EN
11
Installation (Under the
counter)
t*OUFSOBMIFJHIUPGUIFDPVOUFSTIPVME
be 820mm.
(!) Cookers or other heat sources
must not be placed above the counter
where the appliance is installed under
the counter.
t5IFNBJOTXBMMTPDLFUQMVHNVTUCF
close to the right or left hand side of
the appliance.
t3FNPWFUIFUPQDPWFSPGUIF
appliance. There are 4 screws(2 pieces
at the back, 2 pieces below the front
edge) that should be removed.
Fig. 1
t$VUUIFQBSUTIPXOJOUIFQJDUVSFBOE
then remove it by the help of pliers.
t1MBDFZPVBQQMJBODFVOEFSUIF
counter and adjust the front feets until
its top touches to the counter.
In order to use the product under the
counter, the distance between the wall
and the reference indicated in the top
connection plastic must be minimum
595 mm.
Fig. 2-3
t'JYUIFBQQMJBODFVOEFSUIFDPVOUFS
by using 2 of the screws that was
removed from the top cover.(Material
of the counter must be plastics or
wood based!)
Fig. 4
Adjusting the feet
If your refrigerator is unbalanced;
You can balance your refrigerator by
turning the front legs as shown in the
illustration below. The corner where
the leg exists is lowered when you turn
it in the direction of black arrow and
raised when you turn in the opposite
direction. Taking help from someone to
slightly lift the refrigerator will facilitate
this process.
