613437
36
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
36
AXIS P33 Series - System Options
System Options
Security
Users
User access control is enabled by default. An administrator can set up other users, by giving them user names and passwords.
It is also possible to allow anonymous viewer login, which means that anybody may access the Live View page:
The user list displays the authorized users and user groups (levels):
HTTP/RTSP Password Settings - Select the type of password. You may need to allow unencrypted passwords if there are
viewing clients that do not support encryption, or if you recently upgraded the firmware and the existing clients support
encryption, but need to log in again, and be configured to use this functionality.
User Settings - Check the option your require.
Enabling anonymous viewer login - allows any viewer direct access to the Live View page.
The Enable anonymous PTZ control login option allows anonymous users to join a queue for gaining control of the
PTZ controls provided by the Network Camera. See PTZ, on page 27 for more information on Pan Tilt Zoom settings.
Enable Basic Setup - Before using the Network Camera, there are certain settings that should be defined, most of
which require Administrator access privileges. You can quickly access these settings through Basic Setup in the menu.
All settings are also available from the standard Setup link in the menu. Basic Setup is enabled by default but can be
disabled and removed from the menu.
IP Address Filter
Enable IP Address Filtering to allow or deny access to the network cameras. Once enabled, the IP addresses in the list are
allowed or denied access according to the choice made in the drop-down list Allow/Deny the following IP addresses.
The administrator can add up to 256 IP address entries to the list (a single entry can contain multiple IP addresses). The users
from these IP addresses need to be specified in the user list with the appropriate access rights. This is done from Setup >
System Options > Security > Users.
HTTPS
The network cameras support encrypted browsing using HTTPS.
A self-signed certificate can be used until a Certificate Authority-issued certificate has been obtained. Click the Create
self-signed Certificate button to install a self-signed certificate. Although self-signed certificates are free and offer some
protection, true security is only implemented after the installation of a signed certificate issued by a certificate authority.
A signed certificate can be obtained from an issuing Certificate Authority by clicking the Create Certificate Request button.
When the signed certificate is returned, click the Install signed certificate button to import the certificate. The properties of
any certificate request currently resident in the camera or installed can also be viewed by clicking the Properties... button. The
HTTPS Connection Policy must also be set in the drop-down lists to enable HTTPS in the camera.
For more information, please refer to the online help .
Viewer Provides the lowest level of access, which only allows access to the Live View page.
Operator An operator can view the Live View page, create and modify events, and adjust certain other settings.
Operators have no access to System Options.
Administrator An administrator has unrestricted access to all menus for configuration and can determine the
registration of all other users.
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Axis P3343 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Axis P3343 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info