entry
1. From the home screen, enter the phone number
you want to store.
2. Press and hold the Speed dial button
AB
C
to
WX
YZ
you want to store the number under. You will hear
a confirmation tone once the number has been
successfully stored.
3. To change any of the numbers that you have stored,
just repeat 1 and 2 above.
Dial a Speed dial entry
1. Press and hold the Speed dial button to
WX
YZ
under which the entry you want to dial is stored.
The number will be dialled automatically.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
25
You’ll need to subscribe to
your network provider’s Caller
Display service for this feature
to work. You might have to pay
a fee. For more information on
BT Calling Features, call BT free
on 0800 800 150.
To make sure the caller’s name
is displayed, make sure you’ve
stored the full telephone
number in your contacts list,
including the dialling code.
There are some incoming
calls where a number is not
displayed and a network
message is recorded instead:
Unavailable
= number
is unavailable
Withheld
= number has
been withheld
International
= international
number
Operator
= call from
the operator
Payphone
= call from a
payphone
Ringback
= a ringback call
Caller Display and the Calls list
Caller Display
If you’ve subscribed to a Caller Display service,
you’ll be able to see your caller’s number on your
handset display (provided it’s not withheld) before
you answer a call. If your caller’s name is stored
in your contacts list and it matches the number
calling, you’ll see the caller’s name and number on
the display. If you haven’t subscribed to a Caller
Display service
Incoming
call
will be displayed when
you receive a call.
Calls list
The Calls list holds up to 50 numbers. The date
and time of the call is also stored if available. Both
answered and unanswered calls are stored.
Calls are listed in chronological order with the most
recently received call at the top of the list. When
the list is full and a new call is received, the oldest
entry will be deleted automatically. The Calls list
can hold numbers up to 24 digits and names up to
14 characters.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
26 Caller Display and the Calls list
When the Calls list is open, press
Vol.
to scroll from the newest
call to the oldest, or press
Calls
to scroll from the oldest call to
the newest.
Missed call notification
When incoming calls have been missed the number
of new calls will be shown e.g.
3
new
calls
. The
notifications can be cleared by viewing all of the
handsets registered to the base. The
will still be
presented for missed calls in the calls list, so that
you can differentiate between calls in the calls list.
View/dial an entry in the Calls list
1. Press
Calls
button to display
Calls
list
.
2. The most recent entry is at the top of the list. (If
there are no entries
List
empty
will be displayed).
3. Press
Calls
or
Vol.
to scroll through and view the list.
4. When the entry you want is displayed, press .
View the call details
1. Press
Calls
button to display
Calls
list
.
2. Press
Calls
or
Vol.
to scroll through to the entry you
want and select Menu.
3.
Details
is displayed, select . Details of the date
and time of the call will be displayed.
4. Press to see more details about the call.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
27Caller Display and the Calls list
Save a Calls list entry to your contacts
1. Press
Calls
button to display
Calls
list
.
2. Press
Calls
or
Vol.
to scroll through to the entry you
want and select Menu.
3. Press
Calls
to display
Store
number
and select .
4.
Name
is displayed. Enter a name and select .
5. The number is displayed, select to confirm.
Delete an entry in the Calls list
1. Press
Calls
button to display
Calls
list
.
2. Press
Calls
or
Vol.
to scroll through to the entry you
want to delete and select Menu.
3. Press
Calls
to display
Delete
and select .
4.
Delete?
is displayed, select to confirm.
Delete the entire Calls list
1. Press
Calls
button to display
Calls
list
.
2. With any entry displayed, select Menu.
3. Press
Calls
to display
Delete
all
and select .
4.
Delete
all?
is displayed, select to confirm.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
28
The default time format is
24 hour.
Set the time format
1. Select Menu, scroll
Calls
to
HS
settings
and select .
2.
Date
and
time
is displayed, select .
3.
Time
format
is displayed, select .
4. Press
Vol.
or
Calls
to display either
12
hour
or
24
hour
and select to confirm. You will hear a
confirmation tone.
Set the time
1. Select Menu, scroll
Calls
to
HS
settings
and select .
2.
Date
and
time
is displayed, select .
3. Press
Calls
to display
Set
time
and select .
4. The current time set is displayed and the cursor will
blink at the first digit. Enter the time in 24 hour
format, 2 digits for the hour and 2 for the minute
(e.g. for 10.54pm, press
AB
C
,
AB
C
,
JK
,
GH
I
) then
select . You will hear a confirmation tone.
Handset settings
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Handset settings 29
If you turn the snooze function
on, when the alarm sounds and
you press any button to stop
it, the alarm will turn off for 10
minutes and then sound again
after 10 minutes.
Set the date
1. Select Menu, scroll
Calls
to
HS
settings
and select .
2.
Date
and
time
is displayed, select .
3. Press
Calls
to display
Set
date
and select .
4. The current date set is displayed and the cursor
will blink at the first digit. Enter the date in
dd-mm-yy format, 2 digits for the day, 2 for the
month and 2 for the year (e.g. for 5th January
2013, press (
,
JK
, , , ,
DE
) then
select . You will hear a confirmation tone.
Set an alarm or turn on or off
If you didn’t set the time and date when you first
set-up your phone then you will need to do so
before you can set an alarm, see page 44-45.
1. Select Menu, scroll
Calls
to
HS
settings
and select .
2. Press
Calls
to display
Alarm
and select .
3.
Vol.
or
Calls
to display either
On
or
Off
and select .
4. If you select
On
, enter the time in 24 hour format (e.g.
for 7.30am press (
,
PQ
RS
,
DE
, ) and select .
5. You now have the option to turn the Snooze
function on or off, press
Vol.
or
Calls
to display
On
or
Off
and select . The will be displayed on the
idle screen to indicate that the alarm has been set.
Handset settings
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
30
Stopping the alarm when it goes off
When the alarm goes off, it will sound at the
handset volume level set. If the handset ringer has
been set to Off, the alarm will still sound at level 3.
The
icon and
Alarm
On
will flash on the display.
To stop the alarm, press any button on the handset
(even if the keypad lock has been turned on).
If snooze has been turned on and you press any
button to stop the alarm, snooze will be activated
for 10 minutes, it will sound again at the end of the
snooze period.
To stop the alarm and the snooze function, press
and hold
.
If an alarm goes off during a call, the icon and
Alarm
On
will flash on the display and you will hear
a beep in the earpiece. The alarm will not sound
during ringing or paging.
The alarm is set for a single event only, so once the
alarm has been stopped the alarm time will need to
be set again if required.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Handset settings 31
Choose from 5 handset
ringtones. The default external
ringtone is Melody 1 and the
internal ringtone is Melody 2.
There are 5 handset ringer
volume levels plus Volume Off.
The default setting is volume
level 5.
If you turn the ringer off, the
icon will be displayed on the
standby screen.
As a quick way to turn the
handset ringer off, press and
hold
.
Set the handset ringtone for external or
internal calls
1. Select Menu, scroll
Calls
to
HS
settings
and select .
2. Press
Calls
to display
Ringer
and select .
3. Press
Vol.
or
Calls
to display either
External
ring
or
Internal
ring
and select . The current ringtone
will be played.
4. Press
Vol.
or
Calls
to hear the different ringtones
and select to save your choice. You will hear a
confirmation tone.
Set the handset ringer volume
1. Select Menu, scroll
Calls
to
HS
settings
and select .
2. Press
Calls
to display
Ringer
and select .
3. Press
Vol.
or
Calls
to display
Ringer
volume
and
select
. The current ringtone will be played at the
current volume setting.
4. Press
Vol.
or
Calls
to display and hear the different
volume levels or Off and select to save your
choice. You will hear a confirmation tone.
Handset settings
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
32
There are three handset tones:
Key beeps, Battery low and Out
of range. You can turn these on
or off, the default setting is On.
Key beeps: when turned on,
you will hear a beep after each
button press.
Battery low: when turned on,
you will hear a tone when the
battery is low.
Out of range: when turned on,
you will hear a tone when the
handset is out of range with
the base.
A handset name can be a
maximum of 12 characters. If
you name your handset, the
handset number will still be
displayed on the idle screen.
Turn the handset tones on or off
1. Select Menu, scroll
Calls
to
HS
settings
and select .
2. Press
Calls
to display
To n e s
and select .
3. Press
Vol.
or
Calls
to display
Ringer
volume
and
select
.
4. Press
Vol.
or
Vol.
Calls
to select the tone you want:
Key
beeps
,
Battery
low
or
Out
of
range
and select .
5. Press
Vol.
or
Vol.
Calls
to display either
On
or
Off
and select
to confirm. You will hear a confirmation tone.
Change the handset name
1. Select Menu, scroll
Calls
to
HS
settings
and select .
2. Press
Calls
to display
Handset
name
and select .
3. The current handset name is displayed. Select
to delete characters and use the keypad to enter
the new name, then select
. You will hear a
confirmation tone.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Handset settings 33
If auto answer is set to On you
can answer a call by lifting the
handset off the base. If it’s set
to Off, you’ll need to lift the
handset off the base and then
press .
The default setting is Auto
answer On.
Turn auto answer on or off
1. Select Menu, scroll
Calls
to
HS
settings
and select .
2. Press
Calls
to display
Auto
answer
and select .
3. Press
Vol.
or
Calls
to display either
On
or
Off
and select
to confirm. You will hear a confirmation tone.
Select a base
1. Select Menu, scroll
Calls
to
HS
settings
and select .
2. Press
Calls
to display
Select
base
and select . The
current base in use will have a
*
next to it.
3. Press
Vol.
or
Calls
to display the base you want and
select to confirm.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
34
Choose from 5 base ringtones.
The default base ringtone is
Melody 1.
Base settings
Set the base ringtone
1. Select Menu, scroll
Calls
to
BS
settings
and select .
2.
Base
ringer
is displayed, select . The current
ringtone will be played.
3. Press
Vol.
or
Calls
to hear the different ringtones
and select to save your choice. You will hear a
confirmation tone.
Set the base ringer volume
1. Select Menu, scroll
Calls
to
BS
settings
and select .
2. Press
Calls
to display
Ring
volume
and select .
The current ringtone will be played at the current
volume setting.
3. Press
Vol.
or
Calls
to display and hear the different
volume levels or Off and select to save your
choice. You will hear a confirmation tone.
There are 5 base ringer
volume levels plus Volume Off.
The default setting is volume
level 5.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Base settings 35
The default 4 digit system PIN
is 0000.
You cannot delete the handset
you are using to carry out this
action.
Once a handset is deleted it
will be removed from the list
of registered handsets and the
icon will disappear from the
display and
Register
will
be shown.
The default 4 digit system PIN
is 0000.
If you enter a digit incorrectly,
select
to delete it.
Delete a handset
Deleting a handset will de-register it from the
BT1000 base station. For more information on
using additional handsets and to register a handset,
see page 40.
1. Select Menu, scroll
Calls
to
BS
settings
and select .
2. Press
Calls
to display
Delete
handset
and select .
3.
Enter
PIN?
is displayed. Enter the 4 digit system
PIN and select
.
4. All handsets registered to the base will be displayed.
Press
Vol.
or
Calls
to select the handset you want to
delete and select .
Change the system PIN
1. Select Menu, scroll
Calls
to
BS
settings
and select .
2. Press
Calls
to display
Change
PIN
and select .
3.
Old
PIN?
is displayed. Enter the existing 4 digit PIN
and select
.
4.
New
PIN?
is displayed. Enter a new 4 digit PIN and
select
.
5.
Confirm?
is displayed. Enter the new PIN again and
select
. You will hear a confirmation tone.
Base settings
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
36
The default 4 digit system PIN
is 0000.
If you enter a digit incorrectly,
select Del to delete it.
Reset your BT1000
You can reset your BT1000 back to the factory
default settings. All settings will be reset but it will
not delete your stored contact entries.
1. Select Menu, scroll
Vol.
or
Calls
to
Reset
and select .
2.
Enter
PIN
is displayed. Enter the 4 digit system PIN
and select
.
3.
Reset
settings?
is displayed, select to confirm.
The display will return to the idle screen and your
BT1000’s default settings will be restored.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
37
You can easily call a range of useful pre-stored
numbers and BT Calling Features using the BT
Services menu. There are two empty entries in the
menu where you can store your own numbers if you
wish to.
Pre-stored numbers in the BT Services menu
Helpdesk
B
T 118500
Divert on
Divert off
Divert check
Call wait on
Call wait off
Call wait chk
Empty
Empty
Call the BT 1500 Helpline
1. Select Menu, scroll
Calls
to
BT
services
and select .
2.
Helpdesk
is displayed, press to call the BT1000
Helpline.
Call BT 118500 (Directory Enquiries)
1. Select Menu, scroll
Calls
to
BT
services
and select .
2. Press
Calls
to display
BT
118500
and press to call.
You need to subscribe to the
specific BT Calling Feature to
be able to use some of these
services. You might have to pay
a fee.
For more details on BT’s
Calling Features, go to bt.com/
callingfeatures, refer to the
user guide supplied when you
subscribed to the services of
your choice or call BT free on
0800 800 150.
If you’re not connected to the
BT network, some of these
features may not be available.
Call diversion services might
allow other divert options.
Please contact your telephone
network provider for details.
BT Services
BT Services
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
38
Call Diversion will divert
incoming calls to another
number of your choice.
If you always divert your calls
to the same number, you can
change the service number
for convenience. Follow steps
1 and 2 opposite and select
. Scroll to
Edit
, select
twice and after the existing
number enter the number you
usually divert to followed by #
(do not delete any of the digits
that are already there). Select
to confirm. Then, when you
call ‘Divert on’, your divert will
be set up without having to
enter any additional digits.
Call Waiting lets you know if
another person is trying to call
you while you’re on another
call. If a second caller rings, you
will hear a beep in the handset
earpiece. If you’ve subscribed
to Caller Display, the display will
show the caller’s details as well.
Call Divert on
1. Select Menu, scroll
Calls
to
BT
services
and select .
2. Press
Calls
to display
Divert
on
and press to call
the service and then enter the number you want to
divert calls to.
Call Divert off/check
1. Select Menu, scroll
Calls
to
BT
services
and select .
2. Press
Calls
to display either
Divert
off
or
Divert
check
and press
to call the service. Follow the spoken
instructions or listen for confirmation/status of your
instructions.
Call Waiting on/off/check
1. Select Menu, scroll
Calls
to
BT
services
and select .
2. Press
Calls
to display either
Call
wait
on
,
Call
wait
off
or
Call
wait
chk
and press to call the
service. Follow the spoken instructions or listen for
confirmation/status of your instructions.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
BT Services 39
You can also scroll down to
display either
View
or
Edit
to
view and edit stored service
numbers.
Store a new service number
1. Select Menu, scroll
Calls
to
BT
services
and select .
2. Press
Calls
to display
Empty
and select .
3.
Add
is displayed, select .
4. Enter the name you want and select .
5. Enter the number you want and select .
The number is saved.
Dial a service number
1. Select Menu, scroll
Calls
to
BT
services
and select .
2. Scroll
Calls
to display the entry you want to dial and
press .
Delete a service number or all service numbers
1. Select Menu, scroll
Calls
to
BT
services
and select .
2. Scroll
Calls
to display the entry you want to delete
(or any entry if you want to delete all entries) and
select
.
3. Press
Calls
to display either
Delete
or
Delete
All
and
select
. If prompted, select again to confirm.
If you accidentally delete all the
service numbers you can restore
them by resetting the phone,
see page 36.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
40
If there are already five
handsets registered to the
base, the registration will fail.
You must de-register another
handset before you can register
the new one, see “Delete
a handset” on page 35
for instructions.
The default 4 digit system
PIN is 0000.
If you enter a digit incorrectly,
select
to delete it.
You have 2 minutes to complete
the registration process.
If registration isn’t successful
the first time, please try again
incase the base registration
period ran out of time.
You can register up to five GAP compliant handsets
to your BT1000 base to extend your phone system
without needing to install telephone extension
sockets for each new phone.
If you’ve bought a BT1000 multiple pack, all
additional handsets come pre-registered to the
base. However, if you purchase an additional
handset separately, you must register it to your
BT1000 base (as shown on Page 6) before it can
be used. If a handset becomes un-registered it will
need to be registered to the base again.
Register an additional handset
1. Select Menu, scroll
Vol.
or
Calls
to
Registration
and
select
.
2. Scroll
Vol.
or
Calls
to select the base you want and
select .
3.
Enter
PIN
is displayed. Enter the 4 digit system PIN
and select
. The handset will display
Please
wait
.
4. Press and hold the button on the base for
approximately 5 seconds until you hear a long beep
and the green In use light begins to flash.
5. Once registration is successful the handset will
display
Handset
x
(with x being the assigned next
available handset number).
Using additional handsets
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Using additional handsets 41
Make an internal call between handsets
If you have more than one handset registered
to the base, you can make internal calls between
two handsets.
1. From the home screen, select
Intercom
by pressing
the Right option button. If you only have one other
handset registered to the base, the other handset
will be called automatically. If you have more than
one handset registered all handset numbers will be
displayed. Enter the handset number you want to
call or to call all handsets, press
WX
YZ
.
2. The other handset(s) will ring and display your
handset number so they know who is calling.
When a handset answers hold your conversation
as normal.
3. Press
to end the call.
Registering another make of
handset to your BT1000 base
If you want to register another
make of handset (i.e. not a
BT1000 handset) to your
BT1000 base you will need
to follow the Registration
instructions that came with
the handset first and then
continue with the base part of
the registration procedure (as
shown in point 3 on page 40).
Please note that registering
other types of handset will only
provide limited compatibility
i.e. you may only be able to
make and receive calls on the
additional handset.
If two handsets are engaged on
an internal call and an external
incoming call is received,
beeps will be emitted in the
earpiece of both handsets and
the incoming call details will be
shown on the handset display.
The internal call has to be
ended before the external call
can be answered.
Using additional handsets
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
42
If you only have one other
handset registered to the base,
the other handset will be called
automatically.
If the other handset is
unavailable your handset will
display Handset not available
and you will be returned to the
external caller.
Transfer a call
You can transfer an external call to another handset
registered to the base.
1. During an external call, select Menu, by pressing
the Left option button then scroll
Calls
until
Intercom
is displayed and select
.
2. All handset numbers registered will be displayed.
Enter the handset number you want to transfer
the call to or press
WX
YZ
to call all handsets. The
other handset(s) will ring and display your handset
number. Your external caller will be put on hold and
hear music.
3. When the other handset answers, press to
transfer the call.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Using additional handsets 43
Make a conference call
Using your handset, you can hold a conference call
with an external caller and other internal handsets
registered to the base. Or, you can hold an internal
conference call between all the handsets registered
to the base.
1. During an external call, select Menu, by pressing
the Left option button then scroll down until
Intercom
is displayed and select .
2. All handset numbers registered will be displayed.
Enter the handset number you want to join the
conference call or press
WX
YZ
to call all handsets. The
other handset(s) will ring and display your handset
number. Your external caller will be put on hold and
hear music.
3. The other handset(s) should answer by pressing .
4. Press and hold for 2 seconds, the display
will show
Conferen ce
. Your external caller and
internal handset(s) will all be connected to the
conference call.
5. Any caller can leave the conference by pressing .
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
44 Help
Phone doesn’t work
• Have you activated the batteries correctly? See page 5.
• Check that the mains power is correctly connected.
No dial tone
• Is the telephone cord plugged into the base and phone wall socket?
• Check that the mains power is correctly connected.
• Only use the telephone cord supplied with this phone.
Can’t make or receive calls
• Check that the mains power is correctly connected.
• The batteries may need recharging.
• Has there been a power cut? If so, place the handset back on the base for ten
seconds and try again. If it still doesn’t work, disconnect the batteries and mains
power for ten minutes, then reconnect and try again.
Handset doesn’t ring
• The ringer volume may be switched off, see page 31.
• Check that the mains power is correctly connected.
• Make sure the handset is registered to the base, see page 40.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Help 45
No display
• The batteries may be flat, dead or incorrectly inserted.
• Recharge or replace the batteries.
icon flashes
• Make sure the handset is registered to the base, see page 40.
• Check that the mains power is correctly connected.
• Check that the handset is within range of the base.
• If the batteries are low, place the handset on the base/charger to recharge.
icon not scrolling
• Try cleaning the charging contacts, see page 49.
• Check that the mains power is correctly connected.
You hear the busy tone when you press
• Make sure the handset is in range of the base.
• Another handset registered to your BT1000 base may be on the line.
Help
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
46
No Caller Display number/name displayed
• Have you subscribed to a Caller Display service from your network provider?
See page 25.
• The caller may have withheld their number.
• An exact name/number match was not found in your contacts. Check that you’ve
stored the full STD dialling code.
Can’t register a handset to a base
• You can register up to five handsets to your BT1000 base and you can
register your BT1000 handset to up to four bases. Check that you’ve not
exceeded the limits.
• Check that you’ve entered the correct system PIN (default PIN 0000).
• Check that you’re at least one metre away from other electrical equipment to
avoid interference when registering.
Base unit does not ring, but the lights are on
• Have you connected the telephone line cord correctly?
• Is the base ringer set to off? See page 34.
• You may have a faulty line or socket. Try using another socket or line.
If you are a BT customer then please call 0800 800 151 or your network
provider if you still have problems.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Help 47
Buzzing noise on my phone or on other electrical equipment nearby
• Sometimes your BT1000 can interfere with other electrical equipment if it’s
placed too close. We recommend that you place your BT1000 at least one
metre away from electrical appliances or metal obstructions to avoid any risk of
interference.
Customer Helpline
If you’re still having problems, call us on 0800 218 2182* or go to
bt.com/producthelp
General sales enquiries
• BT Residential lines – call 150. BT Business lines – call 152.
• For non BT line customers, call 0800 800 150 (residential) or 0800 800 152
(business).
• Additional handsets are available from the Helpdesk on 0800 218 2182*.
Billing enquiries
Please see the phone number shown on your BT bill.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
48 General information
Important
You won’t be able to call 999 from this phone if there’s
a power cut, so make sure you’ve got another way to
call for help in an emergency.
This product is intended for connection to analogue
public switched telephone networks and private
switchboards in the United Kingdom.
Replacing the handset batteries
After a time, you might find that the handset batteries
run out of charge more quickly. This is a standard sign
of wear and the batteries will need replacing.
1. Open the battery compartment cover.
2. Lift the battery out and remove the batteries.
Replace with two new AAA Ni-MH 500mAh
rechargeable batteries.
3. Replace the battery compartment cover.
Battery
Manufacturer Model Rating
Corun NI-MHAAAJ500 500mAh
GPI VT50AAAHC 500mAh
Caution
Don’t immerse batteries in water, throw them into a fire
or dispose of them with ordinary domestic refuse.
BT accepts no responsibility for damage caused to your
BT1000 by using any other types of batteries.
There is a risk of explosion if incorrect batteries are fitted.
Safety information
• Only use the power supply suitable for the BT1000.
Using an unauthorised power supply will invalidate
your guarantee and may damage the phone. The item
code for the base mains power supply is 066773 . If
you’ve bought a multiple pack, the item code for the
charger mains power supply is 066773.
• Use only the approved rechargeable batteries supplied.
Spare rechargeable batteries are available from the
BT1000 Helpline on 0800 218 2182*.
• Don’t open the handset (except to replace the
handset batteries) or the base. This could expose you
to high voltages or other risks. Contact the Helpline
on 0800 218 2182* for all repairs.
• If the keypad is locked, it is still possible to make
calls, to 999 and 112 emergency numbers.
• Radio signal transmitted between the handset and
base may cause interference to hearing aids.
• It is recommended that advice from a qualified
expert be sought before using this product in
the vicinity of emergency/intensive care medical
equipment.
• It is recommended that if you have a pacemaker
fitted you check with a medical expert before using
this product.
• Your product may interfere with other electrical
equipment, e.g. TV and radio sets, clock/alarms and
computers if placed too close.
• It is recommended that you place your product
at least one metre away from such appliances to
minimise any risk of interference.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
General information 49
• Never dispose of batteries in a fire. There is a
serious risk of explosion and/or the release of
highly toxic chemicals.
Cleaning
• Clean the handset and base (or charger) with a
damp (not wet) cloth, or an anti-static wipe.
Never use household polish as this will damage the
product. Never use a dry cloth as this may cause a
static shock.
Environmental
• Do not expose to direct sunlight.
• The handset may become warm when the batteries
are being charged or during prolonged periods of
use. This is normal. However, we recommend that
to avoid damage you do not place the product on
antique/veneered wood.
• Do not stand your product on carpets or other
surfaces which generate fibres, or place it in locations
preventing the free flow of air over its surfaces.
• Do not submerge any part of your product in water
and do not use it in damp or humid conditions, such
as bathrooms.
• Do not expose your product to fire, explosive or
other hazardous conditions.
• There is a slight chance your phone could be
damaged by an electrical storm. We recommend
that you unplug the power and telephone line cord
during an electrical storm.
Product disposal instructions
The symbol shown here and on the product
means that the product is classed as Electrical
or Electronic Equipment and should not be
disposed with other household or commercial
waste at the end of its working life.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in place
to recycle products using best available recovery and
recycling techniques to minimize the impact on the
environment, treat any hazardous substances and
avoid the increasing landfill.
Product disposal instructions for residential users
When you have no further use for this phone,
please remove any batteries and dispose of them
and the product as per your local authority’s
recycling processes. For more information please
contact your local authority or the retailer where
the product was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and check
the terms and conditions of the purchase contract
and ensure that this product is not mixed with other
commercial waste for disposal.
General information
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
50
Guarantee
Your BT1000 is guaranteed for 12 months from the
date of purchase.
Subject to the terms listed below, the guarantee
will provide for the repair of, or at BT’s or its agent’s
discretion, the option to replace the BT1000 or any
component thereof, (other than batteries), which is
identified as faulty or below standard, or as a result of
inferior workmanship or materials. Products over 28
days old from the date of purchase may be replaced
with a refurbished or repaired product.
Guarantee conditions
• The guarantee shall only apply to defects that occur
within the 12 month guarantee period.
• Proof of purchase is provided.
• The equipment is returned to BT or its agent as
instructed.
• This guarantee doesn’t cover any faults or defects
caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any
attempt at adjustment or repair other than through
approved agents.
• This guarantee does not affect your statutory rights.
Within the 12 month guarantee period
Prior to returning your product, please read the Help
section beginning on page 44 or contact the BT1000
Helpline on 0800 218 2182*. Additional answers to
frequently asked questions are available from
bt.com/producthelp
In the unlikely event of a defect occurring, the helpdesk
will issue a Fault Reference Authorisation (FRA) number
and instructions for replacement or repair. Please note
you will need the FRA number before returning the
product. This does not affect your statutory rights.
Outside of the 12 month guarantee period
If your product needs repair after the guarantee
period has ended, the repair must meet the approval
requirements for connection to the telephone network.
We recommend that you contact BT’s recommended
repair agent Discount Communications on 0800 980
8999 or a local qualified repairer.
Returning your phone
If the Helpline is unable to remedy your problem they
will issue a Fault Reference Authorisation number and
ask you to return the product to your original place
of purchase. Where possible, pack the product in its
original packaging. Please remember to include all
parts, including the line cords, power supply units and
the original batteries.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
General information 51
Technical information
How many telephones can I have?
All items of telephone equipment have a Ringer
Equivalence Number (REN), which is used to calculate
the number of items which may be connected to any
one telephone line. Your BT1000 has a REN of 1. A total
REN of 4 is allowed. If the total REN of 4 is exceeded,
the telephones may not ring. With different telephone
types there is no guarantee of ringing, even when the
REN is less than 4.
Any additional handsets and chargers that you register
have a REN of 0.
Connecting to a switchboard
Switchboard compatibility
This telephone may be connected to most types of
switchboard, however in the event of any difficulties,
consult your switchboard Service Provider.
Recall (R)
Recall is used when connected to certain switchboards/
PBXs and some BT Calling Features, or those services
available via your network provider. The BT1000
supports time break recall but not earth loop recall.
R&TTE
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
(1999/5/EC).
Declaration of Conformance
Hereby, BT declares that this BT1000 is in compliance
with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
If you would like a copy of the Declaration of
Conformance, please visit bt.com/producthelp
For your records
Date of purchase:
Place of purchase:
For guarantee purposes, proof of purchase is required,
so please keep your receipt.
Enter your base system PIN here:
[ / / / ]
For a Better Future
We’re always looking to make our products last longer
and use less power, so we don’t have such a big impact
on the environment.
To find out about what we are doing, visit
bt.com/betterfuture
Offices worldwide
The services described in this publication are subject to availability
and may be modified from time to time. Services and equipment
are provided subject to British Telecommunications plc’s respective
standard conditions of contract. Nothing in this publication forms
any part of any contract.
© British Telecommunications plc 2012.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Printed in China.
Designed by The Art & Design Partnership
Available in other formats including braille, large print or audio CD.
If you would like a copy, please call 0800 218 2182*.
† UK’s No. 1 Phone Brand based on sales. Source GFK RT UK,
Landline Phone sales, Volume and Value Sales. Jan 2000-Aug 2012.
* Calls made from within the UK mainland network are free.
Mobile and international call costs may vary.
BT1000 (10/12) Issue 1
… 16 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw BT BT1000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van BT BT1000 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van BT BT1000

BT BT1000 Snelstart handleiding - English - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info