562526
28
Verklein
Vergroot
Pagina terug
1/49
Pagina verder
TFT-LCD TV
READ CAREFULLY
BEFORE OPERATION
USER MANUALUSER MANUAL
W102D
W102D
Before connecting the AC power cord to the DC adapter outlet ,make sure the
voltage designation of the LCD TV corresponds to the local electrical supply .
If you are unsure of your power supply , ask your local power company .
Never insert anything metallic into the cabinet openings of the LCD TV;
otherwise may cause the danger of electric shock.
To avoid electric shock, never touch the inside of the LCD TV / adapter.
Only a qualified technician could open the case of the LCD TV/adapter.
Never use your LCD TV/adapter when the power cord has been damaged .
Make sure there is nothing rest on the power cord, and keep the cord away
from the place where people can trip over it .
Be sure to hold the plug, not the cord when disconnecting the adapter from
an electric socket.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
TO PREVENT ELECTRICAL SHOCK.
DO NOT REMOVE THIS COVER. NO
USER- SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol indicates
dangerous voltage
inside the product that
presents a risk of electric
shock or personal injury.
This symbol indicates
important instructions
accompanying the
product.
Please read this manual carefully before using this product.
IMPORTANT SAFETY INSTRUCTIONS
Openings in the LCD TV/adapter cabinet are provided for ventilation.
To prevent overheating, these openings should not be blocked or covered.
Also, avoid using the LCD TV on a bed ,sofa ,rug, or other soft surface. If not,
may block the ventilation openings in the bottom of the cabinet. If you put the
LCD TV in a bookcase or some other airless space, be sure to provide adequate
ventilation.
Do not expose the LCD TV to extreme temperature conditions or to extreme
humidity conditions.
The apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, be placed on the apparatus.
Do not clean the front with keton-type materials (e.g.Acetone ),ethyl alcohol,
toluene, ethy lacid, methyl, or chloride-these may damage the panel.
Locate your DC adapter near an easily accessible AC outlet.
If your LCD TV does not operate normally in particular, if there are
any unusual sounds or smells coming from it unplug it immediately and
contact an authorized dealer or service center.
High temperature can cause problems. Don`t use your LCD TV in
direct sunlight, and keep it away from heaters, stoves, fireplaces, and other
sources of heat.
Unplug the DC adapter when it is going to be left unused for a long time .
To reduce the risk of fire or electric shock, and annoying interference, use
the recommended accessories only.
If the LCD TV is broken, do not try to repair it yourself. Contact
qualified service personnel.
Unplug your DC adapter from the AC outlet before any service.
Be sure the service technician uses authorized replacement parts or their equi-
valents. Unauthorized parts may cause fire, electrical shook, or other hazards.
Following any service or repair, be sure the service technician performs safety
checks to certify that your TFT-LCD TV is in a safe operating order.
The apparatus with CLASS I construction shall be connected to a MAINS
socket outlet with a protective earthing connection.
IMPORTANT SAFETY INSTRUCTIONS
PANEL BUTTON FUNCTIONS
Panel control
6
CONTENT
AV SETUP
AV setup
16
EXTERNAL EQUIPMENT
Connecting diagram
7
LET'S START
Change source operation
11
REMOTE CONTROL HANDSET
Remote buttons
8
Battery installation
9
TV MENU SETUP
Picture
TV setting
System
12
13
14
15
Channel edit
DVD OPERATION
Brief introduction
17
Features
18
Compatible disc types
19
VCD, SVCD menu playback
21
Select track to play directly
by number buttons
22
Playback
20
Select language/audio
22
Repeat playback
23
Repeat playback of
selected segment
23
Fast playback
24
Play from the desired position 24
MPEG4 and JPEG file playing
25
INSTALLATION
Mounting bracket install
1
Can adapter connection
2
Battery pack installation
3
Headrest bracket installation
4
CARD READER AND USB OPERATION
Usage of USB equipment
and 3-IN-1card reader
28
CONTENT
DISPLAY MODE
43
Display mode
SPECIFICATIONS
Specifications
42
DVD FUNCTION SETUP
General setup
30
33
Password setup
Preference setup
32
Video setup
31
Audio setup
30
TROUBLE SHOOTING
TV troubleshooting
40
DVD troubleshooting
41
DVB FUNCTION SETUP
General setup
34
DVB-T setup
35
Video setup
34
FM OPERATION
FM
38
System
39
Figure 1:
Take the backboard and 4 screws from accessories, and lie the host machine flat,
with bottom casing facing upwards. According to the direction shown in the figure,
make the 4 screw holes in the backboard aim at the 4 in the bottom casing of the
host machine, and then use 4 screws to fix the backboard onto the bottom casing
of the host machine (shown in the figure 1).
host machine
backboard
Figure 2:
Take out the headrest bracket from accessories, rip off the magic band firstly,
and then make the face with sponge alongside the headrest of the car seat,
and the end with clasp plate face upwards; then bind the magic band on the
headrest of car seat (shown in figure 2); finally check whether the headrest
bracket becomes loose.
clasp plate
headrest bracket
car seat
INSTALLATION
2
HEADREST BRACKET INSTALLATION
When installing the host machine with backboard onto the headrest bracket, take
hold of the host machine with two hands, make the left and right clasp slots of the
host machine aim at those of the headrest bracket vertically and slide downwards
until a click sound is heard. Now you still need to uplift it upwards to check whether
it is loose, if not, it means that the installation is proper and full.
Figure 3:
Install the host machine and headrest bracket onto the car seat, with the effect
shown in the figure 4.
When taking out the host machine, press the clasp plate backwards to make the host
machine come loose, and then take the host machine with one hand.
Clasp
plate
Figure 4:
INSTALLATION
3
Connect car adapter (make sure to use the recommended
accessories only) to the socket in your car correctly.
Connect the other end of the car adapter to the TV DC
input socket, as the picture show:
The car adapter also can be used to charge the
battery pack if the battery pack is on .
The car adapter can only be connected to DC
12V socket in your car, otherwise may cause
damage to the car adapter or the TV. Please pay
attention to this.
CAR ADAPTER CONNECTION
When use the TV in a car, you can use the car adapter
instead of the battery pack, to save energy of your
battery in order to make it work longer.
BATTERY PACK
1. Installing battery pack
Place this unit to the center of the back, then slide the battery pack to secure it as the
direction (figure ).
When the battery pack is power on, the orange indicator will flash for about 1 second,
indicating that the whole charging system is powered on .
After entering charging process, the red indicator is always on, which means that the
battery pack is being charged.
BATTERY PACK INSTALLATION
4
1
Please use the adapter provided, connect to the DC IN socket of the battery pack to
charge it (figure ). When the battery is on the TV, you also can charge it while LCD
TV is working (figure ).
3
4. Recharging battery pack
2
3. Remove battery pack
Push the battery pack as the direction shown in figure , then take it out.
3
4
2
2. Use battery
If the battery is full, you can use this LCD TV freely.
If the battery pack is installed correctly, the indicator on the TV will turn red. If not, please
check whether the battery is full or be installed correctly.
When the voltage of the battery is lower than 5.8V, the TV set will turn off automatically.
You have to charge the battery to make it work again.
When use the battery pack, it may feels a bit warm, that's OK.
Button
1
4
If the battery pack is on the LCD TV, whether the TV is in STANDBY mode or POWER
ON mode, it can charge the battery. In POWER ON mode, a battery sign will be
displayed on the screen to say the battery is being charged.
" "
Indicator
Please use the recommended adapter to recharge it, otherwise it will damage the battery
pack.
BATTERY PACK
After battery pack is fully charged, the green indicator is always on ,which mean that
the battery pack has been fully charged, so please unplug the power cord.
If the indicator has other displays after power-on of the system, it means the battery
pack has troubles. Please unplug power cord and contact the appointed servicing
personnel.
If the rechargeable battery hasn't been used for a long time, the quantity of electricity
will be too low and the LCD TV cannot power on, so please charge the battery first.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
CAUTION:
5
New battery or battery stored for a long time may take more time to charge.
5. Cautions on battery pack
This LCD TV's battery pack is rechargeable. It should be fully recharged before use.
Do not dispose it in fire or water. Do not heat the battery pack.
Do not use it in high ambient temperature or near a heat source.
Do not connect the positive and negative polarities with a metal object.
The operating temperature of the battery pack is 0~35
Over-charge: the battery is over-charged or over-saturated, so that the voltage of the
battery exceed the upper limit voltages,(For lithium batteries, the upper limit voltage
for a single battery is 4.25V).
Non-saturated charge: the indicator indicates that charging has been always on but
the battery does not turn to the saturated status after regular duration of charging .
Please remove the battery pack if you do not intend to use this LCD TV for an extended
period of time. (Power is still consumed although this LCD TV is turned off. Therefore,
the battery pack may be damaged due to excessive discharging.)
Self-discharge: discharge of battery due to the static power consumption of the
peripheral circuit, damp air and self-structure.
Over-discharge self-discharge of the battery too long time results in that the voltage
of the battery are lower than the lower limit voltage.(For lithium batteries, the lower limit
voltage for a single battery is 4.25V ) Note that to avoid over-discharge of the battery in
the case of long disuse of the battery, regularly charge the battery, so that the voltage
of the battery is maintained between 3.6V and 3.9V.Trickle charge: when the voltages
at both poles of the battery are lower than 3.0V(for lithium battery ),low current will be
employed to charge the battery at 0.01C(C indicates the battery capacity)for about
15~30 minutes.
6
PANEL BUTTON FUNCTIONS
PANEL CONTROL
Indicator( )Indicator is red when in standby mode, green when working normally.
1
IR sensor window
2
Front panel
Top panel
3
STANDBY (To switch from standby mode to power-on mode)
4
SOURCE (Select input source)
5
CH-/+ (Increase or decrease channel number/to move selected menu item)
10
(Eject button)
6
VOL-/+ (Increase or decrease volume/characteristics)
7
SETUP (Enter or exit setup menu)
9
(Stop button)
8
(Play/puase button)
3 4 5 6
7 8 9 10
1
11
12
13
14
15
16
17
19
20
Left panel
11
USB jack
12
MEDIA CARD socket
13
12Volt DC power input socket
14
AV audio video input jack
15
AV audio video output jack
17
Headphone jack
18
FM antenna input
Right panel
20
Disc in/out door
16
Headphone jack
18
RF input terminali
19
2
DVD or VCR player
NOTE
CONNECTING DIAGRAM
You should insert any interconnecting cables BEFORE plugging in the power cord.
EXTERNAL EQUIPMENT
The left of TV set
7
RL
VIDEO
RL
VIDEO
TV
8
REMOTE BUTTONS
REMOTE CONTROL HANDSET
STANDBY
1
Switches between standby mode and power-on
mode.
VOLUME+/-
3
Increases or decreases sound amplitude
CHANNEL+/-
4
Steps up/down program numbers.
RETURN
5
To swap between a previous program and the
current program (only valid in TV mode.)
SETUP
7
Display setup menu, different in TV and DVD
mode.
B.L ON/OFF
8
To turn on/off the screen ( only valid in radio
mode).
16
AUDIO
In DVD mode, to change sound decode mode like
DTS or Dolby.
In DVB mode, to change sound track between left,
right and stereo.
PICTURE
2
Set picture mode: Dynamic, Soft, User, Standard.
1
2
3
5
8
11
7
10
6
17
4
9
14
9
CARD/DISK
To switch in card reader, DVD and USB modes
(only valid in DVD mode).
11
STOP
To stop playing a DVD (only valid in DVD mode).
10
DVD MENU
Display DVD menu or open/close PBC;
In DVB mode, long press to auto scan .
13
12
16
RATIO
6
Switch the picture mode in 4:3 or 16:9.
12
Switch between TV and radio modes (valid in
DVB mode).
TV/
17
ANGLE
Change camera angle, JPEG
playback modes switch.
13
EPG/
To display the program guide (valid in DVB mode)
/To select the previous chapter or track (valid in
DVD mode).
REPEAT
To repeat playback (valid in DVD
mode ).
18
15
18
FAV./
In DVB mode, open favourite channel list/To select
the next chapter or track (valid in DVD mode).
14
ANT. ON/OFF
In DVB mode, turn on/off antenna power supply.
15
9
REMOTE CONTROL HANDSET (contd)
EJECT
Disc in/out ,valid in DVD mode.
17
MUTE
Sound mute button.
18
TWO-DIGIT button
20
Switches between one or two-digit program
numbers.
DISP
25
Display or hide channel information / Display
or hide disc information.
UP/DOWN cursor
24
To navigate upward/downward in the menu.
SOURCE
21
Select input source: TV, DVD, AV, DVB, FM.
OK button
22
To confirm a selection/item in menu.
LEFT/RIGHT cursor
23
To move left/right or adjust a selected item
in menu.
23
27
18
19
20
21
22
24
26
25
28
30
31
33
32
17
Number buttons
To select program number.
19
GOTO
32
To play a DVD from a certain time-point (only
valid in DVD mode).
SUBT
30
In DVD/DVB mode select the subtitle language.
Switch to JPEG display mode(only valid in DVD
mode).
LANG
31
Switch the output language (valid in DVD/DVB
mode).
29
INFO/
28
To display the information about channel and
program (valid in DVD and DVB mode)/Fast
backwards DVD playback (only valid in DVD
mode ).
A-B
33
To repeat play a DVD segment (only valid in
DVD mode).
29
To fast backward playback (valid in DVD mode).
26
Pauses playing/steps playback in pause mode
(only valid in DVD mode) .
27
To play normally, valid in DVD mode.
10
BATTERY LIFE
NOTES
CAUTION
Please put battery in the place children cannot touch. If swallow by accident, please
contact with the local doctor immediately.
BATTERY INSTALLATION
REMOTE CONTROL HANDSET
When installing battery , please make the two polarities of battery accord with the two polarities
inside the battery case (positive upward, negative downward), as the following figure:
1
2
Step 1: Push the button toward left.
Step 2: Pull the battery holder out.
CR2025CR2025
Generally speaking, the battery can be used for one year. But the detailed battery life
and usage times are related to the remote control operation.
If the remote control is still invalid when near to the unit, please replace the battery.
Do not charge the battery, short-circuit, disassemble, heat or throw it into fire.
Take care not to fall and beat the remote control, which will damage the remote control
or cause function trouble.
Please use CR2025 battery.
Do not use rechargeable battery .
If the battery of remote control will not be used for a long time, please take it out.
Please confirm whether accessories have power adaptor.
Please make sure to use power adaptor in specification range, otherwise it will
cause trouble.
POWER ADAPTOR INSTALLATION
Step3:Insert one 3VOLTAGE LITHIUM BATTERY matching the -/+ polarities of the battery to
the -/+ marks inside the battery compartment,as the bitmap.
PICTURE
LET'S START
11
INDICATOR
STANDBY
After the unit has been suitably placed / fixed, on the desk or on your car, and all cords are
connected for power, input and output .
If your unit is not fixed with the battery pack, connect the adapter to the LCD TV, the unit will
go into standby mode, and you can see the indicator get into red.
If your unit is fixed with the battery pack, and the quantity of electricity is high enough, the
unit will go to standby mode, indicator turn red. If not, please check the battery pack or contact
authorized service department.
CHANGE SOURCE OPERATION
You can change the input source from the source menu. Press [SOURCE] button on unit or
[SOURCE] key on remote control to show the menu on screen.
The current source item is highlighted. Press [ ] buttons on the remote control, or [CH+/
CH-] key on the top panel of LCD TV to select your desired mode. Press the [ ] or [OK]
button to confirm your choice .
STANDBY
TV
DVD
AV
DVB
FM
What you should do next is, press the STANDBY key on the top panel of the TV, or [STANDBY]
button on the remote control to make the unit switch to power-on mode then you will see the
LED indicator turn green. Now you can enjoy the many features of your new product.
Item
BRIGHTNESS
To adjust brightness
CONTRAST
To adjust contrast
SATURATION
To adjust color saturation
This product can store up to 100-channel programs (0 99). You can scan and
store all the channels through manual or automatic mode.
In TV mode, press [SETUP] button on the remote control or top panel and menu will show
as follows:
Through pressing [ ] button on the remote control,
you can select main menu sections(main menu
sections consist of
. Press [ ] or [OK] button to enter
this menu section.
" PICTURE " , " TV SETTING " ,
" SYSTEM ")
Press [ ] button on the remote control to select
the item, and then press [ ] button to adjust
parameter value. Press [SETUP] button to save
your selection and return to main menu sections.
Select " " and menu will show as right :
Press [ ] button to select items and [ ]
button to adjust.
TV MENU SETUP
Description
SHARPNESS
To adjust picture sharpness
TINT
To adjust picture tint, only valid in N 3.58/N 4.43/PAL60 and display
mode with V-scanning frequency equal 59.94
12
PICTURE
SELECT RETURN
SETUP
PICTURE
BRIGHTNESS
50
CONTRAST
40
SATURATION
50
SHARPNESS
34
TINT
50
ENTER
OK
PICTURE MODE STANDARD
COLOR TEMP STANDARD
SELECT RETURN
SETUP
PICTURE
BRIGHTNESS
50
CONTRAST
40
SATURATION
50
SHARPNESS
34
TINT
50
PICTURE MODE STANDARD
COLOR TEMP STANDARD
ADJUST
PICTURE MODE
Can be changed between: USER , STANDARD , DYNAMIC
and SOFT .
" " " " " "
" "
COLOR TEMP
To select a color temp between : , COOL WARM ."STANDARD " " " and " "
Select " "and menu will show as follows:
TV MENU SETUP
13
TV SETTING
Press [ ] button to select item and press [ ] button to adjust .
TV SETTING
SOUND SYSTEM
COLOR SYSTEM
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
SELECT
RETURN
SETUP
ENTER
OK
CHANNEL 2
CHANNEL EDIT
AUTO
I
136.20MHZ
Description
FINE TUNE
AUTO SEARCH
CHANNEL EDIT
COLOR SYSTEM
Can be changed between: "Auto", "PAL" and "SECAM".
SOUND SYSTEM
Can be changed between:"BG", "DK", "I" and "L" .
To scan programs and store all of them automatically.
To enter a submenu to set channel skip and channel swap.
Please refer the next page.
NOTES
Which COLOR SYSTEM mode and SOUND SYSTEM mode to use is related to your
local TV broadcasting system.
""""
SECAM system is only used by some European countries and districts, such as France.
If the local system is SECAM L, the color system must be selected as "SECAM" and sound
system must be selected as "L".
Item
Adjust current channel frequency accurately to make the sound
and picture effect better.
CHANNEL
MANUAL SEARCH
To change the channel number.
To scan programs by manual.
CHANNEL
SKIP
SWAP
To select current channel .
To select "ON" or "OFF ", you can select " ON " to make current
channel unaccessible while using [CH+/-] button to browse
channels.
Press [ ] button to select the channel, and press [OK] button to
swap the channel.
Description
Item
14
TV MENU SETUP
TV SETTING
SKIP
SWAP
CHANNEL 2
OFF
38
SELECT RETURN
SETUP
ADJUST
during the searching, you can press [SETUP] button to stop.
CHANNEL EDIT
TV MENU SETUP
Press [ ] to select " " item and press [ ] button to enter the following section:
15
SYSTEM
You can setup some system configuration here.
Description
TRANSPARENCY
SLEEP
RATIO
RESET
To change transparency of OSD.
To reset all values to default.
Press [ ] button to select item and press [ ] button to adjust or activate.
Item
SYSTEM
SLEEP
RATIO
RESET
SELECT
RETURN
SETUP
ENTER
OK
TRANSPARENCY LEVEL 2
0
16 : 9
LANGUAGE ENGLISH
LANGUAGE
Select OSD language.
Turn off the TV after certain minutes automatically, the time you
can set is between: Off~240Min.
Set the TV image ratio 4 : 3 or 16 : 9.
STANDBY: 59S
NOTE
If you have set the sleep time , once the time is less than 1 minute there will be a remind
signal display on the screen :
At present if you want to cancel the sleep function, please press [SETUP] button on
remote control.
If no signal input in TV, AV, the screen will show a similar signal like the following figure.
AV SETUP
16
This unit will go into standby mode automatically if there is no signal input for more than
5 minutes.
AV
NO SIGNAL
04:50
Disc Pictures
TV Screen
4:3
16:9
Pan-Scan Letterbox
16:9
4:3
DVD is well known for its extraordinarily large capacity and outstanding audio-video effects.
Its capacity is as high as 4.7-17 GB (approximately 7-26 times the CD capacity).With 500-line
horizontal resolution of picture , it brings a new era to the household AV products.
Analog
Linear PCM
FM modulation
Linear PCM
One
430 lines or more
350 lines or more
250 lines or more
CDROM
650MB
12cm/8cm
VCD
Super VCD
Digital/MPEG1
Digital Digital
Digital/MPEG2
650MB
44.1kHz
12cm/8cm
74min.
650MB
12cm/8cm
45min.
CD
650MB
44.1kHz/16bit
12cm/8cm
74min.
LD
44.1kHz/16bit
30cm/20cm
1 side 60min.
2 sides 120min.
Digital/MPEG2
Single-
sided
1 layer
4.7G
Single-
sided
2 layers
8.5G
Double-
sided
1 layer
9.4G
Double-
sided
2 layers
17G
133min.
500 lines or more
Multiple
Dolby Digital/Linear PCM
32 types
242min. 266min. 484min.
DVD
48kHz,96kHz/16,20,24bit
12cm/8cm
Recording Method
Capacity
Playback time
Disc Diameter
Horizontal
Resolution
Aspect Ratio
Subtitle
Audio
Sound Quality
Max. 16 types
DVD disc can support as many as 8 dubbing languages and 32 subtitle languages.
Multiple languages and subtitles
User can select to play the desired plots (the beginning, development or ending) of the same disc.
Multiple story plots
Multiple aspect ratios support various TV screens.
Multiple aspect ratios
Comparison Between DVD and Other Discs
Function Introduction
DVD OPERATION
Brief Introduction
17
This player has employed the new generation DVD decode chip with built-in Dolby Digital
decoder which will bring you to a brand-new AV ententainment world. The 2-laser super
error-correction mechanism supports CD-R.
Brand-new AV Effects
Many Convenient Features
It’s possible to select the desired beginning, development and ending of a story.
Direct go to desired scene (title/chapter/track search).
Capable of playing PAL/NTSC discs.
Parental lock function to prevent children from watching unsuitable discs.
Multiple dubbing languages and subtitle languages bring the best entertainment status to you all the
time.
Super Compatibility with super VCD, VCD, CD, CD-R ,HDCD,
KODAK PICTURE CD etc.
18
DVD OPERATION
Features
Progressive-scan video outputs to eliminate the flickers hardly ouvercome by interlacing scan and
therefore your eyesight will be well-protected. At the same time, the pictures deflnltion Is sharply
enhanced and the pictures will be finer, smoother and stabler
Brightness, chroma and contrast adjustment functions to render your eyes more comfortable.
Dolby output for 2channel(DOWNMIX).
Compatible with MPEG4 discs to produce wonderful pictures.
108MHz/12bit video DAC, with more vivid and brilliant pictures.
DVD-Audio decoding output to reproduce original and realistic sound effects.
19
DVD OPERATION
Sizes
Recorded Contents
Types
CD-DA Digital audio
VIDEO CD Compressed digital audio+compressed digital video
(dynamic picture)
DIGITAL VIDEO
SVCD: Compressed digital audio+compressed digital video
(dynamic picture)
12cm
12cm
12cm
12cm
DVD: Compressed digital audio+compressed digital video
(dynamic picture)
Compatible Disc Types
NOTES
These icons on the top banner indicate the disc types that the function described in
this section applies to.
VCD
Issues related to
CDVCDSVCDDVD
Applies to CD disc
CD
Applies to DVD disc
SVCD
Applies to SVCD disc
Applies to VCD disc
DVD
12cm
DVD: Compressed digital audio + compressed digital video(still picture)
This model do not support the 8cm disc. Do not insert that type of disc into this
device to prevent disc jam.
MPEG4
Applies to MPEG disc
MPEG4
VCDSVCD
When playing SVCD, VCD2.0 discs with menu playback function, you may enjoy simple menu
playback alternation function. You may set menu playback state in the setup menu and select
menu playback or sequence playback.
For instance, VCD 2.0 disc menu playback.
VCD, SVCD MENU PLAYBACK
DVD OPERATION
21
2. After entering main menu 1, TV screen displays submenu.
2.
3.
4.
5.
1.
3. Press [ ], [ ] buttons to turn pages.
4. Press number buttons to select submenu content. For instance, press number button 5
and the unit begins to play the fifth track.
2.
3.
4.
1.
5.
5. When playing, pressing [DVD MENU] button to return to the root menu.
1. TV screen displays main menu.
Press number buttons to select. For instance, press number button 1 to select main menu 1.
1.
2.
1.
2.
DVD MENU
OK
PLAY
When playing, in PBC on mode, can not direct play the chapter/track entered by you press the
number button ,please press [DVD MENU] button to turn PBC off.
NOTE
PICTURE
As for VCD or CD disc with multiple channels, you may select audio output from left or right
channel or select stereo audio output. For VCD disc, left channel records dubbing and right
channel records singing, and you may select left channel for dubbing.
VCD, CD disc:
Mono Right
Mono Left
Stereo
Language type varies with disc recording.
When playing some DVD discs, pressing [LANG] button to switch language may
result in playing the track from its beginning.
For VCD story disc with double languages, you may press [LANG] button to select
the desired language.
NOTE
DVD disc:
1. Press [LANG] button.
CDVCDSVCDDVD
As for DVD and SVCD discs with multiple languages, you may select the desired language
when playing.
Audio 1/2
French
Audio 2/2
Chinese
SVCD disc:
Audio 2
Audio 3
Audio 1
Audio 4
SELECT LANGUAGE/AUDIO
DVD OPERATION
22
SELECT TRACK TO PLAY DIRECTLY BY NUMBER BUTTONS
CDVCDSVCDDVD
1. Insert disc, after disc reading and normal playback, press number buttons to select track
to play directly.
1 + 6
6
-/--
If track number is less than 10, press number buttons 1 to 9 to directly select. For instance,
select the seventh track:
7
For instance, select the 16th track
If track number is more than or equal to 10, press [-/- -] button and then number buttons 0 to 9.
If track number is more than or equal to 20, press [-/- -] button twice and then number buttons
0 to 9. The rest can be performed by analog.
NUMBER
LANG
The A-B repeat function may be invalid to some discs. In menu playback mode, the segment
can only be selected in the track.
3. Press [A-B] button for the third time.
The unit restores to normal playback.
NOTE
When playing disc, you may press [A-B] button to play your desired segment content repeatedly.
1. In normal playback, press [A-B] button at the beginning point (point A) of the segment that
you desire to play repeatedly.
TV screen displays:
A
2. In normal playback, press [A-B] button at the ending point (point B) of the segment that
you desire to play repeatedly.
TV screen displays:
AB
The unit automatically returns to point A and begins to play the selected segment (A-B).
CDVCDSVCDDVD
MPEG4
REPEAT PLAYBACK OF SELECTED SEGMENT
To SVCD, VCD2.0 discs, the repeat function cannot be operated in menu playback mode.
1. Press [REPEAT] button. Each press of REPEAT button may realize different repeat functions.
The repeat playback function enables a certain title/chapter/track/disc repeated.
DVD DISC:
SVCD, VCD, CD discs:
To SVCD, VCD2.0 discs, the repeat function is effective in sequence playback mode; to VCD1.1,
CD discs, the repeat function may be directly operated.
Track Repeat Off
ALL
Repeat Off
TitleChapter
ALL
CDVCDSVCDDVD
MPEG4
REPEAT PLAYBACK
DVD OPERATION
23
A-B
REPEAT
1. Search title and chapter. For instance, search the 2nd chapter in title 6.
Inputting a certain time, title number or chapter number directly may search in the disc fast and
then play forward from this position.
Play DVD disc
DVD SVCD VCD CD
MPEG4
1. Press [ ] button and the unit begins fast forward playback.
Press [ ] button each time and the disc playback speed switches in the following sequence
circularly:
2. Press [ ] button and the unit begins fast backward playback.
Press [ ] button each time and the disc playback speed switches in the following sequence
circularly:
PLAY FROM THE DESIRED POSITION
When playing discs, you may select fast forward or fast backward playback to search a certain
point.
CDVCDSVCDDVD
MPEG4
FAST PLAYBACK
2X
16X32X
8X
4X
2X
16X32X
8X
4X
DVD OPERATION
24
Then press number button 6 to select Title 6, shown in the figure:
Title 06 /30 Chapter /02
2. Search title time
Press [GOTO] button until TV screen displays the following figure. Then press number buttons to
input hour, minute and second.
Title 06/30 Time : :
Finally press number button 2 to select Chapter 2, shown in the figure:
Title 06 /30 Chapter 02/02
Press [GOTO] button and TV screen displays:
Press [ ] button to move cursor and lighten the title number, shown in the figure:
Title 03/30 Chapter /02
Title /30 Chapter 01/02
3. Search chapter time
Press [GOTO] button until TV screen displays the following figure. Then press number buttons to
input hour, minute and second.
Chapter 01/04 Time : :
1. Search disc time
2. Search track time
Play SVCD, VCD and CD discs
Press [GOTO] button until TV screen displays the following figure. Then press number buttons to
input minute and second.
Disc Go To --:--
Press [GOTO] button until TV screen displays the following figure. Then press number buttons to
input minute and second.
Track Go To --:--
3. Select the track
1. Select track
2. Search track time
Play MPEG4 disc
Press [GOTO] button until TV screen displays the following figure. Then press number buttons to
input the track.
Select
Press [GOTO] button until TV screen displays the following figure. Then press number buttons to
input hour, minute and second.
-:--:--
DVD OPERATION
25
Select Track -- /15
Press [GOTO] button until TV screen displays the following figure. Press number buttons to input
track.
GOTO
MPEG4 AND JPEG FILE PLAYING
MPEG4 is the audio standard published by MPEG(Moving Pictures Experts Group) in
November,1998. As the discrepant parts between frames of picture are only processed and
the same parts are deleted, the data number are greatly decreased. The most distinct feature
of MPEG4 is the high compression and clear imaging. Furthermore, MPEG4 provides elastic
specifications to adjust the stream according to the used requirements. The larger stream can
be used when collecting private films; and the small stream can be used in network transferring,
which make MPEG4 use widely.
JPEG(Joint Photographic Experts Group) is the most widely used picture compression and
storage format today. Utilizing high efficiency compression algorithm, JPEG compresses the
original picture 15 to 20 times with excellent picture quality. JPEG is featuring small size data,
convenient application and supported by most picture processing software, so it is very fit to
store photos.
The strong decoding capability of this unit can decode and play the files with the above formats.
In the course of playing, an operation menu will appear and its construction is shown as follows.
2
DIR window
Display the current path.
Display the current state
information.
1
State window
4
Scroll bar window
Indicate the current file's position.
Display the current path's
file.
3
File window
5
Preview window
JPEG image preview.
6
Information window
Display the current operation
prompts.
The state information in state window is as follows:
4
00:57
002/073
03:31 128
2
1
3
5
6
Elapsed playback time
1
Total playback time
2
The audio bit rate (generally the bit rate is 128kbps,
sometimes it is VBR.)
3
Current playback mode indicator
4
Track indicator
5
6
Dynamic frequency spectrum indicator
00:00 00:00
004/369
\PIC\
Du000
Du001
Du002
..
1
2
3
4
5
6
DVD OPERATION
26
In Figure B, press [ ] button to select the MPEG4 format file you desired and press [OK]
button to confirm. The unit begins to play MPEG4 format movie.
After you put an MPEG4 format file into the unit, it will search disc information and display the
operation menu as figure A (The displayed content varies with disc.).
1. Play MPEG4 file
A:
00:00 00:00
\
Du000
Du002
Du001
Du003
001/004
B:
00:00 00:00
001/369
\Du000\
MP000
MP001
MP002
..
A/V
A/V
A/V
Press [ ] button to select the directory you desired and press [OK] button to confirm.
For instance, you select the directory Du000 in Figure A, press [OK] button and TV screen
displays as in Figure B. The window returns to the previous directory when you select [ ....]
or press [ ] button.
2. Play JPEG file
After you put an JPEG format file into the unit, it will search disc information and display the
operation menu as in the following figure. After selecting JPEG file, the preview window will appear
this file's preview image to facilitate you to select. After you select the JPEG file you desired and
press [OK] button to confirm, the picture will display in full screen.
00:00 00:00
004/369
\PIC\
Du000
Du001
Du002
RESOLUTION 640 480
..
DVD OPERATION
27
1. Press [ ],[ ] button may turn to the next or last page.
Other basic operation methods
Other functions of JPEG file
OK
DOWN
UP
SUBT
DVD MENU
NOTE
When buttons are invalid, TV screen displays:
Please press effective button again.
3. When in preview playback, pressing [DVD MENU] button may exit preview playback function.
2. When playing JPEG file, pressing [ ] button may realize preview playback function.
At the same time, all JPEG files are displayed on TV screen. One frame can display up to
12 pictures at most. The rest ones are shown on the next frame. Pressing [ ] button may
enter the next frame and [ ] button may enter the previous frame. You may press number
buttons or [ ] button to select the picture you desired and press [OK] button to confirm.
NUMBER
28
USAGE OF USB DEVICE AND 3 -IN-1 CARD READER
2. Play 3-in-1 CARD READER
USB jack
MEDIA CARD socket
CARD READER AND USB OPERATION
USB refers to Universal Serial Bus. Most of USB devices on the market are USB1.1 or USB2.0.
Here are some common types of USB 1.1 devices:
Monitors, Communication devices, Audio Human Input Device(HID), Mass storage drives etc.
Most flash memory ,USB HDD etc. belongs to Mass Storage Class. Mass Storage
Class includes 2 transport manners:
1. USB 1.1 Mass Storage Class Control/Bulk/Interrupt (CBI) Transport
2. USB 1.1 Mass Storage Class Bulk-Only Transport
This unit supports USB 1.1 Mass Storage Class Bulk-Only Transport.
When using USB 1.1 Mass Storage Class Bulk-Only Transport devices, please notice that
the file operation system only supports Windows FAT ,not support FAT32 and NTFS etc file
system.
The 3-in-1 card reader of this player can read SD Card (Secure Digital Card), MMC Card
(Multi Media Card) MS Card (Memory Stick Card).
Important: Before you use the USB or card reader function, you should
change the input source of the TV to DVD and press [CARD/DISK] button.
1. Using USB devices:
Please insert USB devices into the USB jack of this unit then press [CARD/DISK] button .
After correctly reading USB devices , the screen will display an operation menu.
Please refer to the part of "MPEG4 and JPEG FILE PLAYBACK" in page 25 for details.
In DVD mode, press [CARD/DISK] button, the TV set will to detect and read card.
If there are supported card in the card port ,after reading card data correctly, an operation
menu will be displayed on the screen.
If you want to switch to DVD state, please press [CARD/DISK] button to exit USB
and card read state.
RATIO
CARD/DISK DVD MENU
DOWN
PLAY
CARD/DISK
UP
29
NOTES
Press the effective button again.
CARD READER AND USB OPERATION
This player can play USB devices and MPEG4 and JPEG files in SD, MMC and MS cards.
When reading MPEG files with large size in USB device or media card, pause may appear.
If there is no files in USB devices or media card , on-screen appears a empty operation menu
to remind you that the device is empty. If USB devices or media card have a problem, or the
operation is incorrect, the screen appears "Device Error". Please check USB devices or media
card, or else unplug them then insert them again.
If a USB device or media card which are unsupported by the machine have been connected,
the unit may 'lock-up' and respond to commands. In this event please switch off the power,
take out USB equipment or media card, and then switch the power back on to reset the machine.
don't
This unit does not support USB On The Go (OTG) technology, so any deviceswith OTG
data exchange mode may not work correctly. Check this out before operation.
When inserting a media card, you should insert it in the right direction: If you are facing the
TV screen, make sure you plug-in the card with its connector facing away from you.
When the button is invalid, the TV screen displays:
1. Down mix mode: this item is used to set this unit's DOWN MIX mode to change multi channel
audio into 2-channel audio output.
Optional settings: LT/RT, Stereo; Default: Stereo
1. TV Display: This item is used to set the output picture ratio of this unit.
Optional settings: Normal/PS, Normal/LB, Wide, Wide Squeeze; Default: Wide.
2. OSD language: This item is used to set the OSD language .
Optional settings: English; Default: English
30
3. Screen Saver: Open or close the screen saver.
Optional settings: On, Off; Default: On
DVD FUNCTION SETUP
4. Last Memory:
This player can save the currently played time point automatically when you
leave the current DVD disc playback (switch from DVD to card read state, switch from DVD
signal source to other signal source, enter standby state in DVD mode).
NOTE
When switching to DVD playback state again, this player can automatically search the time point
saved last time to continue playing. If you want to play from the beginning, please press [STOP]
button twice and then press [PLAY] button.
GENERAL SETUP
AUDIO SETUP
General Setup Page
Last Memory
On
Screen Saver
TV Display
Wide
OSD Lang
ENG
Go To General Setup Page
On
Audio Setup Page
3D Processing
HDCD
Down mix
STR
Equalizer
Dolby Digital Setup
Go To Audio Setup Page
Optional settings: On, Off; Default: On
2. Dolby Digital Setup:
Dolby Digital Setup
Dual Mono (1+1) Setup
Dynamic
L-Mono
Dual Mono STR
Stereo
R-Mono
Mix-Mono
DVD FUNCTION SETUP
31
4. 3D Processing: Set reverberation mode .
5. HDCD: Set filter mode.
Optional settings: Off, Concert, Living Room, Hall, Bathroom, Cave, Arena, Church; Default: Off.
Optional settings: Off,1X, 2X; Default: 1X.
Treble Boost: Enhance high frequency sound level, optional settings: On, Off; default: Off.
Super Bass: Enhance very low frequency sound level, optional settings: On, Off; default: Off.
Dual Mono:
Dynamic:
Optional settings: Stereo, L-Mono, R-Mono, Mix-Mono ;Default: .Stereo
Set Dolby digital sound dynamic level, Default: Off
3. Equalizer :
EQ Type: Set equalizer type, optional settings: None, Rock, Pop, Live, Dance, Techno, Classic,
Soft; Default: None.
Bass Boost: Enhance low frequency sound level, optional settings: On, Off; default: Off.
Equalizer Page
Select Equalizer Type
Bass Boost
EQ Type None
None
Pop
Live
Dance
Techno
Classic
Soft
Off
Super Bass
Treble Boost
Off
Off
Rock
2. Brightness: This item is used to set the brightness of video outputs.
1. Sharpness: This item is used to set the sharpness of video outputs.
Optional settings: High, Medium, Low; Default: Med.
4. Gamma: This item is used to set the color temperature of video output.
Optional settings: High, Medium, Low, None ; Default: None
5. Hue: This item is used to set the hue of video outputs.
3. Contrast: This item is used to set the contrast of video outputs.
6. Saturation: This item is used to set the saturation of video outputs.
VIDEO SETUP
Video Quality Setup
Hue 00
Saturation 00
Sharpness
Med
Contrast
00
Brightness
00
Go To Video Setup Page
Gamma
None
DVD FUNCTION SETUP
1. TV Type: To set the output video system of this player.
Optional settings: PAL, Auto, NTSC; Default: PAL.
2. PBC: To set the PBC status.
Optional settings: On, Off; Default: On
When playing SVCD, VCD2.0 discs, if PBC is set On, this unit enters PBC playback mode; if PBC
is set Off, the unit plays the disc according to track sequence.
PREFERENCE SETUP
Preference Page
Disc Menu ENG
Parental
Audio
ENG
PBC
On
TV Type
PAL
Go To Preference Page
Subtitle
ENG
Country Region ENG
Default
Off
5. Disc menu : This item is used to set the preference disc menu language when
playing.
Default of disc menu language: English
3. Audio: This item is used to set the preference audio language when playing.
4. Subtitle: This item is used to set the preference subtitle language when playing.
32
When changing the parental control ratings, a password is needed. Please refer to the
following password item for details.
8. Default: This item is used to restore all settings to the default value except "Parental control"
and Password" in the setup menu."
6. Parental: this item is used to set the parental control ratings to prevent children from
watching the restricted contents. (In case the disc supports this function)
Optional settings: KID SAFE, G, PG, PG 13, PGR, R, NC17, ADULT, Off; Default: Off
NOTE
NOTE
Audio, subtitle and disc menu language are only effective to DVD disc.
If the disc is not recorded with the language you appointed, the unit will apply the language
that the disc appointed to play.
Select other languages: press [ ] button to move cursor to "OTHER" item, press [OK] button
and then number buttons to input the language code you desired. After input finishes, press
[OK] button again.
7. Country Region: Set the country region according to your country.
DVD FUNCTION SETUP
Password : This item is used to set a four digital password to enable you to change the
parental control ratings.
Password Mode: To set whether parental control function need a password, optional setting:
On, Off; Default: On.
PASSWORD SETUP
Password : To change the password of parental control function, default :000000.
33
Password Setup Page
Password Mode
On
Password
Go To Password Setup Page
DVB FUNCTION SETUP
Turn on this TV, press [SOURCE] button to change source to DVB, then you can enjoy the
rich and colorful contents of Digital Video Broadcast!
In DVB mode, press [SETUP] button, then press [ ] button to choose DVB item, the DVB
setup menu will be displayed as follow:
34
General Setup Page
TV Display
Wide
OSD Lang
ENG
Go To General Setup Page
DVB
TV Type
PAL
Default
GENERAL SETUP
1. TV Display: This item is used to set the output picture ratio of this unit.
Optional settings: Normal/PS, Normal/LB, Wide, Wide Squeeze; Default: Wide.
2. OSD language: This item is used to set the OSD language .
Optional settings: English; Default: English
3. TV Type: To set the output video system of this player.
Optional settings: PAL, Auto, NTSC; Default: PAL.
4. Default: This item is used to restore all settings to the default value except "Parental control"
and Password" in the setup menu."
VIDEO SETUP
Video Quality Setup
Hue 00
Saturation 00
Sharpness
Med
Contrast
00
Brightness
00
Go To Video Setup Page
Gamma
None
DVB
2. Brightness: This item is used to set the brightness of video outputs.
1. Sharpness: This item is used to set the sharpness of video outputs.
Optional settings: High, Medium, Low; Default: Med.
4. Gamma: This item is used to set the color temperature of video output.
Optional settings: High, Medium, Low, None ; Default: None
5. Hue: This item is used to set the hue of video outputs.
3. Contrast: This item is used to set the contrast of video outputs.
6. Saturation: This item is used to set the saturation of video outputs.
DVB FUNCTION SETUP
DVB- T Setup Page
Channel setup
Area
ENG
Parental Age
Time Zone
Go To DVB - T Setup Page
DVB
Dis
DVB-T SETUP
The DVB-T Setup Page is composed of four parts: Area, Time Zone, parental Age, Channel
Setup.
Optional settings: Australia, Austria, Belgium, Denmark, Estonia, Germany, Spain, France,
Italy, Netherland, Taiwan, UK, Others; Default: UK.
Note : you must set the correct area before searching channels
You can choose the area of your country.
1. Area
To choose your time zone, it is set depending on your country. If you know the exact
time, please ask local time manage department.
Default: 00:00
don't
2. Time zone
This item is used to set the parental control ratings .To prevent your children watching
undesired programme.
Optional settings: 4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,Disable
Default: Disable
3. Parental age
4. Channel setup
This item is used to search channels, edit the channel list or your favourite channel list,
viewing program guide information, etc.
35
Note : Press [ ]button to select different item , and press [OK] or [ ] button to enter it.
Press [ ] button to return to the previous menu or to exit the current menu .
Channel Setup
Channel Remap
Auto Scan
Start
Adjust Channel
Manual Scan
Auto Scan
DVB
Reserve Channel
36
Press [DVD MENU]on remote control more than 3 seconds to auto scan.
1.press [setup] button to enter setup menu, then choose the DVB item;
2. Using the [ ] button to select the Auto Scan item, and press [OK] or [ ] button
to select Start item, then press [OK] button;
3.A prompting message will be displayed to request your confirm, select OK and press the
[OK] button to confirm.
In the scan process, the scan result will be displayed in the Auto Scan window.
DVB FUNCTION SETUP
Note: If you press the [setup] button during scanning, the operation is stopped and a prompting
message will be displayed at the bottom of Auto Scan window. Select OK and press [OK] button to
abort auto scan operation, and the channels found until then will be saved. And select Cancel and
press [OK] button to return to auto scan process.
Wait while the TV searches for the channels, this may take a few minutes.
Note: Once you press [OK] button to start auto search operation, all the saved channels will be
cleared.
You can scan channels manually by setting scan parameters.
1.In setup menu, select the Manual Scan ,a manual scan will be shown as follows:
2.Enter the frequency you want to scan by the number buttons, then press ok, the scan
button seems be pressed, press OK again to scan, a scan sign : scanning... will be shown
on the window.
3.The scan result will be displayed on the right half of the manual scan window, you can save
the founded channels or give up them if the TV found some program.
Manual scan
40%
Auto Scan
Freq: 65000KHz
TV Total: 00
Radio Total: 00
Progress:
Status Found Channels
Adjust channel
You can set your favorite channel, set parental control age for some channels or delete
channel in Adjust Channel window.
1.Select channel using [ ] button , Press [RED] button to set this channel as one of your
favorite channel.
Auto Scan
Connect the antenna to the RF socket on the TV, if the antenna need power supply, please
press [ANT. ON/OFF] button to turn on the power for the antenna . Then you can automatically
search channels without entering any other information.
Manual Scan
Freq: 177500KHz
Press OK to Scan
Status Found Channels
Scan
You can set the time when the reminding signal should be displayed before the program
played.
When playing a program in a channel, press [EPG] button, then a program information list
of current channel will be displayed in a window, move the cursor to PROGRAM, then press
[OK] button, a more detailed program list will be displayed, move the cursor to the program
which you want to watch, then press green button in last row on remote control as shown
in the window. The program is saved in your reserved channel.
37
DVB FUNCTION SETUP
You can change every channel position as you like in channel remap window.
If you want to watch a special program in a channel played some time later, you can reserve
it. Then a reminding signal will be displayed on screen several minutes before it played.
Channel remap
Reserve channel
DVB
Tenestrial
EPG
Press OK to Scan
002 FlowerGd 4Mbs
Channel FlowerGd 4Mbs
Program
DVB
Notify time
OK
03 min
2.Select channel using [ ] button , if you don't like this channel press [GREEN] button
to delete it .
3.Select channel using [ ] button, press [YELLOW] button to set this channel as a
protected one, to from your children to watch the undesied program in it.
Note: If you set channel protected, password need to be input in Protect Channel window.
The default password is 000 000.
FM OPERATION
38
With radio decoder built in , you can enjoy radio programs using this unit.
Connect the FM antenna in the accessories to the to the FM socket on the left panel of the TV,
change source to FM. Press [SETUP] button and a menu will show as follows:
FM
NOTE
Up to 20 programs can be preset/stored,and you can recall them in 2 ways:
For programs 1 ~ 9, press the number buttons on remote control to access them.
For programs 10 ~19, press "-/--" first ,then press "0 ~ 9" to access to them;
For channel 20, just press "-/--" twice to access to it.
FM
MANUAL SEARCH
AUTO SEARCH
SELECT
RETURN
SETUP
ENTER
OK
FREQUENCY
CHANNEL
12
101.20MHz
1. CHANNEL:
Display current channel number, press [ ] button to change channel.
2. FREQUENCY:
The frequency of current channel, press [ ] button to adjust it (one step is 0.1MHz).
3. MANUAL SEARCH:
Search a new channel for current channel number, press [ ] button to decrease frequency and
press [ ] button to increase frequency. When a channel is found, manual search will stop and the
program will be stored.
4. AUTO SEARCH:
Search and store all the channels in FM band 87.5--108MHz. Move the cursor to AUTO SEARCH
,it become high bright, then press [OK] or [ ] button to auto search.
Press [SETUP] button to give up AUTO SEARCH.
Method 1:
Method 2:
Press [ ] button to decrease channel and press [ ] button to increase channel.
Cant change channel by press [CH+/-] button in FM mode.
FM OPERATION
SYSTEM
In FM setup menu, select " ", a FM system menu will be displayed as follows:
39
SYSTEM
SLEEP
SELECT
RETURN
SETUP
ENTER
OK
TRANSPARENCY
LANGUAGE
ENGLISH
LEVEL 3
OFF
1. LANGUAGE
Set FM setup menu language. For English, only English.
2. TRANSPARENCY
Set the transparency level of FM setup menu, optional settings : OFF--LEVEL 6.
3.SLEEP
Set the time of how long the TV to go to standby mode automatically. optional settings:
OFF--240MIN,10 minutes a step.
Please check for causes of problems in accordance with the following chart before contacting
any maintenance personnel.
Cannot power on
Please make sure the well connecting of power cord
No sound
Please make sure the well connecting of audio cord
Check volume
Volume too low
Check volume
If volume is still too low when adjusting volume to maximum,
please check whether the input device is well set
Input antenna damaged or not well connected
Remote control failure
Check whether remote control battery used up
Whether battery installation is correct
Whether obstacles exists between remote control and the
unit's receiving window
Check whether there is strong light around the receiving
window.
Symptom
Causes and Correction
TROUBLESHOOTING
TV TROUBLESHOOTING
Snowy picture
40
Make sure there is nothing plugged in the headphone jack
If the above methods still cannot solve the problems or the troubles are special,
please contact the local maintenance personnel.
Symptom
Causes
Correction
No sound
1. Disc warped or dirty
2. The unit in mute state
1. Clean the disc
2. Press MUTE button to cancel it.
No image
1. TV not set for proper system
1. Reset AV/TV state of TV
No color
1.
2.
TV system not right
TV color not well adjusted
1. Set the TV color system according to the
disc color system
No disc reading
1. Disc warped or dirty
2. Disc not correctly placed
3. Condensation on laser head
1. Clean the disc
2. Reload a disc with label side facing up
3. Witch on power, unload disc and leave
it for about 1 hour
Temporary
function failure
1. Mal-fabricated disc used
2. Wrong buttons pressed
3. Static leakage into the play from
outside
1. Change disc
2. Operate again
3. Power off for 1 to 2 minutes then power
on again
Image rolling
1. System setup not suitable
for disc
1. Adjust system mode
1. Condensation on laser head
2. Disc not properly loaded
3. Disc not compatible with the unit
1. Switch on power and wait for 1 to 2 hours
2. Make sure label side of the disc facing up
3. Confirm whether this unit compatible with
the placed disc
Sound distortion
1. Too large volume of connected
device
2. Sound field mode not suitable for
disc
1. Adjust the device volume
2. Adjust appropriate sound field
No subtitle
1. No subtitle made in disc
2. The unit subtitle is turned off
1. Disc problem
2. Press SUBT button to select it
TROUBLESHOOTING
41
Can t play
2. In backlight off mode 2. Press [B.L.ON/OFF] button
DVD TROUBLESHOOTING
2. Reset the TV color
42
Battery pack Lithium rechargeable battery 5000mAH, 7.4V
Input connector
Frequency range (VHF/UHF)
Channel range(VHF/UHF)
IEC-Type, IEC 169-2, Female
174MHz~858MHz
7 & 8 Mhz
FM
FM frequency range
87.5MHz~108MHz
FM antenna
RF
DISPLAY MODE
Ver scanning frequencyHor scanning frequency
SUPPORTED VIDEO INPUT MODE
Format
Vert scan type
720X480 31.47 59.94 480P
720X480
15.734
59.94 480i
720X576
31.25
50 576P
720X576 15.625 50 576i
Specifications and design are subject to change without notice.
NOTE
43
Please check the following accessories.
User manual
Automotive Power socket adapter
Remote control and battery
Power adapter
Operational Manual
ACCESSORIES
Battery pack (optional)
Headrest bracket(optional)
Headphone
Bag (optional)
AV cord
FM antenna
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Avtex W102D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Avtex W102D in de taal/talen: Engels als bijlage per email.

De handleiding is 11,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info