760397
56
Verklein
Vergroot
Pagina terug
1/173
Pagina verder
GN162330PN-GN162343ZGBN
EN/PL
584760 0000/AA-1/2- EN-PL
Refrigerator
User Manual
Chłodziarka
Instrukcja użytkowania
Please read this manual before using the product!
Dear Customer,
We'd like you to make the best use of our product, which has been manufactured in modern facilities
with care and meticulous quality controls.
Thus, we advice you to read the entire user manual before you use the product. In case the product
changes hands, do not forget to hand the guide to its new owner along with the product.
This guide will help you use the product quickly and safely.
• Please read the user guide carefully before installing and operating the product.
• Always observe the applicable safety instructions.
• Keep the user guide within easy reach for future use.
• Please read any other documents provided with the product.
Keep in mind that this user guide may apply to several product models. The guide clearly indicates any
variations of different models.
CImportant information and useful
tips.
ARisk of life and property.
BRisk of electric shock.
The product’s packaging is made of
recyclable materials, in accordance
with the National Environment
Legislation.
A
A
A
C
SUPPLIER’S NAME MODEL IDENTIFIER (*)
INFORMATION
C
.The model information as stored in the product data base
can be reached by entering following website and searching
for your model identifier (*) found on energy label.
https://eprel.ec.europa.eu/
2 / 40 EN Refrigerator / User Guide
1. Safety and environment instructions 3
1.1. General safety. . . . . . . . . . . . . . . . . . . . . . . 3
1.1.1 HC warning. . . . . . . . . . . . . . . . . . . . . . . . 4
1.1.2 For models with water dispenser . . . . . . . . 4
1.2. Intended use. . . . . . . . . . . . . . . . . . . . . . . . 5
1.3. Child safety. . . . . . . . . . . . . . . . . . . . . . . . . 5
1.4. Compliance with the WEEE Directive and
Disposing of the Waste Product: . . . . . . . . 5
1.5. Compliance with RoHS Directive . . . . . . . . . 5
1.6. Package information . . . . . . . . . . . . . . . . . . 5
2 Refrigerator 6
2 Refrigerator 7
3 Installation 8
3.1. Right place for installation . . . . . . . . . . . . . . 8
3.2. Attaching the plastic wedges . . . . . . . . . . . . 8
3.3. Adjusting the stands . . . . . . . . . . . . . . . . . . 9
3.4. Power connection . . . . . . . . . . . . . . . . . . . . 9
3.5. Water connection . . . . . . . . . . . . . . . . . . . 10
3.6. Connecting water hose to the product . . . . 11
3.7. Connecting to water mains . . . . . . . . . . . . 11
3.8. For products using water carboy . . . . . . . . 12
3.9 Water filter . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.9.1.Fixing external filter on the wall (Optional) 13
3.9.2.Internal filter . . . . . . . . . . . . . . . . . . . . . . 14
4 Preparation 16
4.1. What to do for energy saving . . . . . . . . . . . 16
4.2. First Use . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5 Using the product 17
5.1. Indicator panel . . . . . . . . . . . . . . . . . . . . . 17
5.2. Activating water filter change warning . . . . 28
5.3. Humidity controlled crisper . . . . . . . . . . . . 30
5.4. Using the water fountain . . . . . . . . . . . . . . 30
5.5. Filling the fountain water tank . . . . . . . . . . 30
5.6. Cleaning the water tank. . . . . . . . . . . . . . . 31
5.7. Taking ice / water . . . . . . . . . . . . . . . . . . . 32
5.8. Drip tray . . . . . . . . . . . . . . . . . . . . . . . . . 32
5.9. Zero degree compartment. . . . . . . . . . . . . 33
5.10. Vegetable bin . . . . . . . . . . . . . . . . . . . . . 33
5.11. Ionizer . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
5.12. Minibar . . . . . . . . . . . . . . . . . . . . . . . . . . 33
5.13. Odour filter . . . . . . . . . . . . . . . . . . . . . . . 33
5.14. Blue light/HarvestFresh . . . . . . . . . . . . . . 33
5.15. Icematic and ice storage box . . . . . . . . . . 34
5.16. Ice-maker . . . . . . . . . . . . . . . . . . . . . . . . 34
5.17. Freezing fresh food . . . . . . . . . . . . . . . . . 36
5.18. Recommendations for storing frozen foods 37
5.19. Deep freezer details. . . . . . . . . . . . . . . . . 37
5.20. Placing the food. . . . . . . . . . . . . . . . . . . . 37
5.21. Door open alert . . . . . . . . . . . . . . . . . . . . 37
5.22. Interior light . . . . . . . . . . . . . . . . . . . . . . . 37
6 Maintenance and cleaning 38
6.1 Avoiding bad odours . . . . . . . . . . . . . . . . . . 38
6.2 Protecting the plastic surfaces . . . . . . . . . . 38
7. Troubleshooting 39
Table of Contents
3 / 40 EN
Refrigerator / User Guide
1. Safety and environment instructions
This section provides the safety
instructions necessary to prevent the risk
of injury and material damage. Failure to
observe these instructions will invalidate
all types of product warranty.
Intended use
A
WARNING:
Keep ventilation openings, in
the appliance enclosure or in
the built-instructure, clear of
obstruction.
A
WARNING:
Do not use mechanical
devices or other means to
accelerate the defrosting
process, other than those
recommended by the
manufacturer.
AWARNING:
Do not damage the refrigerant
circuit.
A
WARNING:
Do not use electrical
appliances inside the food
storage compartments of the
appliance, unless they are of
the type recommended by the
manufacturer.
This appliance is intended to be used in
household and similar applications such
as
– staff kitchen areas in shops, offices and
other working environments;
– farm houses and by clients in hotels,
motels and other residential type
environments;
– bed and breakfast type environments;
– catering and similar non-retail
applications.
1.1. General safety
• This product should not be used by
persons with physical, sensory and
mental disabilities, without sufficient
knowledge and experience or by
children. The device can only be used
by such persons under supervision
and instruction of a person responsible
for their safety. Children should not be
allowed to play with this device.
• In case of malfunction, unplug the
device.
• After unplugging, wait at least 5
minutes before plugging in again.
• Unplug the product when not in use.
• Do not touch the plug with wet hands!
Do not pull the cable to plug off, always
hold the plug.
• Do not plug in the refrigerator if the
socket is loose.
• Unplug the product during installation,
maintenance, cleaning and repair.
• If the product will not be used for a
while, unplug the product and remove
any food inside.
• Do not use the product when the
compartment with circuit cards located
on the upper back part of the product
(electrical card box cover) (1) is open.
1
1
• Do not use steam or steamed cleaning
materials for cleaning the refrigerator
and melting the ice inside. Steam may
contact the electrified areas and cause
short circuit or electric shock!
4 / 40 EN Refrigerator / User Guide
Safety and environment instructions
• Do not wash the product by spraying or
pouring water on it! Danger of electric
shock!
• In case of malfunction, do not use
the product, as it may cause electric
shock. Contact the authorised service
before doing anything.
• Plug the product into an earthed
socket. Earthing must be done by a
qualified electrician.
• If the product has LED type lighting,
contact the authorised service for
replacing or in case of any problem.
• Do not touch frozen food with wet
hands! It may adhere to your hands!
• Do not place liquids in bottles and cans
into the freezer compartment. They
may explode.
• Place liquids in upright position after
tightly closing the lid.
• Do not spray flammable substances
near the product, as it may burn or
explode.
• Do not keep flammable materials and
products with flammable gas (sprays,
etc.) in the refrigerator.
• Do not place containers holding liquids
on top of the product. Splashing water
on an electrified part may cause
electric shock and risk of fire.
• Exposing the product to rain, snow,
sunlight and wind will cause electrical
danger. When relocating the product,
do not pull by holding the door handle.
The handle may come off.
• Take care to avoid trapping any part
of your hands or body in any of the
moving parts inside the product.
• Do not step or lean on the door,
drawers and similar parts of the
refrigerator. This will cause the product
to fall down and cause damage to the
parts.
• Take care not to trap the power cable.
1.1.1 HC warning
If the product comprises a cooling system
using R600a gas, take care to avoid
damaging the cooling system and its pipe
while using and moving the product. This
gas is flammable. If the cooling system
is damaged, keep the product away from
sources of fire and ventilate the room
immediately.
CThe label on the inner left side
indicates the type of gas used in
the product.
1.1.2 For models with
water dispenser
• Pressure for cold water inlet shall be
maximum 90 psi (6.2 bar). If your
water pressure exceeds 80 psi (5.5
bar), use a pressure limiting valve in
your mains system. If you do not know
how to check your water pressure, ask
for the help of a professional plumber.
• If there is risk of water hammer effect
in your installation, always use a water
hammer prevention equipment in
your installation. Consult Professional
plumbers if you are not sure that there
is no water hammer effect in your
installation.
• Do not install on the hot water inlet.
Take precautions against of the
risk of freezing of the hoses. Water
temperature operating interval shall
be 33°F (0.6°C) minimum and 100°F
(38°C) maximum.
• Use drinking water only.
5 / 40 EN
Refrigerator / User Guide
Safety and environment instructions
1.2. Intended use
• This product is designed for home use.
It is not intended for commercial use.
• The product should be used to store
food and beverages only.
• Do not keep sensitive products
requiring controlled temperatures
(vaccines, heat sensitive medication,
medical supplies, etc.) in the
refrigerator.
• The manufacturer assumes no
responsibility for any damage due to
misuse or mishandling.
• Original spare parts will be provided
for 10 years, following the product
purchasing date.
1.3. Child safety
• Keep packaging materials out of
children’s reach.
• Do not allow the children to play with
the product.
• If the product’s door comprises a lock,
keep the key out of children’s reach.
1.4. Compliance with the
WEEE Directive and Disposing
of the Waste Product:
This product complies with EU WEEE Directive
(2012/19/EU). This product bears a classification
symbol for waste electrical and electronic equip-
ment (WEEE).
This symbol indicates that this product
shall not be disposed with other house-
hold wastes at the end of its service life.
Used device must be returned to offical
collection point for recycling of electrical
and electronic devices. To find these collection sys-
tems please contact to your local authorities or re-
tailer where the product was puchased. Each
household performs important role in recovering
and recycling of old appliance. Appropriate disposal
of used appliance helps prevent potential negative
consequences for the environment and human
health.
1.5. Compliance with RoHS Directive
The product you have purchased complies with EU
RoHS Directive (2011/65/EU). It does not contain
harmful and prohibited materials specified in the
Directive.
1.6. Package information
Packaging materials of the product are
manufactured from recyclable materials
in accordance with our National
Environment Regulations. Do not dis-
pose of the packaging materials together with the
domestic or other wastes. Take them to the pack-
aging material collection points designated by the
local authorities.
6 / 40 EN Refrigerator / User Guide
2 Refrigerator
C*Optional: Figures in this user guide are schematic and may not be exactly match your product. If your
product does not comprise the relevant parts, the information pertains to other models.
1- Freezer compartment
2- Cooler compartment
3- Fan
4- Butter-cheese compartment
5- Glass shelves
6- Cooler compartment door shelves
7- Minibar accessory
8- Water tank
9- Bottle shelf
10- Odour filter
11- Zero degree compartment
12- Vegetable bins
13- Adjustable stands
14- Frozen food storing compartments
15- Freezer compartment door shelves
16- Icematics
17- Ice storage box
18- Ice-maker decorative lid
*Optional
2
3*4
5*6
1
*7
*11
*16
*16
*17
*18
12
13
14
15
13
*8
10
*9
7 / 40 EN
Refrigerator / User Guide
2
1
3*4
5
*6
*7
11
11
10
13
9
8
*14
12
*14
2 Refrigerator
C*Optional: Figures in this user guide are schematic and may not be exactly match your product. If your
product does not comprise the relevant parts, the information pertains to other models.
8 / 40 EN Refrigerator / User Guide
3 Installation
3.1. Right place for installation
Contact the Authorized Service for the product's
installation. To ready the product for installation,
see the information in the user guide and make
sure the electric and water utilities are as required.
If not, call an electrician and plumber to arrange
the utilities as necessary.
BWARNING: The manufacturer assumes
no responsibility for any damage caused
by the work carried out by unauthorized
persons.
BWARNING: The product’s power cable
must be unplugged during installation.
Failure to do so may result in death or
serious injuries!
AWARNING: : If the door span is too
narrow for the product to pass, remove
the door and turn the product sideways; if
this does not work, contact the authorized
service.
•SPlacetheproductonaflatsurfacetoavoid
vibration.
•Placetheproductatleast30cmawayfromthe
heater, stove and similar sources of heat and at
least 5 cm away from electric ovens.
•Donotexposetheproducttodirectsunlightor
keep in damp environments.
•Theproductrequiresadequateaircirculationto
function efficiently. If the product will be placed
in an alcove, remember to leave at least 5 cm
distance between the product and the ceiling
and the walls.
•Donotinstalltheproductinenvironmentswith
temperatures below -5°C.
3.2. Attaching the plastic wedges
Use the plastic wedges in the provided with
the product to provide sufficient space for air
circulation between the product and the wall.
1.
To attach the wedges, remove the screws on the
product and use the screws provided with the wedges.
2.
Attach 2 plastic wedges on the ventilation cover
shown as j in the figure.
9 / 40 EN
Refrigerator / User Guide
Installation
3.3. Adjusting the stands
If the product is not in balanced position, adjust the
front adjustable stands by rotating right or left.
3.4. Power connection
AWARNING: Do not use extension or multi
sockets in power connection.
BWARNING: Damaged power cable must
be replaced by Authorized Service.
CWhen placing two coolers in adjacent
position, leave at least 4 cm distance
between the two units.
• Our firm will not assume responsibility for any
damages due to usage without earthing and
power connection in compliance with national
regulations.
• The power cable plug must be easily
accessible after installation.
• Connect the refrigerator to an earthed socket
with 220-240V/50 Hz voltage. The plug must
comprise a 10-16A fuse.
• Do not use multi-group plug with or without
extension cable between the wall socket and
the refrigerator.
In order to adjust the doors vertically,
•Loosenthefixingnutatthebottom
•Screwadjustingnut(CW/CCW)accordingtothe
position of the door
•Tightenthefixingnutforthefinalposition
In order to adjust the doors horizontally,
• Loosen the fixing bolt on the top
• Screw the adjusting bolt (CW/CCW) on the side
according to the position of the door
• Tighten the fixing bolt on the top for the final
position
adjusting nut
fixing nut
fixing nut
adjusting nut
10 / 40 EN Refrigerator / User Guide
Installation
3.5. Water connection
(Optional)
AWARNING: Unplug the product and
the water pump (if available) during
connection.
The product’s water mains, filter and carboy
connections must be rendered by authorizer
service. The product can be connected to a carboy
or directly to the water mains, depending on the
model. To establish the connection, the water hose
must first be connected to the product.
Check to see the following parts are supplied with
your product’s model:
3
1
4
2
*5
1. Connector (1 piece): Used to attach the water
hose to the rear of the product.
2. Hose clip (3 pieces): Used to fix the water
hose on the wall.
3. Water hose (1 piece, 5 meter diameter 1/4
inches): Used for the water connection.
4. Faucet adapter (1 piece): Comprises a porous
filter, used for connection to the cold water
mains.
5. Water filter (1 piece *Optional): Used to
connect the mains water to the product. Water
filter is not required if carboy connection is
available.
11 / 40 EN
Refrigerator / User Guide
Installation
1
23
3.6. Connecting water
hose to the product
To connect the water hose to the product,
follow the instructions below.
1. Remove the connector on the hose nozzle
adaptor in the back of the product and run the
hose through the connector.
2. Push the water hose down tightly and connect
to the hose nozzle adaptor.
3. Tighten the connector manually to fix on the
hose nozzle adaptor. You may also tighten the
connector using a pipe wrench or pliers.
3.7. Connecting to water mains
(Optional)
To use the product by connecting to the cold water
mains, a standard 1/2” valve connector must be
installed to the cold water mains in your home. If
the connector is not available or if you are unsure,
consult a qualified plumber.
1. Detach the connector (1) from the faucet
adaptor (2).
1
2
3
2. Connect the faucet adaptor to the water mains
valve.
3. Attach the connector around the water hose.
4. Connect the other end of the hose to the
water mains (See Section 3.7) or, to use
carboy, to the water pump (See Section 3.8).
12 / 40 EN Refrigerator / User Guide
Installation
4. Attach the connector into the faucet adaptor
and tighten by hand / tool.
2. Connect the other end of the water hose to
the water pump by pushing the hose into the
pump’s hose inlet.
5. To avoid damaging, shifting or accidentally
disconnecting the hose, use the clips provided
to fix the water hose appropriately.
AWARNING: After turning the faucet
on, make sure there is no water leak on
either end of the water hose. In case of
leakage, turn the valve off and tighten
all connections using a pipe wrench or
pliers.
3.8. For products using water carboy
(Optional)
To use a carboy for the product’s water
connection, the water pump recommended by the
authorized service must be used.
1. Connect one end of the water hose provided
with the pump to the product (see 3.6) and
follow the instructions below.
3. Place and fasten the pump hose inside the
carboy.
4. Once the connection is established, plug in
and start the water pump.
CPlease wait 2-3 minutes after starting
the pump to achieve the desired
efficiency.
CSee also the pump’s user guide for
water connection.
CWhen using carboy, water filter is not
required.
3.9 Water filter
(Optional)
The product may have internal or external filter,
depending on the model. To attach the water filter,
follow the instructions below.
13 / 40 EN
Refrigerator / User Guide
Installation
3.9.1.Fixing external filter
on the wall (Optional)
AWARNING: Do not fix the filter on the
product.
Check to see the following parts are supplied with
your product’s model:
1. Connector (1 piece): Used to attach the water
hose to the rear of the product.
2. Faucet adapter (1 piece): Used for connection
to the cold water mains.
3. Porous filter (1 piece)
4. Hose clip (3 pieces): Used to fix the water
hose on the wall.
5. Filter connecting apparatus (2 pieces): Used to
fix the filter on the wall.
6. Water filter (1 piece): Used to connect the
product to the water mains. Water filter is not
necessary when using carboy connection.
1. Connect the faucet adaptor to the water mains
valve.
2. Determine the location to fix the external filter.
Fix the filter’s connecting apparatus (5) on the
wall.
3. Attach the filter in upright position on the filter
connecting apparatus, as indicated on the
label. (6)
4. Attach the water hose extending from the top
of the filter to the product’s water connection
adaptor, (see 3.6.)
After the connection is established, it should look
like the figure below.
123
4
5
6
14 / 40 EN Refrigerator / User Guide
Installation
3.9.2.Internal filter
The internal filter provided with the product is not
installed upon delivery; please follow the instructions
below to install the filter.
1. “Ice Off” indicator must be active while
installing the filter. Switch the ON-OFF
indicator using the “Ice” button on the screen.
Water line:
Carboy line:
2. Remove the vegetable bin (a) to access the
water filter.
a
CDo not use the first 10 glasses of
water after connecting the filter.
15 / 40 EN
Refrigerator / User Guide
Installation
3. Remove the water filter by-pass cover by
pulling.
CA few drops of water may flow out
after removing the cover; this is
normal.
4. Place the water filter cover into the
mechanism and push to lock in place.
5. Push the “Ice” button on the screen again to
cancel the “Ice Off” mode.
CThe water filter will clear certain foreign
particles in the water. It will not clear the
microorganisms in the water.
CSee section 5.2 for activating the filter
replacing period.
16 / 40 EN Refrigerator / User Guide
4 Preparation
4.1. What to do for energy saving
mehmet
AConnecting the product to electronic
energy-saving systems is harmful, as it
may damage the product.
• For a freestanding appliance; ‘this refrigerating
appliance is not intended to be used as a built-
in appliance’ .
• Do not keep the refrigerator doors open for
long periods.
• Do not place hot food or beverages into the
refrigerator.
• Do not overfill the refrigerator; blocking the
internal air flow will reduce cooling capacity.
• The energy consumption value specified for
the refrigerator was measured with the freezer
compartment’s upper shelf removed, other
shelves and the lowest drawers in place and
under maximum load. The top glass shelf can
be used, depending on the shape and size of
food to be frozen.
• Depending on the product’s features;
defrosting frozen foods in the cooler
compartment will ensure energy saving and
preserve food quality.
• The baskets/drawers that are provided with the
chill compartment must always be in use for
low energy consumption and for better storage
conditions.
• Since hot and humid air will not directly
penetrate into your product when the doors
are not opened, your product will optimize
itself in conditions sufficient to protect your
food. Functions and components such as
compressor, fan, heater, defrost, lighting,
display and so on will operate according to
the needs to consume minimum energy under
these circumstances.
• Food contact with the temperature sensor in
the freezer compartment may increase energy
consumption of the appliance. Thus any
contact with the sensor(s) must be avoided.
• Make sure the foods are not in contact with
the cooler compartment temperature sensor
described below.
4.2. First Use
Before using your refrigerator, make sure the
necessary preparations are made in line with
the instructions in “Safety and environment
instructions” and “Installation” sections.
• Keep the product running with no food inside
for 6 hours and do not open the door, unless
absolutely necessary.
CA sound will be heard when the
compressor is engaged. It is normal to
hear sound even when the compressor is
inactive, due to the compressed liquids
and gasses in the cooling system.
CIt is normal for the front edges of the
refrigerator to be warm. These areas are
designed to warm up in order to prevent
condensation.
CIn some models, the indicator panel
automatically turns off 5 minutes after
the door has closed. It will be reactivated
when the door has opened or pressed on
any key.
17 / 40 EN
Refrigerator / User Guide
5 Using the product
5.1. Indicator panel
Indicator panels may vary depending on the model of your product.
Audial and visual functions of the indicator panel will assist in using the refrigerator.
8123
45
7 6
9
1.
Cooler compartment indicator
2.
Error status indicator
3.
Temperature indicator
4.
Vacation function button
5.
Temperature adjustment button
6.
Compartment selection button
7.
Freezer Compartment indicator
8.
Economy mode indicator
9.
Vacation function indicator
*optional
C*Optional: The figures in this user guide are intended as drafts and may not perfectly match your
product. If your product does not comprise the relevant parts, the information pertains to other models.
18 / 40 EN Refrigerator / User Guide
Using the product
1. Cooler compartment indicator
The cooler compartment light will turn on when
adjusting the cooler compartment temperature.
2. Error status indicator
This sensor will activate if the refrigerator is not
cooling adequately or in case of sensor fault. When
this indicator is active, the freezer compartment
temperature indicator will display "E" and the
cooler compartment temperature indicator will
display "1, 2, 3..." etc. numbers. The numbers on
the indicator serve to inform the service personnel
about the fault.
3. Temperature indicator
Indicates the temperature of the freezer and cooler
compartments.
4.Vacation function button
To activate this function, press and hold the
Vacation button for 3 seconds. When the Vacation
function is active, the cooler compartment
temperature indicator displays the inscription
"- -" and no cooling process will be active in
the cooling compartment. This function is not
suitable to keep food in the cooler compartment.
Other compartments will remain cooled with the
respective temperature set for each compartment.
Push the Vacation button ( ) again to cancel
this function.
5. Temperature adjustment button
Respective compartment's temperature varies in
-24°C..... -18°C and 8°C...1°C ranges.
6. Compartment selection button
Use the refrigerator compartment selection
button to toggle between the cooler and freezer
compartments.
7. Freezer Compartment indicator
The freezer compartment light will turn on when
adjusting the cooler compartment temperature.
8. Economy mode indicator
Indicates the refrigerator is running on energy-
saving mode. This indicator will be active when
the temperature in the freezer compartment is set
to -18°C.
9.Vacation function indicator
Indicates the vacation function is active.
1
2
3
4
5
6
7
8
9
Eco Mode
Yellow: Vacation
Display On after any interaction with buttons
interaction with product/
19 / 40 EN
Refrigerator / User Guide
Using the product
1
2
3
4
5
6
7
8
9
Eco Mode
Yellow: Vacation
Display On after any interaction with buttons
interaction with product/
C*Optional: The figures in this user guide are intended as drafts and may not perfectly match your
product. If your product does not comprise the relevant parts, the information pertains to other models.
20 / 40 EN Refrigerator / User Guide
Using the product
1- Power failure/High temperature / error
warning
2- Freezer compartment temperature setting
3- Quick freeze
4- Key lock
5- Vacation function
6- Quick Fridge
7- Fridge compartment temperature setting
8- Eco fuzzy
9- Alarm off warning
• High temperature alarm :RED (1 Hz flash)
• Within 1 min. after the door is opened
(when the door: open alarm is enabled) RED light
becomes on.
• When the door is opened : WHITE
• Eco Mode : GREEN
• Quick Freeze : BLUE
• Quick Fridge : BLUE
• Vacation : YELLOW
• Display Off : GREEN
• After the door is closed, if one of the
WHITE / Eco Mode, Quick Freeze, Quick
Fridge, Vacation modes are active, the colour
of these modes are displayed for 1 min. (The
colour of the mode is more dominant than
that of the display status).
1. Power failure/High temperature / error
warning
This indicator illuminates during power failure, high
temperature failures and error warnings. During
long-term power failures, the highest temperature
value that the freezer compartment reaches will
blink on the digital display. After checking the food
located in the freezer compartment, press the
alarm off button to clear the warning.
Please refer to "solutions recommended for
troubleshooting" section on your manual if you
observe that this indicator is illuminated.
2. Freezer compartment temperature setting
Temperature setting is made for freezer
compartment. When this button is pressed,
you can set the temperature of the freezer
compartment to -18, -19, -20, -21, -22, -23 and
-24.
3. Quick freeze
Press this button for quick freeze operation, the
quick freeze indicator ( ) will be activated.
Quick freeze indicator is lit when quick freeze
function is on and fridge compartment temperature
indicator displays -27. To cancel this function
press the quick freeze button ( ) again. Quick
freeze indicator will turn off and refrigerator will
reset to its normal settings. Quick freeze function
is cancelled automatically in 24 hour if you do not
cancel it. If you want to freeze large amounts of
fresh food, press the quick freeze button before
putting the food into the freezer compartment.
4. Key lock
Press and hold the alarm off button for 3 seconds.
The key lock symbol will be on and key lock will
be activated; When the Key Lock is on, the buttons
are disabled. Press and hold the alarm off button
for 3 seconds again. The key lock symbol will be
off and the key lock mode will be disabled.
5. Vacation function
In order to activate the vacation function, press and
hold the fuzzy button for 3 seconds; the vacation
mode indicator ( ) will be activated. When the
vacation function is activated, "- -" is displayed on
the fridge compartment temperature indicator and
no active cooling operation will be performed on
the fridge compartment. It is not suitable to keep
the food in the fridge compartment in this function.
Other compartments will continue to be cooled
according to their set temperatures.
21 / 40 EN
Refrigerator / User Guide
Using the product
To cancel this function, press the Vacation
function button again.
6.Quick fridge
Quick fridge indicator is lit ( ) and the fridge
compartment temperature indicator value is displayed
as 1 when the quick fridge function is activated. To
cancel this function, press the Quick fridge button
again. Quick fridge indicator will be off and the
refrigerator will be reset to its normal settings. Quick
fridge function is cancelled automatically in 1 hour if
you do not cancel it. If you want to cool large amounts
of fresh food, press the Quick fridge button before
putting the food into the fridge compartment.
7. Fridge compartment temperature setting
When this button is pressed the fridge
compartment temperature can be set to
8,7,6,5,4,3,2 and 1 values.
8. Eco fuzzy
Press and hold the eco fuzzy button for 1 seconds
to activate the eco fuzzy function. Refrigerator will
start operating in the most economic mode at least
6 hours later and the economic usage indicator
will be on ( ). Press and hold the eco fuzzy
function button for 3 seconds to disable the eco
fuzzy function.
This indicator will be on after 6 hours when eco
fuzzy is activated.
9. Alarm off warning
In case of power failure/high temperature
alarm, after checking the foods in the freezer
compartment, press the alarm off button to clear
the warning.
22 / 40 EN Refrigerator / User Guide
Using the product
C*Optional: The figures in this user guide are intended as drafts and may not perfectly match
your product. If your product does not comprise the relevant parts, the information pertains
to other models.
*1
1 *2
23
4
56
7.1 7.2
8910
11
*3
4
(*)
13
12
5
6
78
9
1011.1
11.2
1. Economic use
2- High temperature / fault alert
3. Energy saving function (display off)
4- Rapid cooling
5- Vacation function
6- Cooler compartment temperature setting
7. Energy saving (display off) /Alarm off
8- Keypad lock
9- Eco-fuzzy
10- Freezer compartment temperature setting
11- Rapid freezing
23 / 40 EN
Refrigerator / User Guide
Using the product
1. Economic use
This sign will light up when the freezer
compartment is set to -18°C', the most
economical setting. ( ) Economic use indicator
will turn off when rapid cooling or rapid freezing
function is selected.
2. Power failure/High temperature / error
warning indicator
This indicator ( ) will light up in case of
temperature faults or fault alerts. If you see this
indicator is lit up, please see the "recommended
solutions for problems" section in this guide.
This indicator illuminates during power failure, high
temperature failures and error warnings. During
sustained power failures, the highest temperature
that the freezer compartment reaches will flash on
the digital display. After checking the food located
in the freezer compartment press the alarm off
button to clear the warning.
Please refer to “remedies advised for
troubleshooting” section on your manual if you
observe that this indicator is illuminated.
3. Energy saving function (display off)
If the product doors are kept closed for a long time
energy saving function is automatically activated
and energy saving symbol is illuminated. When
energy saving function is activated, all symbols
on the display other than energy saving symbol
will turn off. When the Energy Saving function is
activated, if any button is pressed or the door is
opened, energy saving function will be cancelled
and the symbols on display will return to normal.
Energy saving function is activated during delivery
from factory and cannot be cancelled.
4. Rapid cooling
When the rapid cooling function is turned on, the
rapid cool indicator will light up ( ) and the cooler
compartment temperature indicator will display
the value 1. Push the Rapid cool button again to
cancel this function. The Rapid cool indicator will
turn off and return to normal setting. The rapid
cooling function will be automatically cancelled
after 1 hour, unless cancelled by the user. Too
cool a large amount of fresh food, press the rapid
cool button before placing the food in the cooler
compartment.
5. Vacation function
To activate the Vacation function, , press the quick
fridge button for 3 seconds; this will activate the
vacation mode indicator ( ). When the Vacation
function is active, the cooler compartment
temperature indicator displays the inscription
"- -" and no cooling process will be active in
the cooling compartment. This function is not
suitable to keep food in the cooler compartment.
Other compartments will remain cooled with the
respective temperature set for each compartment.
Push the vacation function button again to cancel
this function.
6. Cooler compartment temperature setting
After pressing the button , the cooler compartment
temperature can be set to 8,7,6,5,4,3,2 and 1
respectively.( )
7. 1 Energy saving (display off)
Pressing this button ( ) will light up the energy-
saving sign ( ) and the Energy-saving function
will activate. Activating the energy-saving function
will turn off all other signs on the display. When
the energy-saving function is active, pressing any
button or opening the door will deactivate the
energy-saving function and the display signals will
return to normal. Pressing this button ( ) again
will turn off the energy-saving sign and deactivate
the energy-saving function.
7.2 Alarm off
In case of power failure/high temperature alarm,
after checking the food located in the freezer
compartment press the alarm off button to clear
the warning.
8. Keypad lock
Press the display off button, simultaneously for 3
seconds. The keypad lock sign will light up and the
keypad lock will be activated; the buttons will be
inactive when the Keypad lock is activated. Press
the Display off button again simultaneously for 3
seconds. The keypad lock sign will turn off and
24 / 40 EN Refrigerator / User Guide
Using the product
the keypad lock mode will be disengaged. Press
the Display off button to prevent changingthe
refrigerator’s tempeture settings.
9. Eco-fuzzy
To activate the eco-fuzzy function, press and hold
the eco-fuzzy button for 1 second. When this
function is active, the freezer will switch to the
economic mode after at least 6 hours and the
economic use indicator will light up. To deactivate
the ( ) eco-fuzzy function, press and hold the
eco-fuzzy function button for 3 seconds.
The indicator will light up after 6 hours when the
eco-fuzzy function is active.
10. Freezer compartment temperature setting
The temperature in the freezer compartment is
adjustable. Pressing the button will enable the
freezer compartment temperature to be set at
-18,-19, -20, -21, -22, -23 and -24.
11. Rapid freezing
For rapid freezing, press the button ; this will
activate the rapid freezing indicator ( ).
When the rapid freezing function is turned on, the
rapid freeze indicator will light up and the freezer
compartment temperature indicator will display the
value -27. Press the Rapid freeze button ( ) again
to cancel this function.The Rapid freeze indicator
will turn off and return to normal setting.
The rapid freezing function will be automatically
cancelled after 24 hours, unless cancelled by the
user. To freeze a large amount of fresh food, press
the rapid freeze button 6 hours before placing the
food in the freezer compartment.
25 / 40 EN
Refrigerator / User Guide
Using the product
C*Optional: The figures in this user guide are intended as drafts and may not perfectly match
your product. If your product does not comprise the relevant parts, the information pertains
to other models.
*1
1 *2
23
4
56
7.1 7.2
8910
11
*3
4
(*)
13
12
5
6
78
9
1011.1
11.2
1. Freezer compartment temperature setting
2. Economy mode
3. Energy saving function (display off)
4. Power failure/High temperature / error
warning indicator
5. Cooler compartment temperature setting
6. Rapid cooling
7. Vacation function
8. Keypad lock / filter replacing alert cancellation
9. Water, fragmented ice, ice cubes selection
10. Ice making on/off
11. Display on/off/Alarm off
12. Autoeco
13. Rapid freezing
26 / 40 EN Refrigerator / User Guide
Using the product
1. Freezer compartment temperature setting
Pressing the button ( ) will enable the freezer
compartment temperature to be set at -18,-19,-
20,-21 ,-22,-23,-24,-18...
2. Economy mode
Indicates the refrigerator is running on energy-
saving mode. This indicator will be active when the
freezer compartment temperature is set at -18 or
the energy-saving cooling is engaged by eco-extra
function. ( )
3.Energy saving function (display off)
If the product doors are kept closed for a long time
energy saving function is automatically activated
and energy saving symbol is illuminated. When
energy saving function is activated, all symbols
on the display other than energy saving symbol
will turn off. When the Energy Saving function is
activated, if any button is pressed or the door is
opened, energy saving function will be cancelled
and the symbols on display will return to normal.
Energy saving function is activated during delivery
from factory and cannot be cancelled.
4. Power failure/High temperature / error
warning indicator
This indicator ( ) will light up in case of
temperature faults or fault alerts. If you see this
indicator is lit up, please see the "recommended
solutions for problems" section in this guide.
This indicator illuminates during power failure, high
temperature failures and error warnings. During
sustained power failures, the highest temperature
that the freezer compartment reaches will flash on
the digital display. After checking the food located
in the freezer compartment press the alarm off
button to clear the warning.
Please refer to "remedies advised for
troubleshooting" section on your manual if you
observe that this indicator is illuminated.
5. Cooler compartment temperature setting
After pressing the button ( ), the cooler
compartment temperature can be set to
8,7,6,5,4,3,2.. respectively.
6. Rapid cooling
For rapid cooling , press the button; this will
activate the rapid cooling indicator ( ).
Press this button again to deactivate this function.
Use this function when placing fresh foods into
the cooler compartment or to rapidly cool the
food items. When this function is activated, the
refrigerator will be engaged for 1 hour.
7. Vacation function
When the Vacation function ( ) is active, the
cooler compartment temperature indicator displays
the inscription "- -" and no cooling process
will be active in the cooling compartment. This
function is not suitable to keep food in the cooler
compartment. Other compartments will remain
cooled with the respective temperature set for
each compartment.
Press the vacation function button again to cancel
this function. ( )
8. Keypad lock / Keypad lock / filter replacing
alert cancellation
Press keypad lock button ( ) to activate the
keypad lock. You may also use this function to
prevent changing the refrigerator's temperature
settings. The refrigerator's filter must be replaced
every 6 months. If you follow the instructions in
the section 5.2, the refrigerator will automatically
calculate the remaining period and the filter
replacing alert indicator ( ) will light up when
filter expires.
Press and hold the button ( ) for 3 seconds to
turn off the filter alert light.
9. Water, fragmented ice, ice cubes selection
Navigate the water ( ), ice cube ( ) and
fragmented ice ( ) selections using the button
number 8. The active indicator will remain lit.
10. Ice making on/off
Press the button ( ) to cancel ( ) or
activate ( ) ice-making.
11.1 Display on/off
When you press the Display off button and when the (
) function is lit, all the other icons of the
27 / 40 EN
Refrigerator / User Guide
Using the product
display will go off and the display will enter the energy
saving mode. When you press the Display off button
again and when the( ) function is lit, all
the other icons of the display will be lit and the display
will exit the energy saving mode.
11.2 Alarm off warning
In case of power failure/high temperature alarm,
after checking the food located in the freezer
compartment press the alarm off button to clear
the warning.
12. Autoeco
Press the auto eco button ( ), for 3 seconds to
activate this function. If the door remains closed
for a long time when this function is activated, the
cooler section will switch to economic mode. Press
the button again to deactivate this function.
The indicator will light up after 6 hours when the
auto eco function is active. ( )
13. Rapid freezing
For rapid freezing, press the button ; this will
activate the rapid freezing indicator ( ).
When the rapid freezing function is turned on, the
rapid freeze indicator will light up and the freezer
compartment temperature indicator will display the
value -27. Press the Rapid freeze button
() again to cancel this function.The Rapid freeze
indicator will turn off and return to normal setting.
The rapid freezing function will be automatically
cancelled after 24 hours, unless cancelled by the
user. To freeze a large amount of fresh food, press
the rapid freeze button 6 hours before placing the
food in the freezer compartment.
28 / 40 EN Refrigerator / User Guide
Using the product
5.2. Activating water filter
change warning
(For products connected to the mains water
line and equipped with filter)
Water filter change warning is activated as follows:
Freezer Set Fridge Set
Quick Fridge
Alarm Off Ice On/Off Dispenser
Mode
When the Key Lock
Filter reset
Vacation
Quick Freeze/
(Eco Fuzzy)
*(pressing 3 seconds)
After energising, press Alarm Off and Vacation buttons for 3 seconds to enter the password entry screen.
Password
Screen
(3 sec.)
Automatic filter usage time calculation is not enabled ex factory.
It must be enabled in products equipped with a filter.
The S4 display board we use in the refrigerator has a nine-key system.
Set values are shown in the display.
29 / 40 EN
Refrigerator / User Guide
Using the product
Press twice
Press once
“Upon seeing PS 0 screen, de-energise the refrigerator and energise it again. This way, the filter counter
will be activated. The filter warning LED will be active on the display in 130 days. After replacing the filter
with a new one, press the Key Lock button for 3 seconds to make the filter counter to count down from
130 days.
Repeat the steps given above to cancel this function.”
Filter warning light
Press for 3 seconds while
the filter warning LED is ac-
tive to reset the filter time.
30 / 40 EN Refrigerator / User Guide
Using the product
5.4. Using the water fountain
(for certain models)
CThe first few glasses of water taken from
the fountain will normally be warm.
CIf the water fountain is not used for a long
time, dispose of the first few glasses of
water to get clean water.
You must wait approximately 12 hours to get cold
water after first operating.
Use the display to select the water option, then pull
the trigger to get water. Remove the glass shortly
after pulling the trigger.
5.5. Filling the fountain water tank
Open the water tank’s lid, as shown in the figure.
Fill in pure and clean drinking water. Close the lid.
5.3. Humidity controlled crisper
(FreSHelf)
(This feature is optional)
Humidity rates of the vegetables and fruit are
kept under control with the feature of humidity-
controlled crisper and the food is ensured to stay
fresh for longer.
We recommend you to place the leafy vegetables
such as lettuce, spinach and the vegetables which
are sensitive to humidity loss, in a horizontal
manner as much as possible inside the crisper, not
on their roots in a vertical position.
While the vegetables are being placed, specific
gravity of the vegetables should be taken into
consideration. Heavy and hard vegetables should
be put at the bottom of the crisper and the
lightweight and soft vegetables should be placed
over.
Never leave the vegetables inside the crisper
in their bags. If the vegetables are left inside
their bags, this will cause them to decompose
in a short period of time. In case contacting with
other vegetables is not preferred for hygiene
concerns, use a perforated paper and other similar
packaging materials instead of a bag.
Do not place together the pear, apricot, peach,
etc. and apple in particular which have a high level
of generation of ethylene gas in the same crisper
with the other vegetables and fruit. The ethylene
gas which is emitted by these fruit may cause
the other fruit to ripen faster and decompose in a
shorter time.
31 / 40 EN
Refrigerator / User Guide
Using the product
5.6. Cleaning the water tank
Remove the water filling reservoir inside the door
shelf.
Detach by holding both sides of the door
shelf.
Hold both sides of the water tank and remove at
45° angle.
Remove and clean the water tank lid.
A
Do not fill the water tank with fruit juice,
fizzy beverages, alcoholic beverages or
any other liquids incompatible for use in
the water fountain. Using such liquids
will cause malfunction and irreparable
damage in the water fountain. Using
the fountain in this way is not within the
scope of warranty. Such certain chemicals
and additives in the beverages / liquids
may cause material damage to the water
tank.
AThe water tank and water fountain
components cannot be washed with
dishwashers.
32 / 40 EN Refrigerator / User Guide
Using the product
5.7. Taking ice / water
(Optional)
To take water ( ) / ice cube ( ) / fragmented
ice ( ), use the display to select the respective
option. Take water/ice by pushing the trigger
on the water fountain forward. When switching
between ice cube ( ) / fragmented ice ( )
options, the previous ice type may be discharged a
few more times.
• You must wait approximately 12 hours before
taking ice from the ice / water fountain for the
first time. The fountain may not discharge ice if
there is insufficient ice in the ice box.
• The 30 pieces of ice cubes (3-4 Litres) taken
after first operating should not be used.
• In case of power blackout or temporary
malfunction, the ice may partly melt and re-
freeze. This will cause the ice pieces to merge
with each other. In case of extended power
blackouts or malfunction, the ice may melt
and leak out. If you experience this problem,
remove the ice in the ice box and clean the
box.
AWARNING: The product’s water system
should be connected to cold water line
only. Do not connect to hot water line.
• The product may not discharge water during
first operation. This is caused by the air in
the system. The air in the system must be
discharged. To do this, push the water fountain
trigger for 1-2 minutes until the fountain
discharges water. The initial water flow may be
irregular. The water will flow normally once the
air in the system is discharged.
• The water may be cloudy during first use of
the filter; do not consume the first 10 glasses
of water.
• You must wait approximately 12 hours to get
cold water after first installation.
• The product’s water system is designed
for clean water only. Do not use any other
beverages.
• It is recommended to disconnect the water
supply if the product will not be used for long
periods during vacation etc.
• If the water fountain is not used for a long
time, the first 1-2 glasses of water received
may be warm.
5.8. Drip tray
(optional)
The water dripping from the water fountain
accumulates on the drip tray; no water drainage is
available. Pull the drip tray out or push on the edges
to remove the tray. You may then discharge the water
inside the drip tray.
33 / 40 EN
Refrigerator / User Guide
Using the product
5.9. Zero degree compartment
(Optional)
Use this compartment to keep delicatessen
at lower temperatures or meat products for
immediate consumption. Do not place fruits and
vegetables in this compartment. You can expand
the product's internal volume by removing any
of the zero degree compartments. To remove the
compartment, simply pull forth, lift up and pull out.
5.10. Vegetable bin
The refrigerator's vegetable bin is designed to
keep vegetables fresh by preserving humidity.
For this purpose, the overall cold air circulation is
intensified in the vegetable bin. Keep fruits and
vegetables in this compartment. Keep the green-
leaved vegetables and fruits separately to prolong
their life.
5.11. Ionizer
(Optional)
The ionizer system in the cooler compartment's
air duct serves to ionize the air. The negative
ion emissions will eliminate bacteria and other
molecules causing odour in the air.
5.12. Minibar
(Optional)
The refrigerator's minibar door shelf can be
accessed without opening the door. This will
allow you to easily take frequently consumed
food and beverages from the refrigerator. To open
the minibar cover, push with your hand and pull
towards yourself.
AWARNING: Do not sit, hang or place
heavy objects on the minibar cover. This
may damage the product or cause you to
be injured.
To close this compartment, simply push forward
from the upper section of the cover.
5.13. Odour filter
(optional)
The odour filter in the cooler compartment's air
duct will prevent undesirable odour formation.
5.14. Blue light/HarvestFresh
*May not be available in all models
For the blue light,
Fruits and vegetables stored in the crispers that
are illuminated with a blue light continue their
photosynthesis by means of the wavelength
effect of blue light and thus preserve their vitamin
content.
ForHarvestFresh,
Fruits and vegetables stored in crispers illuminated
with the HarvestFresh technology preserve their
vitamins for a longer time thanks to the blue,
green, red lights and dark cycles, which simulate
a day cycle.
If you open the door of the refrigerator during
the dark period of the HarvestFresh technology,
the refrigerator will automatically detect this and
enable the blue-green or red light to illuminate
the crisper for your convenience. After you have
closed the door of the refrigerator, the dark period
will continue, representing the night time in a day
cycle.
34 / 40 EN Refrigerator / User Guide
Using the product
5.15. Icematic and ice storage box
(Optional)
Fill the icematic with water and put in place.
The ice will be ready after approximately two
hours. Do not remove the icematic to take the
ice.
Turn the buttons on the ice chambers right-
hand side by 90°; the ice will fall to the ice sto-
rage box below. You may then remove the ice
storage box and serve the ice.
CThe ice storage box is intended for
storing ice only. Do not fill with water.
Doing so will cause it to break.
5.16. Ice-maker
(Optional)
Ice maker is located on the upper section of the
freezer cover.
Hold the handles on the sides of the ice stock
reservoir and move up to remove.
Remove the ice-maker decorative lid by moving
up.
OPERATION
To remove the ice reservoir
Hold the ice stock reservoir from the handles, then
move up and pull the ice stock reservoir. (Figure 1)
To reinstall the ice reservoir
Hold the ice stock reservoir from the handles, move up
with an angle to fit the sides of the reservoir to their
slot and make sure that the ice selector pin is mounted
properly. (Figure 2)
Push downwards firmly, until there is no space left
between the reservoir and the door plastic. (Figure 2)
If you have difficulty in refitting the reservoir, turn the
rotary gear 90° and reinstall it as shown in the figure3.
Any sound you hear when the ice drops into the
reservoir is a part of normal operation.
35 / 40 EN
Refrigerator / User Guide
Using the product
When the ice dispenser does not work
properly
If you do not remove ice cubes for a long time, they
will cause formation of ice chunks. In this case, please
remove the ice stock reservoir in accordance with the
instructions given above, seperate the ice chunks,
discard the inseparable ice and put the ice cubes back
into the ice stock reservoir. (Figure 4)
When ice does not come out, check for any ice stuck
in the canal and remove it. Regularly check the ice
canal to clear the obstacles as shown in the figure 5.
When using your refrigerator for the first time or when
not using it for an extended period of time Ice cubes
may be small due to air in the pipe after connection,
any air will be purged during normal use.
Discard the ice produced for approximately one day
since the water pipe may contain the contaminants.
Caution!
Do not insert the hand or any other object into the ice
canal and blade since it may damage the parts or hurt
the hand.
Do not let the children hang on the ice dispenser or the
ice maker since it may cause an injury
To prevent dropping the ice stock reservoir use both
hands when removing it.
If you close the door hard, it may cause water spilling
over the ice stock reservoir.
Do not dismount the ice stock reservoir unless it is
necessary.
If there is a lockout (ice does not come from
the refrigerator) while taking broken ice, try
to take cubed ice.
Then it will be suitable for taking broken ice
again.
While taking broken Ice, cubed ice may
come first. There is a case of coming cubed
ice while taking broken ice.
Freezer door on front of the ice machine can
create a light snow and film layer.
This is normal, it is recommended to clean
without waiting for a long time.
36 / 40 EN Refrigerator / User Guide
Using the product
5.17. Freezing fresh food
• To preserve food quality, the food items placed
in the freezer compartment must be frozen as
quickly as possible, use the rapid freezing for
this.
• To freeze a large amount of fresh food, press
the rapid freeze button 6 hours before placing
the food in the freezer compartment.
• Freezing the food items when fresh will extend
the storage time in the freezer compartment.
• Pack the food items in air-tight packs and seal
tightly.
• Make sure the food items are packed before
putting in the freezer. Use freezer holders,
tinfoil and damp-proof paper, plastic bag
or similar packaging materials instead of
traditional packaging paper.
• Mark each food pack by writing the date on
the package before freezing.This will allow you
to determine the freshness of each pack every
time the freezer is opened. Keep the earlier
food items in the front to ensure they are used
first.
• Frozen food items must be used immediately
after defrosting and should not be frozen again.
• Do not free large quantities of food at once.
Freezer
Compartment
Setting
Cooler
Compartment
Setting Descriptions
-18°C 4°C This is the default, recommended setting.
-20,-22 or
-24°C 4°C These settings are recommended for ambient temperatures
exceeding 30°C.
Rapid Freeze 4°C Press Rapid Freeze function 6 hours before placing the food,
the product will reset to previous settings when the process is
completed.
-18°C or colder 2°C Use these settings if you believe the cooler compartment is not cold
enough due to ambient temperature or frequently opening the door.
The water is filled with water over time in
the lower zone of the water dispenser. It
is recommended to clean the water within
this zone periodically.
While the ice falls from the ice storage
reservoir, the sound is normal and does not
indicate that the product is problematic.
The blade mechanism inside the ice bank is
sharp and can cut your hand.
If the ice dispenser does not provide ice, the
ice may be stuck together, remove the tank
and clean it again.
Ice type cannot be changed on the display when the
ice trigger is pressed to obtain ice. Release the trigger,
change the ice type on the display and obtain ice
again.
37 / 40 EN
Refrigerator / User Guide
Using the product
5.18. Recommendations for
storing frozen foods
The compartment must be set to at least -18°C.
1. Place the food items in the freezer as quickly
as possible to avoid defrosting.
2. Before freezing, check the “Expiry Date” on
the package to make sure it is not expired.
3. Make sure the food’s packaging is not
damaged.
5.19. Deep freezer details
As per the IEC 62552 standards, the freezer must
have the capacity to freeze 4,5 kg of food items at
-18°C or lower temperatures in 24 hours for each
100 litres of freezer compartment volume. Food
items can only be preserved for extended periods
at or below temperature of -18°C . You can keep
the foods fresh for months (in deep freezer at or
below temperatures of 18°C ).
The food items to be frozen must not contact
the already-frozen food inside to avoid partial
defrosting.
Boil the vegetables and filter the water to extend
the frozen storage time. Place the food in air-tight
packages after filtering and place in the freezer.
Bananas, tomatoes, lettuce, celery, boiled eggs,
potatoes and similar food items should not be
frozen. Freezing these food items will simply
reduce the nutritional value and food quality,
as well as possible spoiling which is harmful to
health.
5.20. Placing the food
Freezer
compartment
shelves
Various frozen goods including
meat, fish, ice cream,
vegetables etc.
Cooler
compartment
shelves
Food items inside pots, capped
plate and capped cases, eggs
(in capped case)
Cooler
compartment
door shelves
Small and packed food or
beverages
Vegetable bin Fruits and vegetables
Fresh food
compartment
Delicatessen (breakfast food,
meat products to be consumed
in short notice)
5.21. Door open alert
(Optional)
An audible alert will be heard if the product's door
remains open for 1 minute. The audible alert will
stop when the door is closed or any button on the
display (if available) is pressed.
5.22. Interior light
Interior light uses a LED type lamp. Contact the
authorized service for any problems with this lamp.
The lamp(s) used in this appliance is not suitable
for household room illumination. The intended
purpose of this lamp is to assist the user to place
foodstuffs in the refrigerator/freezer in a safe and
comfortable way.
38 / 40 EN Refrigerator / User Guide
6 Maintenance and cleaning
Cleaning your fridge at regular intervals will ex-
tend the service life of the product.
B WARNING:
Unplug the product before cleaning it.
• Never use gasolne, benzene or
smlar substances for cleanng
purposes.
• Never use any sharp and abrasve
tools, soap, household cleaners,
detergent and wax polsh for
cleanng.
• For non-No Frost products,
water drops and frostng up to a
fngerbreadth occur on the rear wall
of the Frdge compartment. Do not
clean t; never apply ol or smlar
agents on t.
• Only use slghtly damp mcrofber
cloths to clean the outer surface of
the product. Sponges and other types
of cleanng cloths may scratch the
surface
• Dssolve one teaspoon of b-
carbonate n half ltre of water. Soak
a cloth wth the soluton and wrung
t thoroughly. Wpe the nteror of the
refrgerator wth ths cloth and the
dry thoroughly.
• Make sure that no water enters the
lamp housng and other electrcal
tems.
• If you wll not use the refrgerator
for a long perod of tme, unplug t,
remove all food nsde, clean t and
leave the door ajar.
• Check regularly that the door gaskets
are clean. If not, clean them.
• To remove door and body shelves,
remove all of ts contents.
• Remove the door shelves by pullng
them up. After cleanng, slde them
from top to bottom to nstall.
• Never use cleanng agents or water
that contan chlorne to clean the
outer surfaces and chromum coated
parts of the product. Chlorne causes
corroson on such metal surfaces.
6.1 Avoiding bad odours
• Materals that may cause odour
are not used n the producton of
our refrgerators. However, due
to napproprate food preservng
condtons and not cleanng the nner
surface of the refrgerator as requred
can brng forth the problem of odour.
Pay attenton to followng to avod
ths problem:
• Keepng the refrgerator clean s
mportant. Food resduals, stans, etc.
can cause odour. Therefore, clean
the refrgerator wth b-carbonate
dssolved n water every few months.
Never use detergents or soap.
• Keep the food n closed contaners.
Mcroorgansms spreadng out from
uncovered contaners can cause
unpleasant odours.
• Never keep the food that have passed
best before dates and spoled n the
refrgerator.
6.2 Protecting the plastic surfaces
Do not put liquid oils or oil-cooked meals in your
refrigerator in unsealed containers as they dama-
ge the plastic surfaces of the refrigerator. If oil is
spilled or smeared onto the plastic surfaces, clean
and rinse the relevant part of the surface at once
with warm water.
39 / 40 EN
Refrigerator / User Guide
7. Troubleshooting
Check this list before contacting the service.
Doing so will save you time and money. This list
includes frequent complaints that are not related to
faulty workmanship or materials. Certain features
mentioned herein may not apply to your product.
The refrigerator is not working.
• The power plug is not fully settled. >>> Plug it in
to settle completely into the socket.
• The fuse connected to the socket powering the
product or the main fuse is blown. >>> Check
the fuses.
Condensation on the side wall of the cooler
compartment (MULTI ZONE, COOL, CONTROL
and FLEXI ZONE).
• The door is opened too frequently >>>
Take care not to open the product’s door too
frequently.
• The environment is too humid. >>> Do not
install the product in humid environments.
• Foods containing liquids are kept in unsealed
holders. >>> Keep the foods containing liquids
in sealed holders.
• The product’s door is left open. >>> Do not
keep the product’s door open for long periods.
• The thermostat is set to too low temperature.
>>> Set the thermostat to appropriate
temperature.
Compressor is not working.
• In case of sudden power failure or pulling the
power plug off and putting back on, the gas
pressure in the product’s cooling system is
not balanced, which triggers the compressor
thermic safeguard. The product will restart after
approximately 6 minutes. If the product does not
restart after this period, contact the service.
• Defrosting is active. >>> This is normal for a
fully-automatic defrosting product. The defrosting
is carried out periodically.
• The product is not plugged in. >>> Make sure
the power cord is plugged in.
• The temperature setting is incorrect. >>> Select
the appropriate temperature setting.
• The power is out. >>> The product will continue
to operate normally once the power is restored.
The refrigerator’s operating noise is
increasing while in use.
• The product’s operating performance may
vary depending on the ambient temperature
variations. This is normal and not a malfunction.
The refrigerator runs too often or for too
long.
• The new product may be larger than the
previous one. Larger products will run for longer
periods.
• The room temperature may be high. >>> The
product will normally run for long periods in
higher room temperature.
• The product may have been recently plugged
in or a new food item is placed inside. >>>
The product will take longer to reach the set
temperature when recently plugged in or a new
food item is placed inside. This is normal.
• Large quantities of hot food may have been
recently placed into the product. >>> Do not
place hot food into the product.
• The doors were opened frequently or kept open
for long periods. >>> The warm air moving
inside will cause the product to run longer. Do
not open the doors too frequently.
• The freezer or cooler door may be ajar. >>>
Check that the doors are fully closed.
• The product may be set to temperature too low.
>>> Set the temperature to a higher degree
and wait for the product to reach the adjusted
temperature.
• The cooler or freezer door washer may be
dirty, worn out, broken or not properly settled.
>>> Clean or replace the washer. Damaged
/ torn door washer will cause the product to
run for longer periods to preserve the current
temperature.
The freezer temperature is very low, but the
cooler temperature is adequate.
• The freezer compartment temperature is set
to a very low degree. >>> Set the freezer
compartment temperature to a higher degree
and check again.
The cooler temperature is very low, but the
freezer temperature is adequate.
• The cooler compartment temperature is set
to a very low degree. >>> Set the freezer
compartment temperature to a higher degree
and check again.
40 / 40 EN Refrigerator / User Guide
Troubleshooting
The food items kept in cooler compartment
drawers are frozen.
• The cooler compartment temperature is set
to a very low degree. >>> Set the freezer
compartment temperature to a higher degree
and check again.
The temperature in the cooler or the freezer is
too high.
• The cooler compartment temperature is set to
a very high degree. >>> Temperature setting
of the cooler compartment has an effect on the
temperature in the freezer compartment. Wait
until the temperature of relevant parts reach the
sufficient level by changing the temperature of
cooler or freezer compartments.
• The doors were opened frequently or kept open
for long periods. >>> Do not open the doors too
frequently.
• The door may be ajar. >>> Fully close the door.
• The product may have been recently plugged in
or a new food item is placed inside. >>> This is
normal. The product will take longer to reach the
set temperature when recently plugged in or a
new food item is placed inside.
• Large quantities of hot food may have been
recently placed into the product. >>> Do not
place hot food into the product.
Shaking or noise.
• The ground is not level or durable. >>> If the
product is shaking when moved slowly, adjust
the stands to balance the product. Also make
sure the ground is sufficiently durable to bear the
product.
• Any items placed on the product may cause
noise. >>> Remove any items placed on the
product.
The product is making noise of liquid flowing,
spraying etc.
• The product’s operating principles involve liquid
and gas flows. >>> This is normal and not a
malfunction.
There is sound of wind blowing coming from
the product.
• The product uses a fan for the cooling process.
This is normal and not a malfunction.
There is condensation on the product’s
internal walls.
• Hot or humid weather will increase icing and
condensation. This is normal and not a malfunction.
• The doors were opened frequently or kept open
for long periods. >>> Do not open the doors too
frequently; if open, close the door.
• The door may be ajar. >>> Fully close the door.
There is condensation on the product’s exterior
or between the doors.
• The ambient weather may be humid, this is quite
normal in humid weather. >>> The condensation
will dissipate when the humidity is reduced.
The interior smells bad.
• The product is not cleaned regularly. >>> Clean
the interior regularly using sponge, warm water and
carbonated water.
• Certain holders and packaging materials may cause
odour. >>> Use holders and packaging materials
without free of odour.
• The foods were placed in unsealed holders. >>>
Keep the foods in sealed holders. Micro-organisms
may spread out of unsealed food items and cause
malodour. Remove any expired or spoilt foods from
the product.
The door is not closing.
• Food packages may be blocking the door. >>>
Relocate any items blocking the doors.
• The product is not standing in full upright position
on the ground. >>> Adjust the stands to balance
the product.
• The ground is not level or durable. >>> Make sure
the ground is level and sufficiently durable to bear
the product.
The vegetable bin is jammed.
• The food items may be in contact with the upper
section of the drawer. >>> Reorganize the food
items in the drawer.
If The Surface Of The Product Is Hot.
• High temperatures may be observed between the
two doors, on the side panels and at the rear grill
while the product is operating. This is normal and
does not require service maintenance!Be careful
when touching these areas.
A WARNING:
If the problem persists after following the instructions
in this section, contact your vendor or an Authorised
Service. Do not try to repair the product.
Drogi kliencie,
Chcemy, abyś mógł uzyskać optymalną efektywność naszego produktu, który został wyprodukowany w
nowoczesnym zakładzie i przy drobiazgowej kontroli jakości.
W tym celu prosimy przeczytać całą instrukcję obsługi przed użyciem produktu i przechowywać ją
do ewentualnego użycia w przyszłości. Jeśli ten produkt zostanie przekazany innej osobie, prosimy
przekazać tę instrukcję wraz z produktem.
Instrukcja obsługi zapewnia szybkie i bezpieczne korzystanie z produktu.
• Przed zainstalowaniem i rozpoczęciem korzystania z produktu należy przeczytać instrukcję obsługi.
• Należy zawsze przestrzegać mających zastosowanie instrukcji dotyczących bezpieczeństwa.
• Instrukcję obsługi należy mieć pod ręką, aby móc łatwo z niej korzystać.
• Prosimy przeczytać wszelkie inne dokumenty dostarczane wraz z produktem.
Należy pamiętać, że ta instrukcja obsługi może się odnosić do kilku modeli produktu. W instrukcji
zostały wyraźnie określone różnice między modelami.
Symbole i uwagi
W tej instrukcji obsługi są używane następujące symbole:
CWażne informacje i przydatne
wskazówki.
AZagrożenie dla życia i majątku.
BZagrożenie porażeniem
elektrycznym.
Opakowanie produktu jest wyko-
nane z materiałów umożlwiających
recykling zgodnie z krajowymi
przepisami środowiskowymi.
.Informacje o modelu zapisane w bazie danych produktów
można uzyskać, wchodząc na następującą stronę
internetową i wyszukując identyfikator modelu (*) znajdujący
się na etykiecie efektywności energetycznej.
https://eprel.ec.europa.eu/
A
A
A
C
SUPPLIER’S NAME MODEL IDENTIFIER (*)
INFORMATION
C
2 /43 PL Lodówka / Instrukcja obsługi
1 Instrukcje dotyczące bezpieczeństwa i
środowiska 3
1.1. Bezpieczeństwo ogólne . . . . . . . . . . . . . . . . 3
1.1.1 Ostrzeżenie HC . . . . . . . . . . . . . . . . . . . . . 5
1.1.2 Dla modeli z wodotryskiem . . . . . . . . . . . . 5
1.2. Przeznaczenie. . . . . . . . . . . . . . . . . . . . . . . 5
1.3. Bezpieczeństwo dzieci. . . . . . . . . . . . . . . . . 5
1.4. Zgodność z dyrektywą WEEE i usuwanie
odpadów: . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.5. Zgodność z dyrektywą RoHS:. . . . . . . . . . . . 6
1.6. Informacje o opakowaniu. . . . . . . . . . . . . . . 6
2 Lodówka 7
2 Lodówka 8
3 Instalacja 9
3.1. Odpowiednie miejsce instalacji . . . . . . . . . . 9
3.2. Podkładanie plastikowych klinów . . . . . . . . . 9
3.3. Regulacja nóżek . . . . . . . . . . . . . . . . . . . . 10
3.4. Podłączenie zasilania. . . . . . . . . . . . . . . . . 10
3.5. Podłączenie wody (Opcjonalne) . . . . . . . . . 11
3.6. Podłączanie węża wody do produktu . . . . . 12
3.7. Podłączanie do zasilania wodą. . . . . . . . . . 12
3.8. Dla produktów używających gąsiora na wodę
(Opcjonalne) . . . . . . . . . . . . . . . . . . . . . . 13
3.9 Filtr wody (Opcjonalne) . . . . . . . . . . . . . . . . 13
3.9.1.Mocowanie filtra zewnętrznego na ścianie
(opcjonalne). . . . . . . . . . . . . . . . . . . . . . . 14
3.9.2.Filtr wewnętrzny . . . . . . . . . . . . . . . . . . . 15
4 Przygotowanie 17
4.1. Co robić, aby zaoszczędzić energię . . . . . . 17
4.2. Pierwsze użycie. . . . . . . . . . . . . . . . . . . . . 17
5 Korzystanie z produktu 18
5.1. Panel wskaźników. . . . . . . . . . . . . . . . . . . 18
5.2. Pojemnik na warzywa z kontrolą wilgotności 28
5.3. Niebieskie światło / technologia
HarvestFresh . . . . . . . . . . . . . . . . . . . . . . 29
5.4. Aktywacja ostrzeżenia o wymianie filtra
wody. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
5.5. Korzystanie z wodotrysku (dla pewnych
modeli) . . . . . . . . . . . . . . . . . . . . . . . . . . 32
5.6. Napełnianie zbiornika wodotrysku . . . . . . . 32
5.7. Czyszczenie zbiornika wodotrysku . . . . . . . 33
5.8. Pobieranie lodu/wody (opcjonalne). . . . . . . 34
5.9. Taca ociekowa (opcjonalna) . . . . . . . . . . . . 34
5.10. Komora zero stopni (Opcjonalne). . . . . . . . 35
5.11. Pojemnik na warzywa . . . . . . . . . . . . . . . 35
5.12. Jonizator . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.13. Minibarek . . . . . . . . . . . . . . . . . . . . . . . . 35
5.14. Filtr zapachów (opcjonalny). . . . . . . . . . . . 35
5.15. Automat do lodu i pojemnik do
przechowywania lodu. . . . . . . . . . . . . . . . 36
5.16. Wytwornica lodu (opcjonalna) . . . . . . . . . . 36
5.17. Niebieskie światło/Harvest Fresh. . . . . . . . 38
5.18. Zamrażanie świeżej żywności . . . . . . . . . . 39
5.19. Zalecenia dotyczące przechowywania
mrożonej żywności. . . . . . . . . . . . . . . . . . 39
5.20. Informacje o głębokim zamrażaniu . . . . . . 40
5.21. Rozmieszczanie żywności. . . . . . . . . . . . . 40
5.22. Alert otwarcia drzwi (opcjonalny). . . . . . . . 40
5.23. Oświetlenie wnętrza. . . . . . . . . . . . . . . . . 40
6. Konserwacja i czyszczenie 41
6.1. Unikanie nieprzyjemnych zapachów . . . . . . 41
6.2. Ochrona powierzchni plastikowych . . . . . . 41
7 Rozwiązywanie problemów 42
Spis treści
3 / 43 PL
Lodówka / Instrukcja obsługi
1 Instrukcje dotyczące bezpieczeństwa i środowiska
Ten rozdział zawiera instrukcje dotyczące
bezpieczeństwa służące unikaniu obrażeń
i szkód materialnych. Nieprzestrzeganie
tych instrukcji spowoduje unieważnienie
wszelkich typów gwarancji produktu.
Zamierzone przeznaczenie
A
OSTRZEŻENIE:
Nie blokuj otworów
wentylacyjnych urządzenia ani
w zabudowie.
A
OSTRZEŻENIE:
Nie używaj urządzeń
mechanicznych, ani innych
środków do przyspieszenia
procesu rozmrażania, poza
tymi, które zaleca producent.
AOSTRZEŻENIE:
Nie uszkodź obiegu
chłodzącego.
A
OSTRZEŻENIE:
Nie używaj urządzeń
elektrycznych w komorze do
przechowywania żywności,
chyba, że są rekomendowane
przez producenta.
Urządzenie to jest przeznaczone do użytku
domowego lub w podobnych miejscach, np.
- w kuchniach personelu sklepu, biur i
innych środowisk pracy;
- gospodarstwa rolne, przez klientów hoteli,
moteli i innych miejsc typu mieszkalnego
- pensjonaty;
- catering i podobne aplikacje niehandlo
1.1. Bezpieczeństwo ogólne
• Produkt nie może być używany przez
osoby z niepełnosprawnością fizyczną,
czuciową i umysłową, bez wystarczającej
wiedzy i doświadczenia ani przez dzieci.
Urządzenie może być używane przez
takie osoby pod nadzorem i z użyciem
wskazówek osoby odpowiedzialnej za ich
bezpieczeństwo. Dzieciom nie wolno
się bawić urządzeniem.
• W przypadku awarii urządzenie należy
odłączyć od zasilania.
• Po odłączeniu należy odczekać
przynajmniej 5 minut przed
jego ponownym podłączeniem.
Nieużywane urządzenie należy
odłączyć od zasilania. Nie wolno
dotykać wtyczki mokrymi rękami! Nie
wolno ciągnąć za kabel, aby odłączyć
zasilanie, zawsze należy trzymać za
wtyk.
• Lodówki nie wolno podłączać do
luźnego gniazda.
• Podczas instalacji, konserwacji,
czyszczenia i naprawy produkt
powinien być odłączony.
• Jeśli produkt nie będzie używany
przez dłuższy czas, odłącz zasilanie i
usuń całą żywność ze środka.
• Do czyszczenia lodówki i topienia lodu
we wnętrzu nie wolno używać pary ani
parowanych materiałów czyszczących.
Para może trafić na powierzchnie
elektryczne i spowodować zwarcie lub
porażenie elektryczne!
• Nie wolno myć produktu, spryskując
go lub polewając wodą! Zagrożenie
porażeniem elektrycznym!
• Nigdy nie korzystaj z urządzenia,
jeśli górna lub tylna jego część,
zawierająca płytki obwodów
drukowanych jest otwarta (osłona
płytki obwodów drukowanych) (1).
1
1
4 /43 PL Lodówka / Instrukcja obsługi
Instrukcje dotyczące bezpieczeństwa i środowiska
• W przypadku awarii nie wolno
używać produktu, ponieważ może to
spowodować porażenie elektryczne.
Przed wykonaniem jakichkolwiek
czynności należy skontaktować się a
autoryzowanym serwisem.
• Produkt należy podłączyć do
uziemionego gniazdka. Uziemienie musi
być wykonane przez wykwalifikowanego
elektryka.
• Jeśli produkt ma oświetlenie typu
LED, w celu wymiany lub usunięcia
problemu należy się skontaktować z
autoryzowanym serwisem.
• Nie wolno dotykać zamrożonej żywności
mokrymi rękami! Może ona przymarznąć
do rąk!
• Do komory zamrażarki nie wolno
wkładać płynów w butelkach ani w
puszkach. Mogą one wybuchnąć!
• Płyny należy stawiać pionowo po
dokładnym zamknięciu pokrywki.
• W pobliżu produktu nie wolno
rozpryskiwać substancji łatwopalnych,
ponieważ mogą się one zapalić lub
wybuchnąć.
• W lodówce nie wolno przechowywać
materiałów łatwopalnych ani produktów
z gazem łatwopalnym (aerozoli itp.).
• Na produkcie nie wolno kłaść
pojemników z płynem. Zalanie wodą
części elektrycznej może spowodować
porażenie elektryczne i pożar.
• Narażenie produktu na deszcz, śnieg,
bezpośrednie promienie słoneczne i
wiatr spowoduje zagrożenie elektryczne.
Podczas przemieszczania produktu nie
wolno ciągnąć za uchwyt drzwiowy.
Uchwyt może nie wytrzymać.
• Należy uważać, aby uniknąć
pochwycenia ręki lub innej części
ciała przez ruchome części wewnątrz
produktu.
• Nie wolno stawać ani opierać się o
drzwi, szuflady ani podobne części
lodówki. Spowoduje to przewrócenie
produktu i uszkodzenie części.
• Należy uważać, aby nie przytrzasnąć
kabla zasilania.
• Podczas ustawiania urządzenia należy
się upewnić, że przewód zasilający
nie został przytrzaśnięty ani nie jest
uszkodzony.
• Nie umieszczać przenośnej listwy
zasilającej ani przenośnych zasilaczy z
tyłu urządzenia.
• Dzieci w wieku od 3 do 8 lat mogą
wkładać żywność do chłodziarek i
wyjmować ją.
• Aby uniknąć zanieczyszczenia
żywności, należy przestrzegać
poniższych wskazówek:
• – Otwarcie drzwi na dłuższy czas
może spowodować znaczny wzrost
temperatury w komorach chłodziarki.
• – Regularnie czyścić powierzchnie,
które mogą mieć kontakt z żywnością i
dostępnymi systemami odpływowymi.
• – Oczyścić zbiorniki wody, jeśli nie były
używane przez 48 godz.; przepłukać
system wodny podłączony do dopływu,
jeśli woda nie była pobierana przez 5
dni.
• – Surowe mięso i ryby należy
przechowywać w odpowiednich
pojemnikach w lodówce, tak aby się z
nimi nie stykały ani nie skapywały na
inną żywność.
5 / 43 PL
Lodówka / Instrukcja obsługi
Instrukcje dotyczące bezpieczeństwa i środowiska
• – Komory na żywność mrożoną
oznaczone dwiema gwiazdkami nadają
się do przechowywania żywności
wstępnie zamrożonej, przechowywania
lub wytwarzania lodów oraz robienia
kostek lodu.
• – Komory oznaczone jedną, dwiema lub
trzema gwiazdkami nie nadają się do
zamrażania świeżej żywności.
• – Jeżeli urządzenie chłodnicze ma być
przez dłuższy czas puste, należy je
wyłączyć, rozmrozić, oczyścić, wysuszyć
i pozostawić otwarte drzwi, aby
zapobiec rozwojowi pleśni wewnątrz
urządzenia.
1.1.1 Ostrzeżenie HC
Jeśli produkt zawiera układ chłodzenia
używający gazu R600a, należy uważać,
aby nie uszkodzić układu chłodzenia i jego
rurki podczas używania i przemieszczania
produktu. Ten gaz jest łatwopalny. W razie
uszkodzenia układu chłodzenia należy
trzymać produkt z dala od źródeł ognia i
natychmiast przewietrzyć pomieszczenie.
CEtykieta wewnątrz z lewej strony
wskazuje typ gazu użyty w
produkcie.
1.1.2 Dla modeli z wodotryskiem
• Maksymalnie dopuszczalne ciśnienie
dla dopływu zimnej wody wynosi 620
kPa (90 psi). Jeśli ciśnienie wody w
Państwa instalacji przekroczy 550
kPa (80 psi), należy zastosować zawór
ograniczający ciśnienie w Państwa
sieci wodociągowej. Jeśli nie wiedzą
Państwo w jaki sposób sprawdzić
ciśnienie wody, prosimy poprosić o
pomoc profesjonalnego hydraulika.
• Jeśli w Państwa instalacji występuje
ryzyko uderzenia wodnego, należy
zawsze stosować wyposażenie
zapobiegające przed uderzeniem
wodnym. Jeśli nie mają Państwo
pewności co do występowania
efektu uderzenia wodnego w swojej
instalacji, prosimy zasięgnąć porady u
profesjonalnego hydraulika.
• Nie podłączać do dopływu ciepłej wody.
Zachować środki ostrożności przed
ryzykiem zamarznięcia przewodów.
Temperatura robocza wody powinna
mieścić się w zakresie od 0,6°C (33°F)
do 38°C (100°F).
• Należy używać tylko wody pitnej.
1.2. Przeznaczenie
• Ten produkt jest przeznaczony
do użytku domowego. Nie jest on
przeznaczony do użytku komercyjnego.
• Produkt powinien być używany
jedynie do przechowywania żywności i
napojów.
• W lodówce nie wolno przechowywać
produktów wymagających temperatur
kontrolowanych (szczepionek, leków
wrażliwych na ciepło, materiałów
medycznych itd.).
• Producent nie bierze na siebie
odpowiedzialności za jakiekolwiek
uszkodzenia spowodowane
niepoprawnym użytkowaniem lub
obsługą.
• Oryginalne części zamienne będą
dostępne przez 10 lat od daty zakupu
produktu.
1.3. Bezpieczeństwo dzieci
• Materiały opakowaniowe należy
przechowywać poza zasięgiem dzieci.
• Nie wolno pozwalać dzieciom na
zabawę produktem.
• Jeśli drzwi produktu mają zamek, klucz
należy przechowywać poza zasięgiem
dzieci.
6 /43 PL Lodówka / Instrukcja obsługi
Instrukcje dotyczące bezpieczeństwa i środowiska
1.4. Zgodność z dyrektywą
WEEE i usuwanie odpadów:
Niniejszy wyrób jest zgodny z dyrektywą
Parlamentu Europejskiego i Rady (2012/19/WE).
Wyrób ten oznaczony jest symbolem klasyfikacji
zużytych urządzeń elektrycznych i elektronicznych
(WEEE).
Ten symbol oznacza, że sprzęt nie może
być umieszczany łącznie z innymi odpa-
dami gospodarstwa domowego po okre-
sie jego użytkowania. Zużyte urządzenie
należy oddać do specjalnego punktu
zbiórki zużytego sprzętu elektrycznego i elektro-
nicznego w celu utylizacji. Aby uzyskać informacje o
punktach zbiórki w swojej okolicy należy skontakto-
wać się z lokalnymi władzami lub punktem sprzeda-
ży tego produktu. Gospodarstwo domowe spełnia
ważną rolę w przyczynianiu się do ponownego uży-
cia i odzysku zużytego sprzętu. Odpowiednie postę-
powanie ze zużytym sprzętem zapobiega poten-
cjalnym negatywnym konsekwencjom dla
środowiska naturalnego i ludzkiego zdrowia.
1.5. Zgodność z dyrektywą RoHS:
Niniejszy wyrób jest zgodny z dyrektywą Parlamentu
Europejskiego i Rady RoHS (Ograniczenie użycia
substancji niebezpiecznych) (2011/65/WE). Nie
zawiera szkodliwych i zakazanych materiałów, po-
danych w tej dyrektywie.
1.6. Informacje o opakowaniu
Opakowanie tego wyrobu wykonano z
materiałów nadających się do recyklingu,
zgodnie z naszym ustawodawstwem
krajowym. Nie wyrzucaj materiałów opa-
kowaniowych do śmieci wraz z innymi odpadkami
domowymi. Oddaj je w jednym z wyznaczonych
przez władze lokalne punktów zbiórki materiałów
opakowaniowych.
7 / 43 PL
Lodówka / Instrukcja obsługi
2 Lodówka
C*Opcjonalne: Rysunki w tej instrukcji obsługi są schematyczne i mogą nie pasować dokładnie do
konkretnego produktu. Jeśli posiadany produkt nie zawiera odpowiednich części, informacje dotyczą
innych modeli.
1- Komora zamrażarki
2- Komora chłodziarki
3- Wentylator
4- Komora na masło/ser
5- Półki szklane
6- Półki w drzwiach komory chłodziarki
7- Minibarek
8- Zbiornik wody
9- Półka na butelki
10- Filtr zapachów
11- Komora zero stopni
12- Pojemniki na warzywa
13- Regulowane nóżki
14- Komory przechowywania zamrożonej żywności
15- Półki w drzwiach komory zamrażarki
16- Automat do lodu
17- Pojemnik do przechowywania lodu
18- Pokrywa dekoracyjna wytwornicy lodu
*Opcjonalne
2
3*4
5*6
1
*7
*11
*16
*16
*17
*18
12
13
14
15
13
*8
10
*9
8 /43 PL Lodówka / Instrukcja obsługi
2
1
3*4
5
*6
*7
11
11
10
13
9
8
*14
12
*14
2 Lodówka
C*Opcjonalne: Rysunki w tej instrukcji obsługi są schematyczne i mogą nie pasować dokładnie do
konkretnego produktu. Jeśli posiadany produkt nie zawiera odpowiednich części, informacje dotyczą
innych modeli.
9 / 43 PL
Lodówka / Instrukcja obsługi
3 Instalacja
3.1. Odpowiednie miejsce instalacji
Skontaktuj się z autoryzowanym serwisem w
sprawie instalacji produktu. Aby przygotować
produkt do instalacji, zapoznaj się z informacjami
w instrukcji obsługi i upewnij się, że zasilanie
elektryczne i wodne są zgodne z wymaganiami.
Jeśli nie, wezwij elektryka i hydraulika, aby
dostosowali zasilanie do wymagań.
BOSTRZEŻENIE: Producent nie bierze
odpowiedzialności za jakiekolwiek
uszkodzenia spowodowane przez prace
wykonane przez nieuprawnione osoby.
BOSTRZEŻENIE: Podczas instalacji kabel
zasilania produktu musi być odłączony.
Niespełnienie tego warunku może
doprowadzić do śmierci lub poważnych
obrażeń!
AOSTRZEŻENIE: : Jeśli otwór drzwiowy
jest za wąski i produkt się nie mieści,
zdejmij drzwi i obróć produkt na bok,
a jeśli i to nie pomoże, skontaktuj się z
autoryzowanym serwisem.
•Produktnależyumieścićnapłaskiejpowierzchni,
aby uniknąć wibracji.
•Produktnależyumieścićwodległości
przynajmniej 30 cm od grzejnika, kuchenki i
podobnych źródeł ciepła i przynajmniej 5 cm od
piekarników elektrycznych.
•Produktunienależynarażaćnadziałanie
bezpośredniego światła słonecznego ani trzymać
w wilgotnym otoczeniu.
•Doskutecznegodziałaniaproduktwymaga
odpowiedniej cyrkulacji powietrza. Jeśli produkt
zostanie umieszczony w niszy, należy pamiętać o
zostawieniu przynajmniej 5 cm odstępu między
produktem oraz sufitem i ścianami.
•Produktuniewolnoinstalowaćwmiejscacho
temperaturze poniżej -5°C.
3.2. Podkładanie
plastikowych klinów
Za pomocą plastikowych klinów należy ustawić
odpowiedni odstęp między produktem i ścianą na
cyrkulację powietrza.
1.
Aby zamocować kliny, odkręć wkręty z produktu i
użyj wkrętów dostarczanych wraz z klinami.
2.
Zamocuj 2 plastikowe kliny w osłonie wentylacyjnej
pokazanej jako j na rysunku.
10 /43 PL Lodówka / Instrukcja obsługi
Instalacja
3.3. Regulacja nóżek
Jeśli produkt nie znajduje się w równowadze,
dostosuj przednie regulowane nóżki, obracając je
w prawo lub w lewo.
3.4. Podłączenie zasilania
AOSTRZEŻENIE: Do połączeń
elektrycznych nie należy używać
przedłużaczy ani listew zasilających.
BOSTRZEŻENIE: Uszkodzony kabel
zasilania musi zostać wymieniony przez
autoryzowany serwis.
CW razie umieszczenia dwóch chłodziarek
obok siebie należy zostawić między odstęp
nimi przynajmniej 4 cm.
• Nasza firma nie ponosi żadnej
odpowiedzialności za jakiekolwiek szkody
wynikłe z używania bez połączenia uziemienia
i zasilania odpowiadających przepisom
krajowym.
• Po instalacji wtyk zasilania powinien być łatwo
dostępny.
• Między gniazdem ściennym i lodówką nie
może występować rozgałęziacz z lub bez
przedłużacza.
W celu regulacji drzwiczek w pionie
Poluzuj dolną nakrętkę mocującą
Przykręć nakrętkę regulacyjną (w prawo/lewo), w
zależności od położenia drzwiczek
Dokręć nakrętkę mocującą do końca
W celu regulacji drzwiczek w poziomie
Poluzuj górną nakrętkę mocującą
Przykręć nakrętkę regulacyjną (w prawo/lewo) z
boku, w zależności od położenia drzwiczek
Dokręć górną nakrętkę mocującą do końca
adjusting nut
fixing nut
fixing nut
adjusting nut
11 / 43 PL
Lodówka / Instrukcja obsługi
Instalacja
3.5. Podłączenie wody (Opcjonalne)
AOSTRZEŻENIE: Podczas podłączania
należy odłączyć produkt i pompę wodną (o
ile jest dostępna).
Podłączenia zasilania wodą, filtra i gąsiora
produktu muszą zostać wykonane przez
autoryzowany serwis. W zależności od modelu
produkt może być podłączony do gąsiora lub
bezpośrednio do zasilania wodą. Aby wykonać
połączenie, wąż wody należy najpierw podłączyć do
produktu.
Sprawdź, czy wraz z modelem produktu zostały
dostarczone następujące części:
1. Złącze (1 szt.): Służy do mocowania węża
wody z tyłu produktu.
3
1
4
2
*5
2. Zacisk węża (3 szt.): Służy do mocowania
węża wody do ściany.
3. Wąż wody (1 szt., 5 metrów, średnica 1/4
cala): Służy do podłączania wody.
4. Przejściówka (1 szt.): Zawiera filtr porowaty,
służy do podłączenia do zasilania zimną wodą.
5. Filtr wody (1 szt. *Opcjonalny): Służy do
podłączenia zasilania wodą do produktu.
Filtr wody jest zbędny, jeśli jest dostępne
połączenie z gąsiorem.
12 /43 PL Lodówka / Instrukcja obsługi
Instalacja
1
23
3.6. Podłączanie węża
wody do produktu
Aby podłączyć wąż wody do produktu,
postępuj zgodnie z poniższymi instrukcjami.
1. Rozłącz złącze przejściówki dyszy węża z tyłu
produktu i poprowadź wąż przez złącze.
2. Szczelnie przepchnij wąż wody w dół i podłącz
przejściówkę dyszy węża.
3. Dokręć złącze ręcznie, aby zamocować
przejściówkę dyszy węża. Złącze można też
dokręcić kluczem do rur lub szczypcami.
3.7. Podłączanie do zasilania wodą
(Opcjonalne)
Aby używać produktu, korzystając z zasilania zimną
wodą, należy na zasilaniu zimną wodą w domu
zainstalować standardowe złącze z zaworem 1/2
cala. Jeśli złącze jest niedostępne lub jeśli nie
masz pewności, skonsultuj się z wykwalifikowanym
hydraulikiem.
1. Odłącz złącze (1) od przejściówki (2).
1
2
3
2. Podłącz przejściówkę do zaworu zasilania
wodą.
3. Podłącz złącze wokół węża wody.
4. Podłącz drugi koniec węża do zasilania wodą
(patrz pkt. 3.7) lub, aby użyć gąsiora, do
pompy wodnej (patrz pkt. 3.8).
13 / 43 PL
Lodówka / Instrukcja obsługi
Instalacja
4. Podłącz złącze do przejściówki i dokręć ręką/
narzędziem.
2. Podłącz drugi koniec węża wody do pompy
wodnej, wciskając go do wlotu węża pompy.
5. Aby uniknąć uszkodzenia, przesunięcia
lub przypadkowego odłączenia węża, użyj
dostarczanych zacisków do odpowiedniego
zamocowania węża wody.
AOSTRZEŻENIE: Po włączeniu zaworu
należy się upewnić, że na żadnym końcu
węża wody nie ma wycieku. W razie
wycieku wyłącz zawór i dokręć wszystkie
połączenia za pomocą klucza do rur lub
szczypiec.
3.8. Dla produktów używających
gąsiora na wodę (Opcjonalne)
Aby użyć gąsiora do podłączenia wody do
produktu, należy użyć pompy wodnej zalecanej
przez autoryzowany serwis.
1. Podłącz jeden koniec węża wody
dostarczanego wraz pompą do produktu
(patrz 3.6) i postępuj zgodnie z poniższymi
instrukcjami.
3. Umieść i zamocuj wąż pompy wewnątrz
gąsiora.
4. Po wykonaniu połączenia podłącz i uruchom
pompę wodną.
CPo uruchomieniu pompy odczekaj 2-3
minuty, aby pompa uzyskała żądaną
wydajność.
CW celu wykonania połączenia wody
zapoznaj się też z instrukcją obsługi
pompy.
CW razie używania gąsiora filtr wody
jest zbędny.
3.9 Filtr wody (Opcjonalne)
W zależności od modelu produkt może mieć filtr
wewnętrzny lub zewnętrzny. Aby podłączyć filtr
wody, postępuj zgodnie z poniższymi instrukcjami.
14 /43 PL Lodówka / Instrukcja obsługi
Instalacja
3.9.1.Mocowanie filtra zewnętrznego
na ścianie (opcjonalne)
AOSTRZEŻENIE: Filtra nie należy
mocować do produktu.
Sprawdź, czy wraz z modelem produktu zostały
dostarczone następujące części:
1. Złącze (1 szt.): Służy do mocowania węża
wody z tyłu produktu.
2. Przejściówka (1 szt.): Służy do podłączenia do
zasilania zimną wodą.
3. Filtr porowaty (1 szt.)
4. Zacisk węża (3 szt.): Służy do mocowania
węża wody do ściany.
5. Urządzenie do podłączania filtra (2 szt.): Służy
do mocowania filtra do ściany.
6. Filtr wody (1 szt.): Służy do podłączania
produktu do zasilania wodą. W przypadku
używania połączenia z gąsiorem filtr wody jest
zbędny.
1. Podłącz przejściówkę do zaworu zasilania
wodą.
2. Ustal miejsce mocowania filtra zewnętrznego.
Zamocuj urządzenie do podłączania filtra (5)
do ściany.
3. Zamocuj filtr pionowo w urządzeniu do
podłączania filtra w sposób pokazany na
etykiecie. (6)
4. Podłącz wąż wody wystający z góry filtra do
przejściówki złącza wody produktu (patrz 3.6.).
Po wykonaniu połączenia powinno ono wyglądać,
jak na poniższym rysunku.
123
4
5
6
15 / 43 PL
Lodówka / Instrukcja obsługi
Instalacja
3.9.2.Filtr wewnętrzny
Dostarczany z produktem filtr wewnętrzny nie jest
zainstalowany w chwili dostawy – wykonaj poniższe
instrukcje, aby go zainstalować.
1. Wskaźnik Lód wył. musi być aktywny podczas
montażu filtra. Przełącz wskaźnik WŁ.-WYŁ. za
pomocą przycisku Lód na ekranie.
Linia wody:
Linia gąsiora:
2. Wyjmij pojemnik na warzywa (a), aby uzyskać
dostęp do filtra wody.
a
CPo podłączeniu filtra nie należy
używać pierwszych 10 szklanek
wody.
56

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw BEKO GN162330PN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van BEKO GN162330PN in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 12,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info