8
8. During playback, press and hold TUNING/SKIP/SEARCH buttons to search
through the current track forward or backward.
Note:
Pairing mode is canceled about 1.5 minutes.
The above are generic steps to pair a BLUETOOTH® device, for more specific
instructions on BLUETOOTH® connectivity for your device, please consult your
manufacturer’s manual.
RE-CONNECT TO THE BLUETOOTH® AUDIO SOURCE DEVICE
If the device is already paired with the ASB-210 BT, but became unconnected even
with both Bluetooth® devices turned on. You can re-connect them by following steps:
1. Press and hold the PAIR button on the unit or on the remote to re-link the audio
source device. The Bluetooth® indicator will blink for about 1.5 minutes for
connecting.
2. Select ASB-210 BT on the audio source device for connecting. Bluetooth®
indicator will turn to solid blue if the ASB-210 BT and the device have been re-
connected successfully.
EQ EFFECTS
During playback, press EQ button on the remote repeatedly to cycle through the EQ
options; when your desired EQ effect shows on the screen, release the button.
FM RADIO
TUNING THE FM RADIO
1. Power on the unit, switch to FM (RADIO) mode by pressing SOURCE button
repeatedly.
2. Press the TUNING/SKIP/SEARCH buttons on the remote to fine tune radio station.
Press and hold the TUNING/SKIP/SEARCH buttons on the remote to auto search
radio station forward or backward respectively (When an available station will be
found, the unit will broadcast it immediately and the searching will be stopped).
During auto searching, press the TUNING/SKIP/SEARCH buttons on the remote to
stop the searching.
3. At radio mode, it is possible to access the frequency via numeric buttons on the
remote control. For example, press buttons 8, 9 and 8 to get to 89.8 MHz.
STORING YOUR FAVORITE RADIO STATION
1. During playback, press the MEM button on the remote for storing the current
station until a memory cell number flashes on the screen.
2. Use the CH+ or CH- buttons on the remote to select the corresponding memory
cell for storing the station.
3. Confirm your selection by pressing the MEM button on the remote.
4. During radio playback, press the CH+ or CH- buttons on the remote repeatedly to
recall the stored stations.
