613437
44
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
44
AXIS P33 Series - System Options
Storage - Disk Management
Disk Management is used to setup and manage local storage devices. Local storage can be used to save video streams from
triggered, scheduled or continuous recordings. For information on how to use the local storage with Triggered and Scheduled
Event Type Setup and Continuous Recordings see the online help
.
Storage Device
Once a formatted SD card has been inserted in the SD memory card slot, it is automatically mounted and information such as
the available space and the size of the storage device is shown. The disk is full when there is less than 1000KB of space left on
the memory card.
The memory card must be formatted to be mountable. Mounting is done automatically when a new memory card is inserted,
or when the system boots. The only time you need to do a manual mount, is when you have executed an unmount command
and the memory card has not been ejected and reinserted.
Status shows as follows:
OK - The storage device is mounted and working correctly
connected - The storage device is present but not mounted
disconnected - The storage device is not present.
failed - A problem has been discovered.
If the status shows as failed, click Check disk to see if the problem can be found and then try Repair. As a final measure the
storage device might need to be reformatted. If there is important data on the storage device, see Troubleshooting, on page
50.
Disks are normally preformatted when purchased, but if for whatever reason you need to...click the Format button to format
the disk. Any previous data stored on the disk will be lost.
Read only shows the status of write-protect tab on the memory card. The status no means the tab is in the write-enabled
mode and recordings can be saved to the memory card. The status yes means the memory card's tab is in the
write-protected/read-only position, or there is a system error and recordings cannot be saved to the memory card.
Important!
To prevent loss of data, click Unmount before removing a storage device.
Storage Device Settings
Storage Device Settings is used to configure removal of recorded video.
Automatic disk cleanup
To avoid filling up local storage, Automatic disk cleanup can be set to continually remove older recordings to create more
space.
Once enabled, automatic disk cleanup can be set to remove recordings that are older than a set number of days or weeks and
when a percentage of the disk is full. For longer or continuous recordings, the oldest part of the recording is removed, it is
recommended to have a time and date overlay in the video for proper tracking of recordings. See Text Overlay Settings, on
page 14.
Note:
For continuous recording to work properly, do not set the limit to more than 95% full.
Interrupted recordings with an Unknown status, partial recordings and any other recording that has not been removed by disk
cleanup can be removed manually from the Recording List using the Remove button.
Check Lock disk to stop writing to the disk and protect recordings from being removed. A locked disk cannot be formatted.
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Axis P3343 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Axis P3343 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info