613437
18
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
18
AXIS P33 Series - Video & Audio
Contrast - Adjust the contrast of the image by raising or lowering the value in this field.
White balance
This is used to compensate for the different colors present in different light sources, to make the colors in the image appear
the same. The network camera can be set to automatically identify the light source and compensate for its color. Alternatively,
the type of light source can be manually selected from the drop-down list. See the online help files
for a description of
each available setting.
Wide Dynamic Range
Wide dynamic range improves the exposure when there is a considerable contrast between light and dark areas in an image.
Note: Wide dynamic range is only possible when the Exposure control setting is set to Automatic.
Exposure Settings
Configure the exposure settings to suit the image quality requirements in relation to lighting, frame rate and bandwidth
considerations.
Exposure value - Use this slidebar to fine tune the exposure. Increasing the exposure will improve image quality at the
expense of the total frame rate. There may also be an increase in motion blur.
Exposure control - Set to Automatic for optimal exposure settings automatically, for example brightness and noise.
Flicker-free 50 or 60 Hz is used to remove flicker which can be caused by fluorescent and other light sources. The Hold
current option locks the current exposure settings.
Enable Backlight compensation - Backlight compensation makes the subject appear clearer when the image background is
too bright, or the subject too dark.
Exposure zones - This setting determines which part of the image is used to calculate the exposure. The Auto setting can be
used in most situations, but for particular requirements, select Defined and click the Edit button to open the Exposure
Windows dialog to custom define the exposure zone.
IR cut filter - Set this filter to Off to allow the camera to 'see' infrared light, making the image clearer in low light
conditions, e.g. at night or if using an infrared lamp. If set to Auto, the camera will automatically switch between IR cut filter
On and Off, according to the current lighting conditions. Note that if this IR cut filter is set to Off, the image is in black and
white.
Exposure priority - This defines the balance between image quality and the frame rate. When Motion is prioritized, motion
blur is minimized, but the image quality may be reduced with a higher frame rate. A prioritized Low noise will provide better
image quality with a lower frame rate.
Shutter - A smaller value means less motion blur, but requires a well lit scene. A larger value will allow more light in the
camera so that even a low lit scene can produce a good image, but at the expense of increased motion blur.
Gain - A lower value means less noise; in dark situations this can lead to a very dark image. A larger value means more
amplification making it possible to observe a dark scene, but with increased noise. When Motion is prioritized the shutter
time is kept as low as possible. When Low noise is prioritized the gain is kept as low as possible. Setting min/max to the same
values is equivalent to setting a fixed value.
Enable automatic iris adjustment - This should always be set to Enabled, except during focusing, or when using a fixed iris
lens.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Axis P3343 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Axis P3343 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info