Water dispenser
Water dispenser is a very useful feature to obtain chilled
water without opening the door of your fridge. Since you
do not have to open the door of your fridge frequently, you
also save on electricity.
Using the water dispenser
Push in the lever of the water dispenser with your glass.
By releasing the lever, you cut off the dispensing. When
operating the water dispenser, maximum flow is achieved
by fully depressing the lever. Please note, how much
water flows from the dispenser depends on how far you
depress the lever. As the level of water in your cup / glass
rises, gently reduce the amount of pressure on the lever to
avoid overflow. If you depress the lever a small amount,
then water will trickle; this is perfectly normal and is not a
fault.
Filling in the water tank of water dispenser
Open the cap of the water tank as illustrated in the figure.
Fill in with pure and clean drinking water. dose the cap. To
avoid accidental water dispensing, we recommend you to
lock the water dispenser. [See Page 10]
Caution!
Do not fill water tank with any liquid other than drinking
water; beverages such as fruit juice, carbonated fizzy
soda drinks, alcoholic drinks are not suitable for use with
water dispenser. If such liquids are used, the water
dispenser will malfunction and may be damaged beyond
repair. The guarantee does not cover such uses. Some
chemical ingredients and additives in such drinks /
beverages may also attack and damage water tank
material.
Only use clean pure drinking water.
Capacity of water dispenser tank is 2.2 litres [3.8 pints],
do not overfill.
Push the water dispenser lever with a rigid cup. If you
are using a plastic disposable cup, then push the lever
with your fingers from behind the cup.
Safety lock is supplied for your convenience when filling
the water tank and also to avoid small children tampering
with the water dispenser. [See Page 10]
