606730

BRK DVRAD0805 Handleiding

32
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
USER’S MANUAL
Model
DVRAD0405/DVRAD0805/DVRAD0810/DVRAD1610/DVRAD1620
Page 2
Thank you for choosing First Alert for your security needs!
For more than half a century, First Alert has made the home-safety and security products that make
your job easier. Our products are built to the highest standard which has earned us a leadership role
in the home-safety and security product categories. We are committed to serving our customers,
from the professionals who install our products, to the families and businesses who count on them.
First Alert has been helping families and businesses stay safe for over 50 years. By having a First
Alert Security System, you’re taking the first step in protecting your home or business from damage
or theft. We’re watching, even when you’re not.
This manual is written for the SmartBridge™ DVRAD0405/DVRAD0805/DVRAD0810/DVRAD1610/
DVRAD1620 DVRs. It was accurate at the time it was completed. However, because of our ongoing effort
to constantly improve our products, additional features and functions may have been added since that
time and on-screen displays may change. We encourage you to visit our website at www.firstalert.com or
www.brkelectronics.com to check for the latest manuals (English and Spanish), firmware updates, downloads,
other security camera products and announcements. You’ll find this product line under Home Security >>
Security Cameras >>Wired Cameras.
INTRODUCTION
THANK YOU
© 2013 BRK Brands, Inc. All rights reserved. Distributed by BRK Brands, Inc., Aurora, Illinois 60504. BRK Brands, Inc. is a subsidiary of Jarden
Corporation (NYSE: JAH). First Alert® and SmartBridge™ are registered trademarks of the First Alert Trust. Due to continuing product develop-
ment, the product inside the packaging may look slightly different than the one on the package. To obtain warranty service, contact the Consumer
Affairs Division at 1-800-323-9005, Monday through Friday, 7:30 a.m. - 5 p.m., Central Standard Time.
Made in China
Welcome
Page 3
INTRODUCTION
KEY PRODUCT FEATURES
Four, eight or sixteen channel H.264 digital video recorder with Internet
remote surveillance, motion detection, PTZ and alarm control suitable
for applications such as high-end residential - new or remodel, light
commercial, small business/retail, small warehouse or small grocery
• Auto IP connection capability
• H.264 Compression & Virus free Linux O/S
• Record, playback, mobile phone live view, backup, control, & remote access
• 500 GB, 1 TB or 2TB SATA hard drive installed depending on model
• Supports smart phone live view
• User-friendly interface: DVR capable of providing 16 bit true color,
semi-transparent GUI with notes for selected menu items.
• Advanced motion detection activated recording
• 24/7 Scheduled Recording
• Network monitoring through internet access
• Supports USB or external DVD backup
• Hi-speed backup/upgrade/record via USB2.0
• PTZ camera control
• HDMI Video Out
Main Description
Product Features
Page 4
INTRODUCTION
TABLE OF CONTENTS
Section DeScription page #
1
Introduction 2-5
2
Safety 6
3
Product Overview 7
What is in the Box 7
DVR Controls 8-9
Front Panel 8
Back Panel 9
Remote Control 10
Mouse and Virtual Keypad 11
Camera Power Connections 12
Connecting Devices 12
4
Initial Setup - System Operation 13
System Start Up 13
Power On/Off 13
Setup Wizard Setup Wizard 14
System Setup Menu 16-29
General 16
Channel 18-19
Network 20-21
Alarm 22-25
System 26-27
Device 28-29
5
Basic Operation 30
View Layout 30
Video Adjust 31
PTZ (PAN TILT ZOOM) Camera 32
Clients 33
Snapshot 34
Record Setup 35-37
Playback 38
Clear Alarm 39
Shutdown 39
Page 5
INTRODUCTION
TABLE OF CONTENTS
Section DeScription page #
6
Remote Access 40
Network Setup 40-42
External Recording 43
External Playback 44
Settings 45
Advanced Setting 46
Pan Tilt Zoom 47
Setting Up Groups 48
Remote Configuration 49
Camera Settings 50
8
Appendix 51
Hard Drive Removal and Installation 51
Specifications 52
FAQ’s (Frequently Asked Questions) 53
Troubleshooting 54
Warranty 55
Page 6
SAFETY
CAUTION STATEMENTS
Safety Precautions
Safety Precautions
• Do not drop, puncture, or disassemble
the cameras or DVR.
• Do not tug on the power adapter. Use the
plug to remove it from the wall.
• Do not expose the cameras or DVR to high temperatures.
• For your own safety, avoid using the DVR when
there is a storm or lightning in your area.
• Use the cameras and DVR with care. Avoid
pressing hard on the cameras or DVR body.
• Do not use power cable if it is damaged or crushed.
Instructions for Use
• Always purchase the correct size and grade of
battery most suitable for the intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of
the device prior to battery installation.
• Ensure the batteries are installed correctly
with regard to polarity (+ and -).
• Remove batteries from equipment that is not
to be used for an extended period of time.
• Remove used batteries promptly.
FCC Compliance Class B Digital Device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that of the receiver.
• Consult the dealer or an experienced radio or TV technician for help.
Notice: Only peripherals complying with FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or
peripherals not recommended by First Alert / BRK Brands, Inc. is likely to result in interference to radio and TV reception. Changes or modications
to the product, not expressly approved by First Alert / BRK Brands, Inc., could void the user’s authority to operate the equipment.
Important: The information shown in the FCC Declaration of Conformity paragraph below is a requirement of the FCC and is intended to supply you with information regarding the
FCC approval of this device. The phone number listed below is for FCC related questions only and not intended for questions regarding the connection or operation for this device.
FCC Declaration of Conformity for devices with the FCC logo. Responsible Party: First Alert / BRK Brands, Inc., 3901 Liberty Street Rd., Aurora, IL. 60504-
8122 Telephone: (630) 851 - 7330. Product / Model: DVRAD04, DVRAD08, and DVRAD16. We, First Alert / BRK Brands, Inc. declare under our sole responsibility
that the device to which this declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Certification (if applicable)
This device contains a radio transmitter. Accordingly, it has been certied as compliant with 47 CFR Part 15 of the FCC
Rules for intentional radiators. Products that contain a radio transmitter are labeled with an FCC ID.
FCC Compliance
These symbols indicate that it is prohibited
to dispose of these batteries in the
household waste. Take spent batteries that
can no longer be charged to the designated
collection points in your community.
Disposal
Fire and Electric Shock Hazard Statement
Caution!
When working with electrostatic sensitive de-
vices such as hard disk or DVR unit, make sure
you use a static-free workstation. Any electro-
static energy coming in contact with the hard
disk or DVR can damage it permanently.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. UNPLUG
ALL POWER SOURCES, INCLUDING CAMERAS FROM THE DVR
BEFORE REMOVING COVER. FAILURE TO DO SO CAN RESULT IN
DAMAGE TO THE DVR OR ITS COMPONENTS AS WELL AS INJURY
OR DEATH.
The lightning ash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of un-insulated “dangerous
voltage” within the product’s enclosure that may be of sufcient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle, is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS DVR UNIT TO RAIN OR MOISTURE
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF THE PLUG TO THE WIDE SLOT AND FULLY INSERT
CAUTION
RISK OF ELECTRIC SHOCK
Page 7
PRODUCT OVERVIEW
PACKAGE CONTENTS
What
,
s in the Box*
H.264 4,8 or 16 channel Digital DVR
with 500 GB, 1 TB or 2TB Hard Drive
DVRAD0405/DVRAD0805: 500 GB
DVRAD0810/DVRAD1610: 1TB
DVRAD1620: 2TB
USB 2.0 Mouse
WARNING
PROTECTED BY
THESE PREMISES ARE UNDER
24 HOUR VIDEO SURVEILLANCE
3 Window
Warning Decals
Installation
Software
Power Supply
for DVR
RJ45 Ethernet Cable
Quick Install Guide
Remote Control
DVR QUICK START GUIDE
POWER SPLITTER FOR
DVR AND CAMERAS
(9 way supplied with 8 Camera systems;
5 way supplied with 4 camera systems)
BNC VIDEO & DC POWER CABLE
(1 supplied with each camera)
REMOTE CONTROL &
USB 2.0 MOUSE
POWER SUPPLY
DVR & CAMERAS
RJ45 ETHERNET CABLE
Step 2: Connecting the Cameras / DVR
Connect the BNC & power from camera with BNC power cable using the side labeled
"Camera Side”
Using other side of BNC power cable connect BNC to BNC video input on DVR
Connect power cable to one of the multi power splitter ends
Plug (red) connector on power splitter to 12V DC input on DVR
Plug DVR power supply into wall outlet
Step 3: Connecting your Mouse and Ethernet Cable
Connect the USB mouse to the bottom USB slot on the back
Connect the Ethernet cable to the back of the DVR labeled either NET or RJ45
Connect the other end of the cable directly to your router, modem or high speed
internet connection input
Note: Please consult the networking section of your manual to configure the DVR for
remote viewing.
1
Back of DVR
3
ENGLISH
BACK of DVR
Step 1: Connect the DVR to your Monitor or TV
(Monitor Option)
Connect a VGA cord (not included) from your monitor to the VGA Output port on the back of your DVR.
(TV Option)
Connect the end of the BNC-RCA (BNC SIDE ONLY) cable to the back of the
DVR labeled “Video Output”
Connect the BNC-RCA (RCA SIDE ONLY) cable to an open video (yellow RCA) input on your TV/Monitor
(note the input name or number)
Turn on your TV and select the appropriate input (noted above)
1
1
2
3
1
2
3
4
Step 4: Downloading the SmartBridge Software
Insert install CD into CD Rom Drive Double click SmartBridge.exe or let
CDRom run automatically.
Install SmartBridge Software.
On your computer desktop, Double click installed Smartbridge Software Icon.
Select the Connect Tab. Enter Auto ID DVR Code (On DVR system, right click and
select “Net Status” to obtain Auto ID DVR Code). Password is default 123. Select
Login to start viewing your Smartbridge security system remotely.
2
1
3
4
5
1
2
3
VGA
1
1
2
2
Product Contents
Power
IR
Rec
MENU
1 2 3 4
1 2 3 4
ESC
DVR
CAMERA(S)
STICKERS
WARNING
PROTECTED BY
THESE PREMISES ARE UNDER
24 HOUR VIDEO SURVEILLANCE
3
2
3
4
5
1
(Attach for each camera)
(5 or 9-Way Power Splitter)
Go to firstalert.com and search for model # to find complete instruction manual of
your First Alert DVR.
© 2012 BRK Brands, Inc. All rights reserved. Distributed by BRK Brands, Inc., Aurora, Illinois
60504. BRK Brands, Inc. is a subsidiary of Jarden Corporation (NYSE: JAH). First Alert® is a
registered trademark of the First Alert Trust. Due to continuing product development, the product
inside the packaging may look slightly different than the one on the package. To obtain warranty
service, contact the Consumer Affairs Division at 1-800-323-9005, Monday through Friday, 7:30
a.m. - 5 p.m., Central Standard Time.
www.firstalert.com
iPhone, iPad, Android Compatible*
1
2
3
4
* iPhone and iPad are registered trademarks of Apple Inc. Android is a trademark of Google, Inc.
9-way splitter
or two splitters for 16
channel
60’ BNC Video &DC Power Cables
(One for each camera. Varies with kits depending
on number of cameras included.)
Page 8
PRODUCT OVERVIEW
DVR CONTROLS
Front Panel
item Function control DeScription
1 (1) IR remote receiver Direct remote towards this position when using DVR
2 Power indicator light A green light indicates power is on
3 Record indicator light A green flashing light indicates recording
Buttons 1-4(8)(16) Camera Selection
4 10+
Press for camera selection of channels 10-16 (on 16 channel DVR only)
5 Menu Enter menu setup
6 ESC
Brings system previous selection
7 Left
In menu mode: moves to highlight next section
8 Up
In live mode: rotates between single , quad, eight or nine camera screen
9 Down
In live mode: rotates between single , quad, eight or nine camera screen
10 Right In menu mode: moves to highlight previous section
11 OK
Press to make selection
12 Sleep
On 16 Channel DVR only
1
2 12 4
3 6
8 10
115
7
9
8 Channel DVR
16 Channel DVR
1
2 12
3
8 10
115
7
9
4 Channel DVR
1
2 12
3
8 10
115
7
9
Page 9
PRODUCT OVERVIEW
DVR CONTROLS
Back Panel
item Function DeScription
1
Alarm 4 alarm inputs; 1 alarm output
2
VGA Output For connecting to VGA monitor
3
HDMI Output For connecting to HDMI monitor
4
USB/Mouse Use Lower USB port for mouse connection; Use Upper USB port for USB flashdrive or backup
5
NET For connecting RJ45 ethernet cable to PC or router
6
RS485 For connecting PTZ cameras
7
Power Switch Power On/Off
8
Power Supply For connection to power cord +12V DC
9
Audio Input For connecting audio signal from audio capable cameras or self powered microphones (RCA jacks)
10
Video Input For connecting video signal from cameras (BNC)
11
BNC Output For connecting to a BNC monitor
12
RCA Audio Out For connecting to a speaker or amplifier
13
Ground Ground Connection
12
4 6 85
7
8
11
13
10
312
4 Channel DVR
8 Channel DVR
16 Channel DVR
1
2 4 6 85
7
8
11
13
10 3
12
1
4 6 85
7811
13
10 3
12 2
Page 10
Remote Control
Remote Control Operation
The remote control is the secondary input device for navigating the system’s interface.
In device operation, the MENU key has the same function as “left click” of the mouse.
Any button not identified is not used.
PRODUCT OVERVIEW
REMOTE CONTROL
Directions for Installing/
Changing Batteries
1. Open battery compartment on back of
Remote and insert (2) Alkaline AAA batteries
(provided.)
2. Ensure all batteries are installed correctly
with regard to polarity (+ and -.)
3. Remove batteries from Remote if it is not to
be used for an extended period of time.
4. Remove used batteries promptly and
replace all batteries of a set at the same
time.
5. Always purchase the correct size and grade
of battery most suitable for intended use.
item Function DeScription
1 Power Click power for about 3-5 seconds to shut down the DVR.
2
Numeric
Buttons
Press to Select channel to view; use to input numerical information in
appropriate screens
3
NAVIGATION BUTTONS
Press to make selection
Press to cursor up; in PTZ mode, press to pan camera up
Press to move cursor down; in PTZ mode, press to pan camera down
Press to move cursor left; in PTZ mode, press to pan camera left
Press to move cursor right; in PTZ mode, press to pan camera right
4
PLAYBACK CONTROLS
Playback Search Recordings
Play Play Recording (resumes after pause)
Pause Pause Playback in recording mode
Frame Playback by frame
Fast Forward Press to fast forward
Fast Backward Press to fast backward
Play Slowly Press to play video slowly
Stop Press to stop playback
Record Press to record video (allows to select any or all cameras)
5 Zoom – (For PTZ cameras only) Press to zoom out
6 Zoom + (For PTZ cameras only) Press to zoom in
7
Menu
Quick access menu
8
All
Scroll through different view modes
9
10+
Press for camera selection of channels 10-16
10
ESC
Exits Page/Command
11
DEV
(To use the remote for
more than one DVR)
Allows setting the remote default ID
8
10
7
9
5 6
2
1 11
3
4
Page 11
PRODUCT OVERVIEW
MOUSE AND VIRTUAL KEYPAD
Mouse Operation with this DVR
The mouse is the primary input device for navigating system menus.
NOTE: Unless otherwise noted, all system functions described
in this manual are achieved through mouse input.
To use a mouse with the system:
Connect a USB mouse to the USB MOUSE port on back panel of the system.
NOTE: Only the USB 2.0 port on the back panel (Upper USB port)
is designed for data backup to a USB flash drive. Do not connect a
USB flash drive to the USB MOUSE port. (Lower USB port)
Use the mouse buttons to perform the following:
1
Left-Button:
• Click to select a menu option
• During live viewing in split-screen double-click on a channel
to view the selected channel in full-screen
• Double-click the channel again to return to split-screen view
• Selecting letter or number on the virtual keypad
2
Right-Button:
• Click to open the Quick Access Menu
• Exits any window
• Exits any menu or re-opens previous menu
3
Scroll-Wheel:
• No function
Mouse Controls
REAR of DVR
Connect Mouse &
USB Drive
2
1
Mouse Button
Operation
3
Virtual Keypad
Virtual Keypad
To enter text or numerical data, the system uses a virtual keypad. In fields
where letters or numbers can be entered, you can switch between various
formats – numbers, upper case (ABC) and lower case (abc). Note you can
access all numbers when in the “Letters” virtual keypads. See below.
Numbers
Letters
Page 12
PRODUCT OVERVIEW
CAMERA AND POWER CONNECTIONS
Connecting Devices
Splitter -
4/8 camera
1 Power
Power to DVR
Power
from 120V
DC Converter - 12V
VGA to PC Monitor or TV
BNC to Security Camera Monitor
(Not included)
RJ45 Ethernet to
Router and Internet
PTZ & Alarm
Connections
(Cameras not
included)
Follow this diagram to make device connections. Note, some devices are not
included with this kit. See “What’s in the Box” for included devices.
RCA Audio Out to
Powered Speakers
(Not included)
Back Panel
Connect Mouse &
USB Drive
Smartphone
through Mobile
Internet Setup
(Smartphone Not
included)
Video to DVR
Channels 1-8
Video to Camera
Power to Camera
AV Cable: BNC/DC Power
(1 per Camera)
RCA Audio In from Audio
Cameras or Powered
Microphone
(Not included)
Splitter Cable
Installing Cameras
Installing Cable-Safe Mounting Bracket
Decide if the camera is to be wall or ceiling mounted and if cable will be fed
through mounting surface hidden directly behind the bracket or fed through
the side of the bracket so cable is exposed. Mark area where you will drill your
hole. The Cable-Safe Mounting Bracket has three Adjusting Points. 1) Rotates
Bracket 360° relative to mounting surface, 2) Adjusts bracket hinge 180° and 3)
Rotates camera body 360° to level image.
Step 1: Select the position for the camera and drill your hole for the cable. Feed
cable through mounting surface. Mount bracket to surface.
Step 2: Aim camera at target and using Adjusting Points 1 and 2 in tandem
position camera. Tighten Ring and Thumb Screw.
Step 3: Rotate camera body using Adjusting Point 3 to the proper view angle
making sure the Camera Shield is always on top and parallel to the ground so
the image is level in the Live View Screen. See “Camera Orientation” Info box.
Tighten screw.
Step 4: Attach proper length of cable and run from camera to DVR location.
Note: Power cable ends are different. Be sure the correct power connector end
matches “To Camera” or “To DVR”. Tip - Connect cable at camera end before
running cable to verify orientation is correct. Also, see Information box on
“Longer Cable Runs”.
Step 5: Check camera orientation via the Live View screen. Adjust as required.
Screw
Thumb Screw Ring
Slot for
exposed
cable
installation
To DVR To Camera
Verify Cable Orientation
2 1
3
Use First Alert Cameras Only
Use First Alert Power Supply Only
Page 13
Power On/Off
To power the system On/Off, connect the power cable to the DC 12V port on the rear panel. Press the toggle
switch to the on position in the back of the DVR. At startup, the system performs a basic system check
and runs an initial loading sequence. After a few moments, the system loads a live display view.
User Login
Password
ATTENTION: By default, passwords are disabled on the system. You
do not need to enter a password when accessing any system menus.
However, for security purposes, it is highly recommended to enable
passwords on the system using the Password Menu. See “Password”
section for details on setting up passwords. Right click and
select Login. No password is required when no password is
set up. Right click again to show the quick access menu
Quick Access Menu
When using the mouse, use the Quick Access Menu to
access several system options, including the System
Setup Menu. Select one of the following options:
• System Setup: Opens the main system menu
• View Layout: Provides a choice of viewing channels on the
monitor
• View 1: Allows viewing of 1 channel
• PIP: Allows viewing of 2 channels,
Picture in Picture
• View 4: Allows viewing of 4 channels
• View 8: Allows viewing of channels 1
through 8, with channel 1 in large view mode
• Split 9: Allows viewing of
channels in a 3 x 3 channel grid
• Split 16: Allows viewing of
channels in a 4 x 4 channel grid
• Video Adjust: Adjust video image settings by channel
• PTZ: Opens the PTZ control menu
• Clients: Network user status
• Snapshot: Allows you to take a photo of the
channel that the cursor is on, and save to HDD
• Photos: Review save Snapshots, and upload to USB drive
• Record Setup: Access to recording settings
for each channel, begin manual recording
• Playback: Open the Search Menu
and playback recorded video
• Clear Alarm: Cancel alarms
• Shutdown: Allows a choice of logging out,
powering down or restarting the DVR system
INITIAL SETUP
SYSTEM OPERATION
Main Viewing Screen
User Login Menu
Power Switch
NOTE: Powering down stops the system. The power LED is still on. The only way to fully power down
the system is by turning the power off & on with the power switch on the back of the DVR.
System Start Up
Powering your DVR and Cameras
The power supply included with the DVR is rated for 5 amps. Normally, this is enough to power both the
DVR and supplied cameras. However, using aftermarket cameras or a larger number of cameras may sur-
pass the capability of the power supply, causing the systerm to shut down. Most devices should be marked
with the Amperage rating, but some may be marked by wattage. In this case, Amp usage can be found by
dividing Watts by Volts, or A=W/V. The power supply should be upgraded if it surpasses 80% of its rating
(i.e., 4 amps for a 5 amp power supply), to compensate for momentary spikes in current draw. Note: One Amp equals 1000 milliamps
Page 14
INITIAL SETUP
SETUP WIZARD
Setup Wizard
Quick Startup
After the initial system power up,
the system will ask for a login. The
default user is “abc” and there is no
password. Simply click login, after
which the Setup Wizard will start.
Clicking on “Next” will bring you to
the next page. “Cancel” will exit the
Wizard.
• Device ID
Enter a number between
0 and 255 to identify the
DVR when used with
other DVRS
• Language
Choose from the
dropdown menu to set
your preferred language
• Date Format
Choose from the
dropdown menu to set
your preferred date
format
• Set Date
Set the year, month
and day here
• Set Time
Set the hour,
minute and second
here
• Timezone Setting
Set the timezone
according to Prime
Meridian time
• PPPoE
Click “Set” to setup the
DVR to comminucate
over DSL or 3G wireless
networks. You will need
the account info from your
Service Provider
• IP
The DVR’s IP address can
be manually set here
• NetMask
The IP Subnet Mask
can be manually set
here
• Gateway
Set the Gateway IP
address here
• DNS
Select the DNS
IP address for the
network here
• Device Port
Used to select an open
port on a network router
for the DVR to access
• Automatic (DHCP)
Click here to automatically
assign an IP address to
the DVR once connected
to a network
Continued on next page
Page 15
INITIAL SETUP
SETUP WIZARD
• Resolution (Main)
Choose between
“None(Camera Default)”,
“CIF(352x288)” or
“D1(720x480)” resolutions
• kbps (Main)
Choose transmission rate
for camera channel
NOTE: A higher kbps will
result in larger video files
• Resolution (Minor)
Choose between
“None(Main Setting
Default)”, “QCIF(176×144)”
or “CIF(352x288)”
resolutions over network
• kbps (Minor)
Choose transmission
rate for camera
channel over a
network connection
• Fluency (Minor)
Selects the frame rate that is
transmitted over the network.
A higher frame rate will
increase network data rate
• Number
ID number of the particular
drive device
• Capacity
Drive device’s storage
total capacity
• Used
Amount of currently
stored data on drive
device
• Status
Show status of
Hard Drive
• Format
Will format a selected
drive. NOTE: This will
erase all data on the
drive
• Refresh
Select to update
display of connected
disk drives
• Type
Displays the drive device
type, “HD” for Hard Drive,
“U-Drive” for USB Drive
Finishing the Wizard
After the Drive Device the screen, the Wizard will ask if the Wizard should be launched the next time the DVR boots up. After
clicking “Finish” the system will ask if you would like to run the “interactive demo.” Click “Ok” to run the demo.
Page 16
SYSTEM SETUP
GENERAL MENU
System Setup
General Menu
Path: System Setup>General
After the system powers up, and the user is logged
in, the Right Click Menu can be accessed. To access
basic System Settings, select the first option,
“System Setup.”
To open the System Setup Menu: Right-click
anywhere on-screen to open the Quick Access Menu
and select System Setup (mouse only), or press the
Menu and select System Setup on the remote control
or front panel of the system.
NOTE: If passwords are enabled on the system, enter
the username and password when prompted.
• Language
Select your preferred language
from the dropdown menu
• NTSC/PAL
Change the video the standard
between NTSC (North
America) and PAL (Europe and
rest of world)
NOTE: Changes take effect
after rebooting the DVR
• Camera
Select camera feed
• Transparency
Select sppearance of
onscreen menus
• Display Device ID
Toggle device ID
display in upper right
corner of monitor
• Display Wizard for Startup
Toggle to activate Quick Setup
Wizard when system boots up.
• Wizard
Click here to begin
Quick Setup Wizard
at any time
• Interactive Demo
Click to begin demo which
highlights system functions
and capabilities
• VGA Resolution
Select display resolution
Page 17
SYSTEM SETUP
GENERAL MENU
• Date Format
Set the date format according to
your local preference
• Set Date
Enter the current date here
• User Group
Toggles User List between local
users and network users
• User List
Once a user group is selected,
from above, the users belonging
to that group will be displayed.
Using the Add, Edit and Delete
buttons, the list and users can
be changed
• Automatic Logout
Toggles wether or not user is
logged out after a set time
• Set Time
Enter the current time here
• Timezone Setting
Set your local time-zone here
• Auto Synchronize Time
Adjusts and sets system time to
match network server time
• Enable DST
Set time to adjust
for Daylight Savings
Why Set a Date & Time?
It’s important to set the proper date and time before continuing so that you can easily locate recorded events.
Inaccurate dates and times on files may affect their admissibility as evidence in court. In addition, when
changing current time settings, to avoid possible confusion with the time stamps on recorded and currently
recording files, stop all ongoing recording processes before altering the system time and restart recording
using the new settings.
• Wait [x] Min
Adjusts time interval before user
is logged out if Automatic Logout
is selected. Enter the desired wait
time in minutes in the box
General Menu (Continued)
Path: System Setup>General
Page 18
Channel Menu
Path: System
Setup>Channel
Use the Channel
Menu and its
submenus to adjust
Channel Display
settings, including
resolution, menu
display position,
privacy masks, audio
settings
• View Setting
This tab adjusts certain
channel appearance options
• Copy
Will copy one
channel’s settings
to the rest of the
channels.
NOTE: Channel
Name will not be
copied
• Default
Will reset all
channels to
their default
settings
• Arrange Views
This will open a 16-view
screen where the different
channels can be rearranged on
the display to your preference
NOTE: The system will ask to
reboot after saving changes.
• Channel
The channel
number
according
to view
arrangement
• Channel
Name
The channel
name can be
changed here,
i.e., CH01 will
be displayed as
Front Hall
• OSD Pos.
Choose where
channel stats
are displayed
• Hide Video
Check this if
you do not
want the
channel to be
displayed.
NOTE:
Recording and
other functions
will still operate
for the channel
• DVR Port
Shows which
port the camera
for the channel
is plugged into
on the bacl of
the DVR
• Privacy Mask
This tab allows the creation of masks to block certain
areas from being recorded
• Copy, Default, Arrange View
Operate just as in the View Setting tab
SYSTEM SETUP
CHANNEL MENU
Page 19
• Volume
Toggles volume level for audio
channels
• Resolution (Main)
Choose between
“None(Camera Default)”,
“CIF(352x288)” or
“D1(720x480)” resolutions
• kbps (Main)
Choose transmission rate
for camera channel
NOTE: A higher kbps will
result in larger video files
• Resolution (Minor)
Choose between
“None(Main Setting
Default)”, “QCIF(176×144)”
or “CIF(352x288)”
resolutions over network
• kbps (Minor)
Choose transmission
rate for camera
channel over a
network connection
• Fluency (Minor)
Selects the frame rate that is
transmitted over the network.
A higher frame rate will
increase network data rate
• Audio
Audio channel number
• Audio Compress
Close or Open audio compression
• Audio Monitoring
Close or Open audio monitoring
• Bind with Audio
Choose which video channel the
audio will match up with
Channel Menu (Continued)
Path: System Setup>Channel
SYSTEM SETUP
CHANNEL MENU
Page 20
Network Menu
Path: System Setup>Network
Using the Network menu, settings for the DVR’s
connection to a network and the internet can be
changed and adjusted.
• PPPoE
Click Set to setup the DVR to comminucate over
DSL or 3G wireless networks. You will need the
account information from your Service Provider
• IP
The DVR’s IP address can
be manually set here
• NetMask
The IP Subnet Mask can
be manually set here
• Gateway
Set the Gateway IP
address here
• DNS
Select the DNS IP address
for the network here
• Device Port
Used to select an open
port on a network router
for the DVR to access
• Automatic (DHCP)
Click here to automatically
assign an IP address to
the DVR once connected
to a network
• MAC
This is the MAC address
for the DVR
• Device ID
This is the SmartBridge
Device ID for the DVR
• Status
Network status of the
DVR
SYSTEM SETUP
NETWORK MENU
Page 21
• WebCC
Toggle Web Closed
Circuit capability
over the network
• Port
Set an open port for
WebCC to access on
the network
• Bi-directional talk
Enable the use of two
way communication
over a network
• Audio
Choose the Audio
Channel to broadcast
over network
• Service
Sets parameters to use a Closed Circuit platform over a
network connection
Network Menu (Continued)
Path: System Setup>Network
SYSTEM SETUP
NETWORK MENU
Page 22
Alarm Menu
Path: System Setup>Alarm
Settings for different alarm parameters can be set
from the Alarm menu, including how and when an
alarm is triggered.
Use the Alarm In feature to configure alarm
settings. NOTE: External alarm devices must
be connected to the alarm block on the rear
panel of the DVR in order to use the I/O (input/
output) alarms of the system. See page 25
“Alarm Inputs” and “Alarm Inputs Diagram”
for details on attaching alarm inputs.
• Channel
Indicates the channel
• Enable
Sets the alarm settings for a
channel to on or off
• Set
Set the Sensitivity and Area of Motion Detection for the
selected channel to set an alarm
• Copy
Copy a selected channel’s
setting to all other channels
• Default
Reset all channels to default
settings
Alarm Inputs:
Alarm inputs are devices or switches that activate when a door, window,
cabinet etc. is opened or accessed. For example, you might want to only
have the camera record when someone opens a tool cabinet or when a door
opens vs. recording when motion occurs around those areas. There may
be people moving by those areas frequently but you are only concerned
about when those areas are accessed. This saves hard drive space and
makes it easier to find an event that was recorded to the hard drive.
Select Alarm in Module:
Alarm Input cables of device of Alarm in: one is connected with “COM” port,
the other is connected with the port “1/2/3/4” (This should be in accordance
with Alarm Input ID 1/2/3/4 in DVR software). The below figure shows the
Alarm Input cable has been connected with Port 1, so the Alarm Input 1
should be set in DVR software.
Alarm Output:
Alarm output is used to activate an external device such as a horn
or light after an alarm is triggered. To do this the DVR uses a dry
contact normally open relay. To configure alarm outputs, connect the
external device to the out connections on the alarm block as required
by the device. The maximum contact rating is 24 VDC @ 3A. Alarm
input can start recording on any one of the camera channels.
SYSTEM SETUP
ALARM MENU
• Alarm Output
Determine how the system
iniates the Alarm alerts, including
sending an email, sounding a
buzzer, etc. (See also pg. 23)
Page 23
• Alarm Output
Determine how the system iniates the Alarm alerts,
including sending an email, sounding a buzzer, etc.
• Channel
Indicates
the channel
• Enable
Sets the alarm settings for a
channel to on or off
• Work Mode
Indicates wether the alarm channel
switch is normally open or closed
• ID
Indicates the channel, only the first 4
can receive an external alarm signal
• Keep Alarm
How long the alarm will be active
before being cancelled
• Turn on Buzzer
Activate DVR alarm buzzer
• Send to Client
Alarm will be forwarded to another
connected DVR
• E-Mail Client / Send Snapshot
Send email notifying addressee
of alarm, and select if a photo of
channel is sent
• Start to Record
Select channel to record when
current channel sets alarm
• Call Preset
Begin PTZ camera preset for a
channel. NOTE: The alarm channel
and PTZ channel can be two
seperate channels
• Snapshot
Take a photo of a channel. NOTE: The
alarm channel and Snapshot channel
can be two seperate channels
• Output Module
Send email notifying addressee
of alarm, and select if a photo of
channel is sent. NOTE: The alarm
channel and Snapshot channel can
be two seperate channels
Alarm Menu (Continued)
Path: System Setup>Alarm
SYSTEM SETUP
ALARM MENU
Page 24
• Channel
Indicates the
channel
• Enable
Sets the
alarm
settings
for a
channel to
on or off
• Start Time
Indicates time to
begin settings.
NOTE: 24 hour clock
• End Time
Indicates time
to end settings.
NOTE: 24 hour
clock
• Start Time
Indicates time to begin settings.
NOTE: 24 hour clock
• End Time
Indicates time
to endsettings.
NOTE: 24 hour
clock
• Start Time
Indicates time to begin
settings.
NOTE: 24 hour clock
• End Time
Indicates time
to end settings.
NOTE: 24 hour
clock
Alarm Menu (Continued)
Path: System Setup>Alarm
SYSTEM SETUP
ALARM MENU
Page 25
• Inbound Setting
Select settings for DVR to
receive email
• Inbound Site
Enter the site for the inbound
mailbox
• Modify
Adjust Inbound email settings
• Add/Delete
Add or Delete Inbound email
settings
• SMTP
Simple Mail Transfer
Protocol settings for
the outbound email
address
• User Name
Username/
address of
outbound email
• Password
Password of
outbound email
• Interval
How often to send email
in alarm state
• E-Mail
Adjust settings for E-Mail alarms, and destination
email address and settings
• Mail Testing
Click to send a
test email and
confirm settings are
working
This symbol means
channel is recording.
Indicates motion detect is enabled.
Indicates motion detected.
COM
NO
NC
ALARM
COMCOMOUT 34 2 1
From NO or NC depending on setup
selected to alarm inputs 1 through 4
Use COM from
alarm block
to Switch COM
Example Device:
Door Sensor
Note: Switch COM must be connected to COM in alarm block for device to operate properly
Alarm Menu (Continued)
Path: System Setup>Alarm
SYSTEM SETUP
ALARM MENU
Page 26
• Type
Filter log display according to
type of event
• Backup
Record log file to an external
USB drive
• Date
Narrow results to a specific
date
• Description
Brief summary of event
• Event Number
DVR identity, log event number
• Time
Date and Time of logged event
SYSTEM MENU
System Menu
Path: System Setup>System
Access system logs, system
maintenance options and
information on the DVR
• Detail
Detailed information of a
selected log event
SYSTEM SETUP
Page 27
• Scheduled Restart
Toggle if/when the DVR will do
an automatic reboot. NOTE:
time is on 24 hour clock
• Update
Manually update DVR
• Import Setting
Import settings from another
DVR via USB drive
• Product Model
Model version of the
DVR
• Device ID
Unique identifier for DVR
• Software Version
Current software running
DVR
• Hardware Version
Current hardware running DVR
SYSTEM MENU
• Update Type
Select where data is pulled
from to update the DVR
• Reset Factory
Reset the DVR to factory
settings. This will erase all
settings on the DVR
• Export Setting
Export settings to another
DVR via USB drive
• Serial Number
Production identifier for DVR
• Software Release Date
Release date of current
software running DVR
• Information
Information on DVR ID and other identifications
• maint
Settings and options to update DVR
System Menu (Continued)
Path: System Setup>System
SYSTEM SETUP
Page 28
DEVICE MENU
Device Menu
Path: System Setup>Device
Access device options for
hardware connected to the
DVR
• Device
Storage device type and
name
• Used
Amount of data on device
• Capacity
Amount of storage capacity
of device
• Format
Format storage device.
NOTE: This will delete all data
on device
• When Hdisk is Full
Toggle option to overlay or
stop recording when Hard
Drive reaches capacity
• Status
Current status of the
Hard Drive
Formatting the Internal Hard Drive
If you installed a new hard drive, you must format the hard drive in the DVR before it can be used. Clicking on
the HDD Format button will begin the formatting process. After formatting, the system will restart. ATTENTION:
Formatting the internal HDD erases all video data. This step cannot be Undone.
SYSTEM SETUP
Page 29
DEVICE MENU
• Channel
Select the channel that
has a PTZ camera
• Protocol
Select operating code for
PTZ camera
• Left Right Swap
Mirror joystick left/right
movement
• Width of Monitor
Adjust display
horizontal aspect
• Height of Monitor
Adjust display vertical aspect
• Address
Address of the PTZ
camera
• BR
Baud rate
• Iris Zoom Swap
Mirror zoom motion on
joystick
• Device ID
For use with multiple DVRs,
select a simple number ID for
the DVR. NOTE: This can be
between 0 and 255
• Up Down Swap
Mirror joystick up/down
movement
• Focus Zoom Swap
Mirror focus zoom motion
on joystick
• Zoom Swap
Mirror zoom motion on
joystick
• Preset
Select and adjust preset
for PTZ camera
• Patrol
Select and adjust patrol
preset for PTZ camera
System Menu (Continued)
Path: System Setup>System
SYSTEM SETUP
Page 30
VIEW LAYOUT
VIDEO OPERATION
View Layout
The number of channels displayed can be controlled from this menu.
One camera channel can be selected to fill the whole display, or a number of
different channels can subdivide the display.
• View 1
Select which Channel to fill entire display
• PIP
Channel 1 and 2 will be displayed. Channel 2 will display as a PIP.
• View 4
Channels 1,2,3,4 wil be displayed
• View 8
Eight channels will be displayed, with the sequence determined by which
channel was previously selected
• View 9
Nine channels will be displayed, with the sequence determined by which
channel was previously selected
• View 16
All sixteen channels will be displayed
VIEW 1
VIEW PIP
VIEW 4
VIEW 8
VIEW 16
VIEW 9
Page 31
VIDEO ADJUST
VIDEO OPERATION
• Standard, Soft, Bright
Clicking one of these buttons
will set the adjustments to the
matching default settings
Video Adjust
Each camera channel can be adjusted individually
for brightness, contrast and saturation. To adjust:
1. Channel: Select the proper channel for
adjustment using the Channel drop down.
2. Brightness, Contrast & Saturation may be
adjusted by placing and clicking the mouse cursor
with the appropriate rectangle. Finer adjustments
can be made by clicking the + and - squares.
3. Repeat process for all channels as desired. Or
click DEFAULT, to return video to the original
factory settings.
4. Click SAVE.
• Copy
Will duplicate the
current settings
on the next
channel selected
• Save
Will save
the selected
settings
• Channel
Use the drop
down menu to
select which
channel’s video
to adjust
• Mode
Each channel has two sessions available,
which can be set using the timer to
change between settings automatically,
i.e., between day and night. Timer uses 24
hour clock, i.e, 17:00 instead of 5:00pm.
• Lightness
Adjust the
lightness of
the channel
between 0 and
255 units
• Contrast
Adjust the
contrast of
the channel
between 0 and
255 units
• Chroma
Adjust the
chroma of
the channel
between 0 and
255 units
• Hue
Adjust the hue
of the channel
between 0 and
255 units
• Sharpness
Adjust the
lightness of
the channel
between 0 and
15 units
Page 32
PTZ
VIDEO OPERATION
PTZ
Pan/Tilt/Zoom (PTZ) Setup:
NOTE: Consult the instruction manual of your PTZ
camera for complete information about your camera,
including protocol, baud rate and parity settings before
beginning setup. Enter these settings in the DVR.
STEP 1:
Connect your PTZ Camera to this DVR
Connect a PTZ camera to the BNC and DC power
cables. Also, connect the communication cable from the
PTZ camera to the 485A (TX, +) and 485B (RX, -) control
inputs to the PTZ block on the back of the DVR. Note
there is only one set of PTZ control inputs (485A & 485B),
however multiple PTZ cameras can be set up by making
parallel connections. See diagram for details and see
“PTZ Camera Setup” Info box for additional information.
Step 2: Configure PTZ Communication Settings
To access this menu, from the setup menu click
DEVICE. Then PTZ. This will bring up the PTZ setup
screen. PTZ setting options for each camera can be
selected independently for each camera channel
1. Select the appropriate channel connected to the PTZ
camera using the drop down
2. Under ADDRESS, enter an address from 001–255 using
the virtual keyboard
3. Under protocol, select the appropriate protocol based
on the setting of the camera using the drop down menu
(PELCO-D, PELCO-P, PELCO-D EXT, PELCO-P EXT,
PELCO-D-3)
4. Under BAUD rate, select 1200, 2400, 4800, 9600 as set
in the PTZ camera
5. Click OK to confirm settings. Click EXIT to leave screen
without making changes
LEFT/RIGHT, UP/DOWN, IRIS ZOOM, FOCUS
ZOOM and ZOOM EXCHANGE will reverse the
actions taken when moving or zooming the camera.
For example movement to the left, becomes
movement to the right and movement to zoom
in is reversed to movement to zoom out.
NOTE: Changes to the PTZ setup screen take place
immediately. However, in the event of a power failure,
the settings can revert to the previous settings. It is
recommended to perform a power down and restart
through the drop down menu to save changes in
order for the system to operate with these changed
PTZ setting should a power failure occur.
Configure the operation & control of your
PTZ camera(s):
In live view, double click on the channel with the
connected PTZ camera to open to full screen view. This
selects the channel to configure and control.
1. From the quick access menu select PTZ. this will bring
up the PTZ manual control screen
2. From the PTZ setup screen you can adjust:
• Pan speed: Adjusts the speed (1-255) the camera
PTZ Manual Control Screen
PTZ Patrol Screen
PTZ Preset Screen
Install 120 Ω
terminating
resistor in last
camera only
AB AB AB
~
~
PTZ Inputs Configuration
RS485
+ – + –
Page 33
CLIENTS
NETWORK OPERATION
Clients
This menu will display a current list
of network users logged onto the
DVR. The menu will allow a user of
the DVR to disconnect one or all
network users from this screen.
• Connections
Number of
connected
network users
• Channel
Network
pathway that
connected user
is using
• IP
IP address of
network user
• Port
Open port on
router that
network user is
logged through
• Disconnect
Will disconnect a
selected network
user
• Disconnect All
Will disconnect all
network users
will move while being controlled
manually. Certain PTZ camera will use
only part of the range.
• Zoom: “+” zooms in and “-” zooms
out
• Focus: “+” and “-” focuses the pic-
ture.
• Iris: “+” lets more light in and “-”
removes light from the picture. This is
useful to correct backlight issues.
• Directional keys: left and right arrows
control the pan; up and down arrows
control the tilt.
Setting Of Presets
Presets are camera positions setup in
advance. The DVR can control the camera
to move the PTZ camera to the proper
preset position.
To set up a preset, click more from the PTZ
manual control screen, to gain access to
the PTZ patrol screen. and then click set
to create preset positions. See PTZ preset
screen.
To set up a preset use the ptz preset
screen. do the following:
1. Use the directional arrows to set camera
to the preset position desired.
2. Place a preset number in the box next to
add and input the length of time, number
of seconds you would like the preset to
be positioned at the preset.
3. Click add. The newly added preset will
now be available in the preset drop down
field.
4. Repeat the process to add the proper
number of presets desired.
Viewing A Preset
Presets may be viewed by selecting
the appropriate preset using the drop
down and then clicking goto. this can be
accomplished on either the PTZ patrol
screen or the PTZ preset screen.
Executing A Patrol (Tour)
Use the PTZ patrol screen to set up a
patrol. The patrol will move from one
preset to the next preset in the order
that is indicated in the drop down. When
executed, the patrol will remain at a
camera preset position The length of time
indicated under stay time for that preset.
Click start patrol to start the patrol. Click
stop patrol to stop the camera from
patrolling through camera presets.
Page 34
SNAPSHOT & PHOTO
RECORDING OPERATION
Snapshot
Snapshot is used to take
a photo of a particular
channel
• Taking a Snapshot
Using the mouse, left-click
on a channel display to
take and save a snapshot
• Exiting Snapshot
Using the mouse, right-
click to exit snapshot
Photos
Photo is used to review photos
taken by the snapshot tool
• Search Type
Use the dropdown menu to
narrow the results to how the
photo was recorded
• Channel
Use the dropdown menu to
narrow the results to one
channel’s photos
• Start/End
Use the fields to narrow search
between two specific dates
• Backup
Select to store files to an external
USB drive
Files are
displayed here
Page 35
RECORD SETUP
RECORDING OPERATION
Record Setup
Record Setup is used
to set scheduled or
manual recording
• Channel
List of channels
• Manual
Select to begin manual
recording of a channel
• Scheduled
The “Set” Button will
launch a new sub
menu to set recording
schedules when
Type is changed to
“Scheduled”
• Set
See page 36 for
the submenu
that will set
scheduling
• Copy
Will copy one
channel’s settings
to the rest of the
channels.
• Default
Will reset all
channels to
their default
settings
Page 36
Scheduling Recording (cont.)
Scheduled will appear
when the “Scheduled”
type is selected from the
Record Type menu for
each channel (See page
35)
• Set
Will launch a menu to
adjust recording types and
settings for each day of
the week
• Regular
Indicates channel
has a scheduled
recording at that
time
RECORD SETUP
RECORDING OPERATION
• Motion Detect
Indicates that
recording will
begin on motion
detection
• Alarm
Indicates that
recording will
begin on alarm
activation
• No Recording
Indicates that
no settings have
been entered
Page 37
RECORD SETUP
RECORDING OPERATION
Record Setup
Use the Scheduled submenu, accessed from Record Setup (See page 36),
to set various recording styles and times for each channel. Use the mouse to
click and drag a time or set the time by using the on-screen keyboard.
• Regular
Set a recording
by blocking out
a time on the 24-
hour indicator
• Motion Detect
Set a motion
detection
recording by
blocking out a
time on the 24-
hour indicator
• Alarm
Set an alarm
recording by
blocking out a
time on the 24-
hour indicator
• Week
Select day of the
week
• Channel
Indicates Channel that is
being scheduled
Use these
controls
to set with
onscreen
keyboard
• Copy
Copy to another
channel
• Default
Return all settings
to default
Use the mouse
to click and drag
a time or set the
time by using
the on-screen
keyboard.
Page 38
PLAYBACK
RECORDING OPERATION
Playback
Recorded video is accessed through the Search Recording screen.
To access the recordings, right click the mouse to access the quick menu
drop down. Select PLAYBACK. The SEARCH RECORDING screen will appear
on screen.
To Find & Play Recordings:
1. Choose the target channel to search recordings on, or select ALL.
2. Select the TYPE of recording by using the drop don. Selections include
Manual, Schedule, Motion Detect MD, Alarm and All.
3. Input recording search date using the virtual mouse. The file list will show
all recordings available based on your selection criteria.
4. Highlight the recording to play back and select PLAY.
Recording Backup
5. Place a formatted USB into one of the USB slots on the back panel of the
DVR. Make sure there is enough room on the USB device for the recording
to be backed up.
6. Highlight the recording file to be backed up, from the file list selection.
7. Click the Backup Icon.
The file will be backed up on the USB disk.
NOTE: The system is compatible with most major
brands of USB flash drives, with capacities from
256 MB to 4 GB. Backup files come formatted in
.mp4 format. To view these files from your PC,
install the .mp4 software from your installation CD.
Play
Starts playback of
selected video
Pause Pauses the playback
/
Play by
Frame
Moves recording frame by
frame
Slow Play
Reduces the playback
speed to 1/4X
Fast Play
Increase the play speed
up to 4X
Snapshot
Takes a snapshot with
the recording. Access to
Snapshot resides in the
SnapShot Review page
Sound
ON/.OFF
Turns sound from
recording ON or Off
Apply to
All
Show/
Hidden
Shows or hides On screen
controls
Exit
Press to leave Playback of
this video and go back to
recording file list
Audio/Video Recording
Caution: Audio surveillance in some states is illegal or requires permission from one or both parties to
record someone’s voice. Laws are also different from residential vs. commercial applications. Some federal,
state, and local laws prohibit certain surveillance activities and/or the use or distribution of the information
obtained from such activities. Prior to using this system, you should become familiar with the pertinent laws to
ensure compliance with those applicable to surveillance activities.
Page 39
CLEAR ALARM & SHUTDOWN
SYSTEM OPERATION
Clear Alarm
Clears and
cancels current
channel alarms
• Current
Cancels current
alarm on a
channel
• Clear All
Clears all alarms
on all channels
Shutdown
The system provides the ability
with a controlled shut down,
through a power down or with a
Restart. To access the shut down
system menu, right click the
mouse to see the drop down quick
menu and then select Shutdown.
The following screen appears.
Logout: Logs the user out. A request
activity to the DVR from any user will
require a login and password to gain
access to the system.
Power off: Power Off shuts the
system down in a controlled manner.
The hard drive is kept running. If user
wants to shutdown fully, user needs
to turn off the button on back panel of
DVR.
Restart: Provides the user with a
restart. The system will shut down and
restart in a controlled way.
Page 40
Network Setup for Remote Access
Your Smartbridge system is capable of connecting to a
local area network (LAN) to view remotely, without the use
of port forwarding. Please follow the steps below.
1. Right click and select “System Setup.” Then
select “Network,” then “Setting”. This will allow
you to view all of your network settings.
2. Plug the Ethernet cable from your router the
Ethernet port on the back of the DVR.
3. Plug the ethernet cable from the DVR to a
free ethernet port on the router.
4. Make sure “Automatic DHCP” is check marked.
5. Your IP address, subnet mask, DNS, and gate will
automatically populate AFTER you restart the DVR.
6. Port should stay at 9101.
7. Note the Device ID in the dialogue box. This is your
unique Smartbridge ID Code. (pictured right)
8. Online Status should display online when you have
connected the Ethernet cable into the Ethernet Port
on the DVR. You must also have internet on you
home network for this to work. (pictured right)
9. You must install the Smartbridge software to your
computer to view the cameras locally or remotely.
10. Insert the CD Rom disk into the CD drive on
your computer. Run Smartbridge.ex
11. Click Install to start the installation wizard and
to install the Smartbridge Software.
12. The Smartbridge Icon will appear on your desktop
after the installation wizard is finished. Double click
the icon to run the Smartbridge Software.
REMOTE ACCESS
NETWORK SETUP
Network Setup for Remote Access
Page 41
REMOTE ACCESS
NETWORK SETUP
1. The connect tab is for connecting to one
SmartBridge DVR only. Use the advanced Tab
when connecting to multiple Smartbridge DVR’s
at once. (Group). See adding groups section.
• Click Port to enter the port settings. This is
to assign a router port that is open. Typically,
this is set to 9101 (recommended)
2. The Device ID is the ID number found on your DVR system.
This will be the letter A followed by a series of numbers.
Enter your device ID. The default password is 123.
3. Click login.
1. You are now connected to the SmartBridge DVR remotely. All cameras that are connected to
your SmartBridge system should now be shown on the Smartbridge software screen.
Page 42
Press this button to connect all cameras connected to the Auto ID system. Also, Right click on a camera source screen
and select connect.
Press this button to disconnect all cameras connected to the Auto ID system. Also, Right click on a camera source
screen and select disconnect.
Press this button to Record to an external hard drive (80gb or larger required)
Press this button to take a snapshot image of a selected camera window. Image is automatically saved to the external
hard drive. (80gb or larger required)
Press this button to play video recorded to the external drive after the record external button has been pressed.
Press this button to select the advanced settings features.
Press this button to open the settings window.
Press this button to isolate all connected cameras to POP Up windows which can be easily moved around on the desk-
top.
Press this button to minimize the Smartbridge software and to return to your desktop.
Press this button to Exit the software.
This displays the channels that are connected. When a channel is connected, it will show a green bar on the left of the
channel number. The green bar will be off when the channel is disconnected. A green bar will be below when a channel
is selected.
Press to see recorded les on DVR system (See start/stop master recordings)
Press to search for recordings on a specic day on the DVR system.
REMOTE ACCESS
NETWORK SETUP
Page 43
If your amount of free space is low on the hard drive, select
overwrite previous recorded files to write over prerecorded
files. Select stop recording and make notification to stop
all recordings when disk drive space is full and Smartbridge
will make a notification that the drive is full
You are able to record using the remote software simultaneously to recording on the Smartbridge DVR system. In order to
record using the Smartbridge remote software, you will need an 80 GB minimum external hard drive formatted to FAT32.
1. Plug an external hard drive into your computer. Your operating system should associate
a drive letter to the hard drive. Once the hard drive is connected,
2. Click the settings button and click the storage tab. The drive letter your operating system associated to the
external device is visible in the list. Check the drive letter that you want the recordings to be saved to:
3. Select a channel to record, right click
and select start recording or click
to start recording. To
stop recording, right click on the channel and select stop
recording. All recordings will be saved to the external
hard drive.
• You can also set the cameras to record
directly to the DVR system hard drive from the
Smartbridge remote software. This is option is
only available if you are connected to the same
network using the Smartbridge software. Right
click on the channel and select Start Master
Recording. This will start a recording directly
to the Smartbridge DVR and not to the external
hard drive. To stop the recording, right click on
the channel and select Stop Master Recording.
External Recording
REMOTE ACCESS
NETWORK SETUP
4. Select a Channel, Click to capture a still image of a camera in
view. This image will be saved to the external hard drive.
Page 44
5. Select Playback external to play back recorded files.
All files available on the External hard drive can be played back on the Smartbridge Software. Select the channel
from the dropdown of the channel you would like to playback. Double click the file you would like to playback.
External Playback
Opens a saved .sv5 le
to play.
Plays a recorded video
Stops a recorded video
during playback
Click repeatedly to Fast
Forward at different speeds
of a recorded video
Click repeatedly to play a
Slow forward speed of a
recording.
Click repeatedly for reverse
playback of a recording
Manually set slow play-
back.
Takes a snapshot of a
recording
Shows sixteen channels in
sixteen screens
Shows selected channel in
full screen
Saves a recording to an
.sv5 le on the hard disk
Shows the times record-
ings started in a list view
REMOTE ACCESS
EXTERNAL PLAYBACK
No Function
No Function
Plays all recordings
Plays no recordings
Turns audio On or Off
Shows One Screen
Shows four channels in
four screens
Shows nine channels in
nine screens
Page 45
Settings
Select to adjust specific settings for your Smartbridge DVR. (See recording external for Storage
Tab information) Select the Advanced Tab.
Check the Place system always on top box to place the Smartbridge
on top of all other software within the operating system.
Check the Disabled Ctrl-Alt-Del when system is locked box to disable the use of Ctrl-Alt-
Del when you lock the system. To lock the system, see Advanced Settings section.
Check the Enable devices management to enable the devices management tool. This will allow the Set
Remotely feature to be enabled when you right click on a source screen and select Set Remotely.
REMOTE ACCESS
SETTINGS
Page 46
Advanced Settings
Select to open the advanced settings options for your Smartbridge DVR
• Switch User (Feature enabled in advanced mode only): Switches between users (see setting up groups)
• TV Mode: Select TV mode to place all connected channels to
share the full screen. Right click to exit TV Mode.
• Lock System: Select Lock System to lock the Smartbridge Software. This
will prevent anyone from tampering with the DVR Software.
• Unlock System: Select Unlock System to unlock the Smartbridge Software from
the lock state. You will have to enter your User ID and Password.
• Group Sequencing Display: Starts a rotation from one group and another
providing you have more than one DVR in your group settings.
• Operation Log: Displays the Operation Log History
• Snapshot Manager: Opens the display manager to search and
view snapshots. (See Recording External section)
• Stop Sound Card Alarm: Stops the sound card alarm feature
• Clear Operation Log: Deletes the operation Log History
• Screen Splits:
o Display the screens in 1, 4, 9, 16, or 25 camera views.
REMOTE ACCESS
ADVANCED SETTINGS
Page 47
Pan Tilt Zoom
If you have pan tilt zoom cameras installed, you are able to control the pan
tilt zoom cameras remotely with the Smartbridge Software.
Press to move PTZ camera up
Press to move PTZ camera left
Press to move PTZ camera down
Press to move PTZ camera right
Iris
Adjust the color of the PTZ camera
Focus
Adjust the focus of the PTZ camera
Zoom
Zoom in and out
REMOTE ACCESS
PAN TILT ZOOM
Page 48
REMOTE ACCESS
DVR GROUPS
To add a group, Select settings
To add a group, select the Video Source/group Tab
• Select add group.
• Type the name of the group in the current group box.
• Select Modify to save the new group.
o Enter the username and password
o Enter an Alias name for the group.
o Enter the Device ID of your Smartbridge
DVR system for the group
o Select receive remote alarm signals if you want
to receive an alarm alert for your Smartbridge DVR
o Select Enable Pop Up to enable pop ups
• Select add source to add a camera source
• Select DEL Source to delete a camera source
• Select Default to revert back to default settings
• Select Apply to all to apply all settings to all
camera sources within the group
• Select Save to save all settings.
Select the Local User Tab to add user rights/permissions to
the Smartbridge Software. You are able to add users to the
Smartbridge Remote viewer software. Administrator has full access
to the all features. General user has viewing capability only.
Setting Up Groups
With the Smartbridge Software, you are able to set up multiple DVR’s for remote viewing
called groups. This is beneficial if you have multiple locations requiring surveillance. To set
up a group, you need to have more than one Smartbridge DVR connected to a network.
Select the Advanced Tab
Default username is abc and default password is 123
Page 49
Web service - currently not function
Mobile service - to enable mobile browsing
Port - this is the web port which should always be at 80
Quality- selects the quality of the streaming video
Channel - select channel you would like to apply settings to
Device ID - shows your DVR ID number
FPS - frames per second. The higher the fps, the better
Register- No function
Set time- set date and time
With the Smartbridge software, you are able to configure camera settings remotely. To do this, right
click on any camera source that has a camera connected and select set remotely. (Note, for this
feature to be enabled, you must select the enable devices management box in settings – Advanced.
Remote Configuration
REMOTE ACCESS
CAMERA SETTINGS
Page 50
Channel –select channel of the PTZ
Ch name – give the channel number a name
Main – quality of camera -
CIF or D1 on 4/8 channel
Standard/Net Mode on 16 channel
Minor- low quality of camera-
Select QCIF, CIF or None.
PAL/NTSC –default is NTSC
Audio- turns audio on or off (only works if a mic is installed)
Position - Changes the position of the
date and time and ch. No.
Select Left down, Left up, or None.
Main size- chose the size of
the file for streaming. Size is
by MB/H(megabytes per hour)
Minor size- chose the
lowest number of MB/H
Minor FPS - Choose the frames per
seconded – higher the better
PTZ
Address: Address of the PTZ camera
Protocol: Choose the protocol of the PTZ
NOTE: ONLY compatible with pelco-D
Band Rate chose the band rate of the PTZ
Record task - sets your scheduling recording
Device Logs ScreenPTZ Options Screen
REMOTE ACCESS
CAMERA SETTINGS
Page 51
Hard Drive Removal and Installation
HDD Installation
To replace the hard drive in the DVR:
1. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
UNPLUG ALL POWER SOURCES, INCLUDING CAMERAS
FROM THE DVR BEFORE REMOVING COVER. FAILURE
TO DO SO CAN RESULT IN DAMAGE TO THE DVR OR
ITS COMPONENTS AS WELL AS INJURY OR DEATH
2. Remove screws securing the cover of
the DVR and remove cover.
3. Disconnect the hard drive power and data cables.
4. Remove old hard drive and replace with the new one.
5. Re-install the screws securing the hard
drive to the bottom of the DVR.
6. Re-connect the hard drive power and data cables.
7. Replace the cover and screws. NOTE: Format hard drive
per instructions in HDD MANAGEMENT section.
Caution!
When working with electrostatic sensitive
devices such as hard disk or DVR
unit, make sure you use a static-free
workstation. Any electrostatic energy
coming in contact with the hard disk or DVR can damage
it permanently.
Hard Drive Format
NOTE: A new hard drive must be formatted
after installation. Format per instructions
in the HDD MANAGEMENT section of this
manual.
Hard Drive - Connected to Circuit Board
Hard Drive Remove/Install Screws from Below
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
UNPLUG ALL POWER SOURCES, INCLUDING CAMERAS FROM
THE DVR BEFORE REMOVING COVER. FAILURE TO DO SO CAN
RESULT IN DAMAGE TO THE DVR OR ITS COMPONENTS AS
WELL AS INJURY OR DEATH.
The lightning ash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of un-insulated
“dangerous voltage” within the product’s enclosure that may be of
sufcient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle, is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
CAUTION!
RISK OF ELECTRIC SHOCK
APPENDIX
HARD DRIVE
Page 52
Technical Specifications
Item Device Parameter Specification
System
Language English/ Spanish/ French
GUI 16 Bit Graphic menu (OSD Menu)
Password User password, Administrator password
Video
Video in 4/8/16 channel composite video input 1.0Vp-p, impedance 75Ω, BNC
Video out 1 VGA, 1 BNC (CVBS), 1 HDMI
Video display 4/8/16 channel: 1/4/8/9
Video standard
PAL, (Europe) 25 f/s, CCIR 625line, 50 scene
NTSC, (US) 30 f/s, CCIR 525 line, 60 scene
Audio
Audio input 2-ch audio input, impedance 600Ω, RCA
Audio output 1-ch audio output, impedance 600Ω, RCA
Record style Audio video recorded simultaneously
Audio compression ADPCM
Picture
processing
and storage
Picture compression H.264
Picture resolution CIF/D1
Audio style ADPCM
Video code rate
CIF: 384~768 Kbps
D1: 512~1024 Kbps
Audio code rate 32 KB/s
Data storage 500 GB or 1 TB SATA HDD included, up to 2 TB capable
Alarm
Alarm input 4 alarm input
Alarm output 1 alarm output
Connector
PTZ interface Supports PELCO-D
Mouse Mouse USB 1.1
Data USB 2.0
Network interface RJ45, 10M/100M
VGA VGA output
Supports 800 x 600, 1024 x 768, 1280 x 1024,
1366 x 768, 1440 x 900 resolution
Software
upgrade
USB Supports USB firmware upgrade
other
Voltage input AC:110~240V, to regulated 12VDC
Power Consumption 6W without HDD
Working temperature 14 °F to 122 °F (-10 °C to 50°C)
Video impedance input 75Ω each channel
Video output 1Vp-p CVBS signal
APPENDIX
SPECIFICATIONS
Page 53
APPENDIX
FAQ’s
If your problem is not listed below, please call our toll-free
number for more support. Tech Services: 800-323-9005.
Question: Why does DVR not work after
starting? Why did the DVR stop working?
Answer:
• Check that the power adapter is
plugged into the DVR properly
• Check the power source and all power cord
connections are properly connected
• Make sure the power on-off switch on
the back of the DVR unit is on
Question: Why does the DVR reboot automatically?
Or stop for several minutes after starting?
Answer:
• Check the supply voltage to be sure it is stable
• Bad track on hard drive or the hard drive is bad
• Instability of the front-end video signal
• High temperature, too much dust, bad
DVR operating environment
Question: Why is there no video output
on single, multi or all channels?
Answer:
• Check if the camera adaptor is properly connected
• Check the cable for connecting video input/
output in the back panel of DVR
• Insert the video source directly into the display
device and check if they are causing the problem.
• Check the brightness of the picture and bring
it back to its original default setting
• No video input signal or too weak
Question: What is the meaning of?
Answer:
Question: Why does DVR have problems
with real-time images, such as bad image
color or serious brightness distortion?
Answer:
• If PAL and NTSC are not correctly selected, the images
will be in black and white and possibly a rolling screen.
• DVR is not compatible with monitor
• The video transmission distance (cable run) is too long
• Adjust the DVR color settings
Question: Why is there no audio sound when monitoring?
Answer:
• Check sound box or speaker functions.
Also check possible short circuit.
• Audio source may be connected to the video
channel. You can click to full-screen to check.
• The hardware of DVR is defective
• Cameras are not audio capable
• Speakers need to have an amplifier
• Channel being monitored is not
connected to an audio camera
• Volume regulate is turned down
Question: Why is there no audio when playing back?
Answer:
• Check to see that the audio settings
for the channels are correct.
• Audio is off in record menu
Question: Why is my system time not correct?
Answer:
• Wrong setting or user did not click OK to confirm
Question: Why doesn’t motion detection work?
Answer:
• The setting of motion detection area is not correct
• Sensitivity is too low
Question: Why do I have no disc or disc mount error?
Answer:
• The data being downloaded exceeds
the capacity of backup device
• The backup device is incompatible
• The backup device is damaged
Question: Why doesn’t the Remote Control work?
Answer:
• The remote control is too far from the DVR
• Remote control batteries are dead or low
• Remote control is damaged, check by
using the control on the DVR
Question: Why can’t I log in over the Internet?
Answer:
• Check the network to see if it is connected.
Check if LINK or 100M LED is displayed normally
on the panel; use ping xxx.xxx.xxx.xxx (DVR IP)
to check if the Internet is linked properly.
• Make sure you are running Windows 7, Vista or XP
operating system and Internet Explorer 6.0 - 8.0
Indicates the channel is recording.
Channel is capable of providing audio.
Motion detected.
Indicates motion record enabled.
Indicates a remote log in session is in prog-
ress.
FAQ
,
s
Page 54
Error Possible Cause Solutions
System is not receiving
power or is not powering up
Cable from power adapter is loose or is unplugged
• Confirm that all cables are connected correctly
• Confirm that the power adapter is securely connected to the back
of the unit
Cables are connected, but system is not receiving
sufficient power
• Confirm that the system is powered on (LED indicators on the
front should be ON)
• If the unit is connected through a power bar or surge protector,
try bypassing the bar and connecting the power directly to the
wall outlet
• Confirm that there is power at the outlet
• Connect the power cable to another outlet
• Test the outlet with another plugged device
Remote control not detected
by the system
Battery in the remote control is drained or is missing
• Install two fresh AAA alkaline batteries in the remote control
Hard drive is not detected by
the system
Hard drive cables are loose or not properly connected
• Remove the housing and check that hard drive cables are firmly
connected
• Open the housing and install a 3.5 SATA hard drive
Mouse not detected by
system
Mouse cable is not connected or is not firmly
connected to the system
• Firmly connect the mouse cable to the USB Mouse port (not the
USB Data port) on the front panel.
System needs to be reset
• Power off the system (Turn power switch off position on back
of unit). Firmly connect a USB mouse to the USB Mouse port on
the front panel of the system. Power on the system (Turn power
switch to on position on back of unit).
There is no picture on
selected channels/camera
picture is not being
displayed
Camera cables are loose or have become
disconnected
• Check the camera video cable and connections
• Disconnect and reconnect the cable at the system and at the
camera
• Try moving the camera to another channel or use another cable
The image on the DVR
appears but does not have
sound
Audio cables are loose or have been disconnected • Check the AUDIO connections to the DVR
Audio channels are disabled insert check the system
settings
• Check the Configurations: System Setup>Channel>Audio
Volume on external speakers (not included) is low or
off
• Increase volume on external speakers (not included)
Cameras are not audio capable or a powered
microphone is not attached
• Add audio capable cameras or a powered microphone (not
included with this kit)
The system beeps at startup The beep at startup is normal
Troubleshooting
APPENDIX
TROUBLESHOOTING
Page 55
Warranty
PRODUCT LIMITED WARRANTY
BRK Brands, Inc., (“BRK”) the maker of First Alert® brand products warrants that for a period of one year from the date of purchase
(the “Warranty Period”), this product will be free from defects in material and workmanship. BRK, at its sole option, will repair or
replace this product or any component of the product found to be defective during the Warranty Period. Replacement or repair will
be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with
a similar product of equal or greater value. This is your exclusive warranty.
This warranty is valid for the original retail purchaser only from the date of initial retail purchase and is not transferable. In order
to obtain warranty service, you must keep the original sales receipt and proof of purchase in the form of the UPC code from the
package. BRK dealers, service centers, or retail stores selling BRK products do not have the right to alter, modify or any way change
the terms and conditions of this warranty.
WARRANTY EXCLUSIONS
Parts and Labor: 1 year limited (warranted parts do not include bulbs, LEDs, and batteries)
This warranty does not apply to bulbs, LEDs, and batteries supplied with or forming part of the product.
This warranty is invalidated if non- BRK accessories are or have been used in or in connection with the product or in any modification
or repair is made to the product.
This warranty does not apply to defects or damages arising by use of the product in other than normal (including normal atmospheric,
moisture and humidity) conditions or by installation or use of the product other than in strict accordance with the instructions
contained in the product owner’s manual.
This warranty does not apply to defects in or damages to the product caused by (i) negligent use of the product, (ii) misuse,
abuse, neglect, alteration, repair or improper installation of the product, (iii) electrical short circuits or transients, (iv) usage not in
accordance with product installation, (v) use of replacement parts not supplied by BRK, (vi) improper product maintenance, or (vii)
accident, fire, flood or other Acts of God.
This warranty does not cover the performance or functionality of any computer software included in the package with the product.
BRK makes no warranty that the software provided with the product will function without interruption or otherwise be free of
anomalies, errors, or “Bugs.” This warranty does not cover any costs relating to removal or replacement of any product or software
installed on your computer.
BRK reserves the right to make changes in design or to make additions to or improvements in its products without incurring any
obligations to modify any product which has already been manufactured. BRK will make every effort to provide updates and fixes to
its software via its website. This warranty does not cover any alteration or damage to any other software that may be or may become
resident on the users system as a result of installing the software provided. This warranty is in lieu of other warranties, expressed or
implied, and BRK neither assumes nor authorizes any person to assume for it any other obligation or liability in connection with the
sale or service of the product. In no event shall BRK be liable for any special or consequential damages arising from the use of the
product or arising from the malfunctioning or non-functioning of the product, or for any delay in the performance of this warranty
due to any cause beyond its control.
BRK does not make any claims or warranties of any kind whatsoever regarding the product’s potential, ability, or effectiveness to
prevent, minimize, or in any way affect personal or property damage or injury. BRK is not responsible for any personal damage, loss,
or theft related to the product or to its use for any harm, whether physical or mental related thereto. Any and all claims or statements,
whether written or verbal, by salespeople, retailers, dealers, or distributors to the contrary are not authorized by BRK, and do not
affect this provision of this warranty.
BRK’s responsibility under this, or any other warranty, implied or expressed, is limited to repair, replacement or refund, as set
forth above. These remedies are the sole and exclusive remedies for any breach of warranty. BRK is not responsible for direct,
special, incidental, or consequential damages resulting from any breach of warranty or under any other legal theory including but
not limited to, loss profits, downtime, goodwill, damage to or replacement of equipment and property and any costs of recovering,
reprogramming or reproducing any program or data stored in or used with a system containing the product accompanying software.
BRK does not warrant the software will operate with any other software except that which is indicated. BRK cannot be responsible
for characteristics of their party hardware or software which may effect the operation of the software included.
Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is
limited in duration to the duration of the above Warranty Period. Some states, provinces, or jurisdictions do not allow the exclusion
or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations
or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from
state to state, or province to province, or jurisdiction to jurisdiction.
OBTAINING SERVICE
If service is required, do not return the product to your place of purchase. In order to obtain warranty service, contact the Consumer
Affairs Division at 1-800-323-9005, 7:30 a.m. – 5:00 a.m. Central Standard Time, Monday through Friday. To assist us in serving you,
please have the model number and date of purchase available when calling.
After contacting the Consumer Affairs Division and it is determined that the product should be returned for Warranty Service, please
mail the product to: BRK Brands, Inc., 3901 Liberty Street Road, Aurora, IL 60504-8122.
APPENDIX
WARRANTY
©2014 BRK Brands, Inc.
a Jarden Corporation Company (NYSE:JAH)
3901 Liberty Street Road, Aurora, IL 60504-8122
Phone: 630-851-7330 Tech Services: 800-323-9005
www.FirstAlert.com / www.brkelectronics.com
M08-0490-000
… 32 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw BRK DVRAD0805 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van BRK DVRAD0805 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info