Operating Menus
Model DWB-740 User's Manual
18
ADDITIONAL FUNCTIONS
Push To Speak Operations:
Push to speak allows the user to speak through the receiver back to the camera.
Push to speak works from the receiver directly to one camera. Push to speak
is activated by pressing and holding the center button while speaking into the
receiver. The camera in screen view will be able to hear the speaker.
Note:
In SCAN mode: When the receiver is in scan mode, the push to speak action is
between the receiver and the camera that is shown on the receiver’s screen.
In Quad mode (where there is a split screen of the four cameras): Push to speak is
disabled.
Lullabies Operation
Lullabies can be set to play on 1 or more cameras. 3 different Lullabies songs are
available. Each song lasts for 7 minutes. Lullabies can be initiated at the
receiver or at the camera.
Initiating Lullabies from Receiver:
1. From the main display screen, select the camera to play the Lullabies. Press
the Up Arrow cursor to change camera selection 1,2,3,or 4.
2. Press the down arrow cursor button (near the music note icon.) Press again to
scroll through the lullaby options.
Imitating Lullabies from the Camera:
1. To turn a lullaby on at the camera, press the on/off button, located on the
bottom of the camera.
2. To change lullabies, press the on/off button again.
3. To turn off lullabies, press and hold the on/off bottom from 2 seconds.
NIGHT VISION
The camera has built-in infrared LEDs to allow you to view up to a distance of 16 ft at
night for 24-hour surveillance. The LEDs automatically activate at night and the picture
viewed turns from color to a black and white image.
