542139
33
Verklein
Vergroot
Pagina terug
1/49
Pagina verder
33
Without tightening, insert screw (111)
along with washer (121) into hole (X),
as shown in Fig.14.
Then position the top left side panel
(33) on the main body (7), Fig. 14.
Without tightening, insert screw (111)
along with washer (121) into hole (X),
as shown in Fig.14.
20.- Fit spacer (20) onto the arm
support (16), Fig.14, and position it on
the “U” for the main body (7).
Lift the top right side panel and secure
it using screw (110) along with washer
(124), Fig.14.
Now do the same for the left side
panel. Position the stop for the arm
support (21) on the top side panels
and tigthen securely.
21.- Fit spacer (24) onto the bottom
section of the arm support (16),
Fig.14, and secure it using screws
(110) along with the washers (124),
Fig.14. Fiinish off by securing the side
panels using (111) with their washers
(121), Fig.15.
NOTE: Once this stage of the
assembly has been completed, all of
the bolts fitted previously should be
retightened securely.
22.- Next thread cable (64), which is
already mounted on pulleys (F) and
(G) of the top body (7), Fig.16, through
pulleys (H); (I); (J); (K) and (L).
Take the chain hook (94) and join the
end of cable (64), which you have just
threaded through, with the cable
tensioner (97), Fig.16.
23.- FITTING THE GLUTEAL
PUSH BAR.-
Position the gluteal push bar support
(13) on the “U” for the gluteal support,
as shown in Fig.19.
Align the holes on the “U” with the
push bar support (13), fit the spacer
(23) and tighten securely using screws
(110) along with the washers (124).
24.- Take push bar (14) and insert it
through the gluteal support in the
direction of the arrow, insert the shaft
(25) leaving it centred and fit screw
(118), tighten securely.
25.- FITTING THE BOTTOM
CABLE.-
Take the end of the foot pull-up cable
(65) and by following the arrows
marked on the cable in Fig.18, pass it
through the first pulley (LL), as shown
in Fig.18.
Next, pass the same tip through the
lower pulley (M) and (N), Fig.18.
Continue passing the tip of the cable
(64) through the fourth pulley (O)
Fig.18. Attach the end of the cable to
the cable tensioning nut (49), Fig.18.
26.- FITTING THE GLUTEAL
SUPPORT CABLE.-
Attach the end of the cable to the
cable tensioning nut (49), Fig.19.
Take the other end of the cable (67)
and by following the arrows marked on
the cable in Fig.19, pass it through the
first pulley (P), as shown in Fig.19.
Next, pass the same tip through the
pulley (Q) and (R), Fig.18.
Continue passing the tip of the cable
(64) through pulley (S), (T), (U); (V);
(Y) and (Z) Fig.19.
27.- Attach the end of the cable to the
"U" on the tube (8) for the gluteal
support using screw (113) along with
washers (120) and nut (73), Fig.19.
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw BH Fitness G156 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van BH Fitness G156 in de taal/talen: Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 2,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info