28
5
Make sure you are using a main fuse protection for the +12V-
power input
of the amplifier within max. 30 cm of the car bat-
tery
and power cables with an amperage adequate cross-section and
main fuse (for details see section E: „Connecting“).
6
The GROUND/GND cable (-12V) should have the same cross-
section as the +12V power cable.
Make sure to get a good chas-
sis ground contact, because poor ground contacts are the cause for
most power problems with car audio installations.
7
Make sure no power, signal or speaker lines are shorting to
chassis ground by using
rubber grommets wherever a cable
has to pass through any metal part of the vehicle.
Important: Before any wiring, always remove the +12V terminal
of the battery to prevent short-circuiting. The last lead to be connec-
ted in every installation is always the positive +12 Volt terminal
of the battery.
Connect this lead only after having completed and
checked all other connections.
C208 408 508 Manual UK-D-F 23.07.2003 19:30 Uhr Seite 28
