300716
37
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
IP Office 3.2
4610 and 5610 User Guide
[15-601080] Issue [3] (5 June 2006)
© 2006 Avaya Inc. All Rights Reserved.
Notice
While reasonable efforts were made to ensure that the information in this document was complete and accurate at the time of
printing, Avaya Inc. can assume no liability for any errors. Changes and corrections to the information in this document may be
incorporated in future releases.
Documentation Disclaimer
Avaya Inc. is not responsible for any modifications, additions, or deletions to the original published version of this documentation
unless such modifications, additions, or deletions were performed by Avaya.
Link Disclaimer
Avaya Inc. is not responsible for the contents or reliability of any linked Web sites referenced elsewhere within this
Documentation, and Avaya does not necessarily endorse the products, services, or information described or offered within
them. We cannot guarantee that these links will work all of the time and we have no control over the availability of the linked
pages.
License
USE OR INSTALLATION OF THE PRODUCT INDICATES THE END USERS ACCEPTANCE OF THE TERMS SET FORTH
HEREIN AND THE GENERAL LICENSE TERMS AVAILABLE ON THE AVAYA WEBSITE AT
http://support.avaya.com/LicenseInfo/ (GENERAL LICENSE TERMS). IF YOU DO NOT WISH TO BE BOUND BY THESE
TERMS, YOU MUST RETURN THE PRODUCT(S) TO THE POINT OF PURCHASE WITHIN TEN (10) DAYS OF DELIVERY
FOR A REFUND OR CREDIT.
Avaya grants End User a license within the scope of the license types described below. The applicable number of licenses and
units of capacity for which the license is granted will be one (1), unless a different number of licenses or units of capacity is
specified in the Documentation or other materials available to End User. Designated Processor means a single stand-alone
computing device. Server means a Designated Processor that hosts a software application to be accessed by multiple users.
Software means the computer programs in object code, originally licensed by Avaya and ultimately utilized by End User,
whether as stand-alone Products or pre-installed on Hardware. Hardware means the standard hardware Products, originally
sold by Avaya and ultimately utilized by End User.
License Type(s): Designated System(s) License (DS).
End User may install and use each copy of the Software on only one Designated Processor, unless a different number of
Designated Processors is indicated in the Documentation or other materials available to End User. Avaya may require the
Designated Processor(s) to be identified by type, serial number, feature key, location or other specific designation, or to be
provided by End User to Avaya through electronic means established by Avaya specifically for this purpose.
Copyright
Except where expressly stated otherwise, the Product is protected by copyright and other laws respecting proprietary rights.
Unauthorized reproduction, transfer, and or use can be a criminal, as well as a civil, offense under the applicable law.
Third-Party Components
Certain software programs or portions thereof included in the Product may contain software distributed under third party
agreements (Third Party Components), which may contain terms that expand or limit rights to use certain portions of the
Product (Third Party Terms). Information identifying Third Party Components and the Third Party Terms that apply to them is
available on Avayas web site at: http://support.avaya.com/ThirdPartyLicense/
Avaya Fraud Intervention
If you suspect that you are being victimized by toll fraud and you need technical assistance or support, call Technical Service
Center Toll Fraud Intervention Hotline at +1-800-643-2353 for the United States and Canada. Suspected security vulnerabilities
with Avaya Products should be reported to Avaya by sending mail to: securityalerts@avaya.com.
For additional support telephone numbers, see the Avaya Support web site (http://www.avaya.com/support).
Trademarks
Avaya and the Avaya logo are registered trademarks of Avaya Inc. in the United States of America and other jurisdictions.
Unless otherwise provided in this document, marks identified by “®, “™” and
SM
are registered marks, trademarks and service
marks, respectively, of Avaya Inc. All other trademarks are the property of their respective owners.
Documentation information
For the most current versions of documentation, go to the Avaya Support web site (http://www.avaya.com/support) or the IP
Office Knowledge Base (http://marketingtools.avaya.com/knowledgebase/).
Avaya Support
Avaya provides a telephone number for you to use to report problems or to ask questions about your contact center. The
support telephone number is 1- 800- 242- 2121 in the United States. For additional support telephone numbers, see the Avaya
Web site: http://www.avaya.com/support.
4610 and 5610 User Guide Page iii
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Table Of Contents
The Telephone............................................................................................................................1
About this Guide.......................................................................................................................................1
Overview ..................................................................................................................................................1
Call Appearance Keys..............................................................................................................................3
Call Appearance Key Icons ......................................................................................................................4
The Display ..............................................................................................................................................5
System Features ......................................................................................................................................6
Basic Call Handling Features....................................................................................................7
Answering a Call ......................................................................................................................................7
Making a Call............................................................................................................................................8
Clearing a Call..........................................................................................................................................8
Headset Working......................................................................................................................................9
Speakerphone........................................................................................................................................10
Speed Dial..............................................................................................................................................10
Redial.....................................................................................................................................................11
Mute.......................................................................................................................................................11
Hold........................................................................................................................................................12
Transfer..................................................................................................................................................13
Conference.............................................................................................................................................14
Using Speed Dials....................................................................................................................15
Overview of Speed Dials ........................................................................................................................15
Dialling a Speed Dial Number.................................................................................................................15
Adding a Speed Dial from the Call Log...................................................................................................16
Editing a Speed Dial...............................................................................................................................16
Deleting a Speed Dial.............................................................................................................................16
Adding a New Speed Dial.......................................................................................................................17
Using the Call Log ...................................................................................................................19
Overview of the Call Log ........................................................................................................................19
Accessing the Call Logs .........................................................................................................................20
Displaying an Individual Log Entry..........................................................................................................20
Making a Call from an Individual Log entry.............................................................................................21
Turning a Log Entry into a Speed Dial....................................................................................................21
Deleting an Individual Log Entry.............................................................................................................21
Deleting All Entries from a Log ...............................................................................................................22
Exiting the Call Logs...............................................................................................................................22
Changing Options....................................................................................................................23
Personal Ringing....................................................................................................................................23
Viewing IP Settings ................................................................................................................................24
Display Contrast.....................................................................................................................................25
Logging Off.............................................................................................................................................25
Changing Feature Key Labels ................................................................................................................26
Displaying Language Selection ..............................................................................................................27
Phone Screen on Answer.......................................................................................................................27
Phone Screen on Calling........................................................................................................................28
Display Call Timers ................................................................................................................................28
Message Display Rate............................................................................................................................28
Visual Alerting ........................................................................................................................................29
Function Keys .......................................................................................................................... 30
Overview of the Function Keys...............................................................................................................30
Function Key Programming....................................................................................................................31
Shorthand Programming Mode...............................................................................................................33
Longhand Programming.........................................................................................................................34
4610 and 5610 User Guide
4610 and 5610 User Guide Page iv
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
System Features ...................................................................................................................... 35
Introduction ............................................................................................................................................35
Making Calls...........................................................................................................................................35
Answering Calls......................................................................................................................................36
Call Waiting............................................................................................................................................36
Call Forwarding ......................................................................................................................................37
Diverting Calls........................................................................................................................................37
Do Not Disturb........................................................................................................................................38
Voicemail................................................................................................................................................38
Default Feature Codes ...........................................................................................................................39
Management and Troubleshooting ........................................................................................41
Overview ................................................................................................................................................41
Testing Your Phone................................................................................................................................41
Troubleshooting Chart............................................................................................................................42
Index..........................................................................................................................................43
4610 and 5610 User Guide Page 1
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
The Telephone
About this Guide
This guide describes how to use all the features on your Avaya IP Office 4610/5610 phone.
For basic phone settings and functionality, refer to the relevant Quick Reference Guide for your IP Office
phone.
Further information about IP Office is available from www.avaya.com/support and also from
www.avaya.com/ipoffice/knowledgebase.
Overview
This guide covers the use of the 4610 and 5610 phones on IP Office. These phones are physically
similar, however the 5610 is only supported on the IP Office whereas the 4610 is supported on a range
of Avaya phone systems.
The diagram below shows the main phone features:
1. Display, Call Appearance and Feature Buttons:
The Call Appearance keys allow you to handle multiple calls with the display showing call
information. There are 4 pages in the display; giving up to 24 system features that can be
allocated to the function keys. The information displayed varies according to the active feature.
4610 and 5610 User Guide
4610 and 5610 User Guide Page 2
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
2. Message Waiting Lamp: Used as follows:
On (Continuous): There are new messages in your voicemail mailbox, or in another
mailbox for which you have been configured to receive "Message Waiting Indication".
Flashing: The lamp can also be set to flash when the phone receives a call. See Visual
Alerting.
3. Softkeys:
Used to navigate to or initiate certain features, such as Speed Dial or Call Log, as well as control
certain actions within the features. These keys correspond to the text prompts in the display
screen immediately above them.
4. Page Right/Left:
Shifts from one page to another in the same application when the display presents the paging
indicator ( ). These buttons have no effect when the paging indicator is not displayed.
5. Options:
Displays the Options main screen, from which display and application settings can be updated
6. Call Handling Buttons:
Hold:
Red button used to place a call on hold.
Transfer:
Transfers a call to another phone.
Conference:
Sets up conference calls with more than one other person.
Drop:
Drops the current call or, if on a conference call, drops the last person to join the
conference.
Redial:
Redials the last number dialed or displays the last 6 numbers dialed from the phone,
depending on configuration via the Options menu.
7. Numeric (dialling) Pad:
Standard 12 button pad for dialling phone numbers.
8. Volume Controls:
Adjusts the handset, speaker, headset, or ringer volume, depending on which item is in use. As
you increase or decrease the volume, the top display area provides either a speaker, headset,
handset, or ringer icon to indicate for which item you are adjusting volume, followed by a visual
volume meter showing the volume level. These buttons also control the volume of the key click
sounds made when you press fixed buttons on the phone, such as the dial pad or soft keys.
9. Mute and LED Indicator:
Turns off the active speaker, handset, or headset microphone to prevent the other person from
hearing you. The associated LED lights steadily when the handset or headset is muted.
10. Headset and LED Indicator:
With a headset connected, changes audio control from the handset or speaker to the headset.
The associated LED lights steadily when the headset is active.
11. Headset Jack:
Located on the side of the phone and provides a port for connecting a headset.
12. Speaker and LED Indicator:
Accesses the Speaker feature. The associated LED lights steadily when the Speaker is active.
13. Phone/Exit:
Displays the phone application main screen or, if applicable, exits the current IP Office based
feature, such as Speed Dial or Call Log, and normalizes the display.
The Telephone
4610 and 5610 User Guide Page 3
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Call Appearance Keys
Normally, the first page of the main call handling screen contains three keys set as 'call appearance'
keys. These are allocated to you by your system administrator and are indicated as a=, b= and c=.
Your system administrator can allocate a call appearance key with:
A Bridged Appearance
A bridged appearance key matches the status and operation of the Call Appearance key on a
pre-defined colleagues phone. Hence, you can pick-up, make and receive calls on behalf of your
colleague.
A Line Appearance
An IP Office exchange line (but not IP lines) can be allocated to you such that the status of that
line is displayed and you can use the line appearance key to make and receive calls.
Call Coverage Appearance
A call coverage appearance key alerts you when a pre-defined colleague is receiving a call. The
covered user does not need to be using call appearance keys. Hence, you can pick-up calls on
behalf of your colleague.
For details of Bridged, Line and Call Coverage Appearance Keys set-up and their operation, refer the IP
Office Key and Lamp Operation manual.
Having more than two Call Appearance keys is very useful. When holding a call, you can answer or
make another call and then switch between calls, transfer or conference. If you are set to receive call
waiting indication, the waiting call is shown against the next call appearance key.
Note
If your phone is operating in single line mode, call appearance keys are not available.
Caution
Although the system administrator can replace the Call Appearance keys with Bridged, Line and Call
Coverage Appearance keys, this would severely restrict the use of features such as conference and
transfer.
It is for this reason that it is strongly recommended that all Call Appearance keys remain at their
default settings.
4610 and 5610 User Guide
4610 and 5610 User Guide Page 4
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Call Appearance Key Icons
The icons displayed against the Call Appearance/Feature keys allow you to determine the status (for
example, on Hold) of each call. Icons also indicate whether a feature has been activated for a particular
button.
Incoming Call:
A symbol next to a call appearance key indicates an incoming call. To answer the call and put
any other current call on hold, press the adjacent .
Connected:
A symbol next to a call appearance key indicates that it is the currently connected call. The
caller's phone number (if available) is also shown. To put the call on hold, press the adjacent
. An H is displayed.
On Hold:
A symbol next to a call appearance key indicates a call on hold. To take the call off hold and
put any other current call on hold, press the adjacent .
Function Active:
The feature is highlighted on the display.
The Telephone
4610 and 5610 User Guide Page 5
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
The Display
B Phone Locked:
Internal calls only.
D Call Forwarding On:
See Call Forwarding.
G In Group:
You can enable/disable group membership.
H Held Call:
Shows the number of held calls. See Hold.
N Do Not Disturb On:
See Do Not Disturb.
0 Out of Hours:
This is displayed if one or more Hunt Groups is in "Out-of-Hours" mode.
P Parked Calls:
Shows the number of parked calls.
U Unavailable:
This is displayed on the calling station when the called station has Do Not Disturb activated,
but is not being covered by voicemail.
V Voicemail:
This is displayed on the calling station when the called station has Do Not Disturb activated,
but is being covered by voicemail. See Voicemail.
01 Calls in Call History:
The phone can store and display recent calls.
DISC Disconnected:
To end the call, press Speaker.
CONN Connected:
You are on a call.
CONF Conference Call:
You are part of a conference call, displayed on the left hand side of the display. See
Conference Calls.
Indicates that the displayed item is the currently selected item.
Note
The items displayed by your IP phone may differ slightly from the items listed above.
4610 and 5610 User Guide
4610 and 5610 User Guide Page 6
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
System Features
System Features can only be set against soft function keys by your system administrator. However,
your system administrator may allocate you two self administrator features that will enable you to add
System Features to your soft function keys. Refer to Overview of the Function Keys for details of the
System Feature that can only be allocated to you by your system administrator.
In addition, there are a number of System Features that you can always access yourself by the use of
short codes. Refer to System Features Introduction for details of System Features that you can always
access yourself by dialling short codes. For example, to listen to your voicemail messages, dial *17.
4610 and 5610 User Guide Page 7
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Basic Call Handling Features
Answering a Call
When a call arrives at your phone, you may hear a ringing tone and a blinking bell icon ( ) icon appears
against the associated call appearance key.
To answer an incoming call:
Do one of the following:
If you are not active on another call, answer the call using your handset, headset, or
speakerphone. See Speakerphone.
or
If you are active on a call already, place the active call on hold (see Hold), and then answer the
incoming call by selecting the call appearance key.
or
If the call appearance for the ringing call is not displayed on the current screen page, press
Phone/Exit to return to the first page of the Home screen. When you locate the call
appearance for the ringing call, press the corresponding call appearance button.
Note
To redirect an incoming call, press Drop to redirect the call to Forward On No Answer (if set) or
voicemail (if available).
4610 and 5610 User Guide
4610 and 5610 User Guide Page 8
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Making a Call
You can make calls from the phone using a variety of methods as follows:
To manually make a call:
1. Dial the required number on the key pad. Remember to include the required access code (for
example; 9 for an outside line) and listen to the progress of the call.
2. Adjust the speakerphone volume as necessary. To change the volume, press and . The
eight volume levels are displayed.
3. If the call is not answered, press Speaker or press Drop.
or
When the call is answered, either speak or pick up the handset and speak to the called party.
To automatically make a call:
Do any of the following:
To have the phone dial the last number that you dialed, press Redial and then press .
or
Access the Call Log and initiate a call to a specific entry.
or
Access the Speed Dial List in your personal directory and initiate a call to a specific entry. See
Dialling a Speed Dial Number.
When the call is answered, either speak or pick up the handset and speak to the called party.
Clearing a Call
To clear an established call:
Either
Replace the handset.
or
Press Drop.
Basic Call Handling Features
4610 and 5610 User Guide Page 9
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Headset Working
When a headset is to be used on your phone, it must be plugged in to the headset socket on the base of
the phone. To activate the headset and switch off the handset, press Headset. The lamp beside the
button is illuminated when headset working is activated.
To answer an incoming call:
Press next to the flashing bell icon ( ).
To clear a headset call:
Press Drop.
To manually make a call:
Dial the number. Remember to include the required access code (for example; 9 for an outside
line) and listen to the progress of the call.
To automatically make a call:
Do any of the following:
To have the phone dial the last number that you dialed, press Redial and then press .
or
Access the Call Log and initiate a call to a specific entry.
or
Access the Speed Dial List in your personal directory and initiate a call to a specific entry. See
Dialling a Speed Dial Number.
When the call is answered, speak to the called party.
4610 and 5610 User Guide
4610 and 5610 User Guide Page 10
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Speakerphone
The two-way built-in speakerphone allows you to make and answer calls without lifting your handset.
Keep in mind that two-way speaker phones may not operate satisfactorily in every environment (such as
in very noisy locations) and that they operate best when you speak directly too them.
To make or answer a call without lifting the handset, or to use the speakerphone with any
feature:
1. Press Speaker. The LED beside the button illuminates.
2. Make or answer the call, or access the selected feature.
3. Adjust the speakerphone volume if necessary. To change the volume, press and . The
display shows the eight volume levels.
To change from the speakerphone to the handset:
Pick up the handset and talk.
To change from the handset to the speakerphone:
1. Press Speaker. The LED beside the button illuminates.
2. Hang up the handset.
To end a speakerphone call:
Press Speaker again. The LED beside the button goes out.
Speed Dial
The Speed Dial feature allows you to have the phone automatically dial calls to phone numbers stored in
your personal directory. See Dialling a Speed Dial Number.
To make a call to a personal directory entry using the Speed Dial feature:
1. From the Home screen, press SpDial. The Speed Dial screen is displayed.
2. Press the button next to the entry you want to call.
3. If the entry you want is not displayed, press and to search through the entries.
or
Key the first letter of the required name to jump to the page with a matching entry.
The phone dials the number for you.
Basic Call Handling Features
4610 and 5610 User Guide Page 11
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Redial
The Redial feature automatically redials a previously dialed extension or outside number (up to 24
digits). If you have dialed the same number twice in succession, it will only have one appearance in the
redial list.
To redial the last number that you dialed:
Press Redial. If several numbers are shown, press adjacent to the required number.
To change Redial:
1. Press Options and then press Application Options.
2. Press Redial. It will toggle between Last Number and Last 3 Numbers.
3. Press Save.
Mute
During an active call, the Mute feature prevents the party with whom you are speaking from hearing you.
This feature is most commonly used in conjunction with the Speakerphone, but can be used to hold an
off-line conversation at any time during a call.
To prevent the other person on the line from hearing you:
1. Press Mute. The other party cannot hear you. The indicator next to the Mute button lights
when mute is active.
2. To reinstate two-way conversation, press Mute again.
4610 and 5610 User Guide
4610 and 5610 User Guide Page 12
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Hold
If, with a call in progress, a second call arrives and is shown against a Call Appearance key, you can
then hold the first call and answer the second call.
To put an existing call on hold:
1. Press Hold or press with against it. changes to ; showing that the line is on hold.
2. To answer the second call, press with against it. changes to ; showing that the line is
connected.
To return to the held call:
1. If you have a call in progress, then first put that call on hold (as above).
2. To retrieve a held call, press with against it.
Notes
After a pre-set time (defined by your system administrator), you are reminded that you have a call on
hold by changing for a few moments to and the phone ringing.
If the system feature AutoHold is on (consult your system administrator) then you can hold an active
call ( ) by pressing the second calls Call Appearance button ( ). If AutoHold is off, then pressing the
second calls Call Appearance button ( ) will drop the first call.
To transfer a held call see Transfer.
Basic Call Handling Features
4610 and 5610 User Guide Page 13
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Transfer
The Transfer feature allows you to transfer a call from your phone to another extension or outside
number.
To transfer the current call to another extension:
1. With a call in progress, press Transfer.
2. When you hear dial tone, dial the number to which the call is to be transferred.
3. Do one of the following:
To transfer the call without announcing it, press Transfer again. The transfer is
complete.
or
To announce the call before transferring it, wait for the called party to answer. If the called
party is willing to accept the call, press Transfer again to complete the transfer.
or
If the called party does not wish to accept the call, press Drop. To return to the held
call, press adjacent to it.
or
If the line is busy or if there is no answer, press Drop. To return to the held call, press
adjacent to it.
To transfer a held call to another extension:
1. When a call is in progress and another call arrives, press Hold and answer the second call.
2. To transfer the new call to the held call, press Transfer and dial the number of the held call
3. To complete the transfer, press Transfer again.
4610 and 5610 User Guide
4610 and 5610 User Guide Page 14
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Conference
The Conference feature allows you to conference other parties (including yourself) into a call.
Notes
The number of parties allowed in a conference is controlled by your phone system.
Two Call Appearance keys are required for the conference feature.
To add another party to a call:
1. With a call in progress, press Conference. The existing call is put on hold.
2. Dial the number of the person you want to add to the call.
3. Wait for an answer.
If the called party does not answer or does not want to join the conference, press Drop. To
return to the held call, press adjacent to the held call.
4. To add the person to the call, press Conference again.
5. Repeat steps 1 through 4 for additional conference connections.
To add a held call(s) to an active call:
Press Conference. All held calls are added to the conference.
Notes
To leave a conference call, hang up.
To display and then select which conference participants to drop from the conference, press
Drop.
4610 and 5610 User Guide Page 15
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Using Speed Dials
Overview of Speed Dials
The phone can store up to 48 personal speed dials. Press SpDial, to display a screen similar to the
following:
The speed dials are sorted alphabetically.
To dial a speed dial number stored, press or adjacent to a name.
The symbol indicates that there are more pages. To move between pages, press or .
To add a new speed dial, press Add. See Adding a New Speed Dial.
To display an existing speed dial and edit current settings, press Edit. See Editing a Speed Dial.
Note
Speed dials can be used for any numbers that can be manually dialed from the extension. Where,
for external calls, a dialling prefix is required then that prefix must be part of the speed dial number.
Dialling a Speed Dial Number
You can use the speed dial directory to make a call with the handset on hook or off hook.
To dial a speed dial number:
1. To display the speed dial directory, press SpDial.
2. The symbol is shown if there is more than one page of speed dials. To move between
pages, press and .
3. When the speed dial required is shown on the screen, press or adjacent to the speed dial
name.
4610 and 5610 User Guide
4610 and 5610 User Guide Page 16
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Adding a Speed Dial from the Call Log
You can create a new speed dial from a call log entry. See Saving a Call Log Entry to Your Speed Dial
List. This process will start the normal speed entry screen but pre-filled with the name and number from
the call log entry.
Editing a Speed Dial
To edit a speed dial:
1. Press SpDial and then press Edit.
2. Select the speed dial entry you want to edit. To display different pages of speed dials, press
and .
3. When the required entry is displayed, press the adjacent or .
4. Edit the speed dial using the same methods as for adding a new speed dial. See Adding a New
Speed Dial.
5. To return to the speed dial list, press Save.
Deleting a Speed Dial
To delete a speed dial:
1. Press SpDial and then press Delete.
2. Select the speed dial entry you want to delete. To display different pages of speed dials, press
and .
3. Press Delete again or to exit without deleting, press Cancel.
4. Select another entry to delete or to return to the speed dial list, press Phone/Exit.
Using Speed Dials
4610 and 5610 User Guide Page 17
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Adding a New Speed Dial
To add a new speed dial:
1. Press SpDial and then press Add. If a message stating that the speed dial list is full
appears, you must first delete an existing entry before adding a new entry. See Deleting a Speed
Dial.
2. The cursor, a | symbol, is initially in the empty name field.
3. Begin entering text using the phone keypad. Each key is marked with the letters it provides. You
may have to press the key more than once depending on the character you require.
For example, the key 2 is also marked as A, B and C. To enter a C, press 2 until C is
displayed.
To enter the next character from the same key, e.g. a, press to move the cursor right
and then enter the character or simply press another key.
If you make a mistake, use to move the cursor to the right of the incorrect character
and then use Backspace to delete it or to delete the last character entered, press
Backspace.
4. As you enter Name characters you can use a number of other controls:
Case: Change the case of the current character between upper and lower case.
Moves the cursor right one character.
Moves the cursor left one character
Clear: Delete the whole name.
Backspace: Delete the character to the left of the cursor.
Symbol: provides access to the following symbols:
Period (.), Comma (,), Hyphen (-), Space (inserts a space between characters), Slash (/)
or Apostrophe (').
Save: Save the speed dial changes.
Cancel: Return back to the speed dial directory without making any changes.
5. When the Name has been entered, press Done.
4610 and 5610 User Guide
4610 and 5610 User Guide Page 18
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
6. The Number menu is displayed. Enter the required number, including any external line access
digit (for example; 9):
If you make a mistake, use to move the cursor to the right of the incorrect number and
then use Backspace to delete it or press Backspace to delete the last number
entered.
7. As you enter Number characters you can use other controls:
Moves the cursor right one character.
Moves the cursor left one character
Clear: Delete the whole name.
Backspace: Delete the character to the left of the cursor.
Symbol provides access to the following symbols:
Period (.), Comma (,), Hyphen (-), Space (inserts a space between characters), Slash (/)
or Apostrophe (').
Save: Save the speed dial changes.
Cancel: Return back to the speed dial directory without making any changes.
Note
The controls on this screen are context sensitive, i.e. they only appear when applicable. For
example; Save only appears when both a name and number have been entered.
8. When the Number has been entered, press Save.
4610 and 5610 User Guide Page 19
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Using the Call Log
Overview of the Call Log
The phone maintains a call log. To access, press Log.
The call logs keeps logs of missed calls, outgoing calls made and incoming calls answered. Each of
these logs includes the 30 most recent calls in its category. A screen similar to the following is displayed:
The name of the called or calling party if available.
The number of the called or calling party.
The time of the call.
The date of the call if prior to the current day.
The symbol indicates that the log contain more pages of entries. To move between pages,
press and .
Note
Only outgoing calls made using the dial pad or a SpDial entry are logged.
To display full details of a log entry, press or adjacent to a log entry.
Each individual log entry includes details similar to the following:
The number of the called or calling party.
The time of the call.
The date of the call.
The duration of the call for outgoing and answered calls (not shown above for missed calls).
Apart from using the call logs for information, you can turn a call log entry into a speed dial for future
calls. You can also delete individual log entries or the all entries in a particular log.
Caution
Call log entries are lost whenever the phone system or the individual phone are reset.
4610 and 5610 User Guide
4610 and 5610 User Guide Page 20
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Accessing the Call Logs
To access the call logs:
1. Press Log.
2. The call log always opens in the Missed calls log.
Missed:
The log of calls that rang your extension but were not answered. This includes calls that
were diverted to voicemail or another number after ringing your extension.
4. To select the log required type press either:
InAns:
The log of incoming calls that were answered. This includes both internal and external
calls.
or
Outgo:
The log of calls made. This includes both internal and external calls.
4. If the selected log contains more than one page of entries, the is shown. To move between
pages, press and .
Displaying an Individual Log Entry
To display an individual log entry:
1. Locate the log entry in which you are interested from Missed, InAns or Outgo.
2. Press or adjacent to the entry. The log entry details are shown.
3. To return to the call log, press Return.
Using the Call Log
4610 and 5610 User Guide Page 21
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Making a Call from an Individual Log entry
To make a call from an individual log entry:
1. Locate the log entry in which you are interested from Missed, InAns or Outgo.
2. Press or adjacent to the entry. The log entry details are shown.
3. To make the call, press Call.
If the number shown is external but does not include the external dialling prefix used by your
phone system, go off-hook, dial the prefix and then press Call.
Turning a Log Entry into a Speed Dial
To turn a log entry into a speed dial:
1. Locate the log entry in which you are interested from Missed, InAns or Outgo.
2. Press or adjacent to the entry.
3. Press Add to SD. The screens for editing and adding speed dials will appear, pre-filled with
the information from the log entry. Edit the details if required (see Adding a New Speed Dial).
4. Press Save or Cancel.
You will be returned to the speed dial selection menu.
Deleting an Individual Log Entry
To delete an individual log entry:
1. Press Log.
2. Locate the log entry in which you are interested from Missed, InAns or Outgo.
3. Press the key adjacent to it.
4. Press Delete twice.
or
To return to the call log without deleting the log entry, press Cancel.
4610 and 5610 User Guide
4610 and 5610 User Guide Page 22
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Deleting All Entries from a Log
To delete all entries from a log:
1. Press Log.
2. To select the log, press Missed, InAns or Outgo.
3. Press DeleteAll.
4. To delete the log entries, select Delete.
or
To return to the call log without deleting the log entries, press Cancel.
Exiting the Call Logs
Press EXIT.
4610 and 5610 User Guide Page 23
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Changing Options
Personal Ringing
The IP Office uses 'distinctive ringing' for different types of calls:
A repeated single ring for internal calls.
A repeated double ring for external calls.
A single ring followed by two short rings for ringback calls.
These options are fixed by the IP Office. You can personalize your phone's ringer sound so that you can
recognize it from other ringing phones.
To select a personal ring:
1. Press Options.
2. Press and then press Personal Ringing. A menu with the current ring pattern appears.
This alters the tone and style of ringing used by the phone, the ring pattern is still controlled by IP
Office according to the call type.
3. To select a ringing pattern, press Pattern 1 to 8. The selected ringing pattern is heard.
4. When you have selected a ringing pattern, press Save. You will hear a confirmation tone and
be returned to the options menu.
5. If you want to return to the options menu without changing the ring pattern, press Cancel.
4610 and 5610 User Guide
4610 and 5610 User Guide Page 24
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Viewing IP Settings
Views of phone and system information are available from the IP settings screen. You do not normally
need to view this information, however your system administrator may ask you to report certain values
from any of the status screens in the event of problems.
The status screen data can be viewed, but cannot be changed from your phone.
To view IP settings:
1. Press Options and then press View IP Settings.
2. There are two pages of display. Press and and select from:
IP Address Settings
IP (Internet Protocol) address information identifies certain components and connections.
The IP address information includes the location (address) of your phone on the IP Office
unit, the location and port (connection) of the IP Office itself, the call routing and mask
addresses, and the identification of the File Server with which your phone interacts.
Although technical in nature, having this information available and knowing how to get to it
can assist your system administrator in tracking questions about or problems with phone
functions or connections.
Quality of Service (QoS) Information
QoS refers to a number of mechanisms used to improve audio quality over the network.
Phone Interface
Your phone interfaces with several system hardware devices and software. This screen
provides information about three of the main interfaces.
Miscellaneous Information
The miscellaneous status screens provide additional information about your phone and its
connections.
3. To return to the first View IP Settings screen, press Return.
Changing Options
4610 and 5610 User Guide Page 25
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Display Contrast
You can adjust the contrast level on the phone display. You can choose from among fifteen levels of
contrast.
To adjust the contrast level:
1. Press Options.
2. Press and then press Contrast Control.
3. To adjust the level of contrast, press or .
4. When the contrast is set as required, either:
To save and return to the options menu, press Cancel.
or
To return to the options menu, press Cancel.
Logging Off
Allows you to log your phone off to prevent unauthorized use during an absence, or for privacy purposes.
Caution
Logging off deletes all Call Log entries and returns any options you may have changed to their
default values.
To log your phone off:
1. Press Options.
2. Press and then press Log off.
3. To un-register your phone from the IP Office, delete all Call Log entries and returns any options
you may have configured to their default values, press Yes.
4. To return to the Option menu, press No. Your phone remains logged on to the network and
your Call Log and options values remain unchanged.
To log back on:
The display will show Ext.=xxx in the top row. Press # and enter your password (consult your
system administrator).
4610 and 5610 User Guide
4610 and 5610 User Guide Page 26
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Changing Feature Key Labels
This feature can be used to edit and change the text label shown next to buttons.
To change the feature key labels:
1. Press Options.
2. Press and then press Feature Button Labeling.
3. Select from:
Relabel feature buttons: proceed from next step:
View Default labels
Restore default labels: restores any previously renamed feature labels to their default
state.
3. Select the function key whose label you wish to change. The display will change to show the
editing menu with New: highlighted.
4. Begin by entering the new text using the phone keypad. Each key is marked with the letters and
number it provides. You may have to press the key more than once depending on the character
you require. For example:
The key 3 is also marked as D, E and F. To enter a D, press 3.
If the next character you want to enter is on the same key, press to move the cursor
right and then enter the character. Alternatively, key the next character.
By default, the first letter is entered in upper-case and the phone then switches to lower-
case entry mode. To change the case of the current character, press Case.
To enter a space, press Space.
If you make a mistake, press Backspace to delete the character to the left of the
cursor.
If you have make a mistake in the middle of the text, press to backspace and then
press Backspace to delete the character to the left of the cursor.
To delete the complete entry, press Clear.
You can also enter an Apostrophe, Hyphen or Comma as required.
5. When the new name is set as required, press Save.
6. To return to the Label screen without saving the changes, press Cancel. To return the main
Options menu, press Return.
7. To return to the Call Handling screen without saving the changes, press Phone/Exit.
Changing Options
4610 and 5610 User Guide Page 27
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Displaying Language Selection
When the phone is first installed, it is set to display screen text in English. You can select the language
that you would prefer from the following:
English, German (Deutsch), French (Français), Spanish (Español), Italian (Italiano), Dutch (Nederlands),
Portuguese (Português) or Japanese (Katakana characters).
Note
This does not alter your user language setting on the phone system.
To change the language:
1. Press Options.
2. Press and then press Select display language. A menu listing the available languages
appears.
3. To search for the language required, press or . You are asked in the original language Are
you sure? with the same message in the new language below.
4. Do one of the following:
To return to the options menu without saving any changes, press Return.
or
To save the settings and return to the options menu, press Yes (which is displayed in
both the original and the selected language).
Phone Screen on Answer
This action controls the phone screen display when the phone is answered.
When the Phone Screen on Answer? option is set to Yes, the phone screen appears in the display
area when you answer a call, regardless of the screen you were working with at that time. You will lose
any unsaved work in progress on that screen (for example, labeling a Speed Dial button), except for the
Web Access application (which remembers the current web screen).
When the Phone Screen on Answer? option is set to No (the default setting), answering an incoming
call has no impact on the application screen displayed, although the top display line will provide an
appropriate message.
To change Phone Screen on Answer:
1. Press Options and then press Application Options.
2. Press Phone Screen on Answer. It will toggle between Yes and No.
3. Press Save. To restore the previous setting without changing it, press Cancel. After
saving or canceling, the first Options main screen is displayed.
4610 and 5610 User Guide
4610 and 5610 User Guide Page 28
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Phone Screen on Calling
This action controls the phone screen display when the phone is answered.
When the Phone Screen on Answer? option is set to Yes (the default setting), the phone screen
appears in the display area when you answer a call, regardless of the screen you were working with at
that time. You will lose any unsaved work in progress on that screen (for example, labeling a Speed Dial
button).
When the Phone Screen on Answer? option is set to No answering an incoming call has no impact on
the application screen displayed, although the top display line will provide an appropriate message.
To change Phone Screen on Calling:
1. Press Options and then press Application Options.
2. Press Phone Screen on Calling. It will toggle between Yes and No.
3. Press Save. To restore the previous setting without changing it, press Cancel. After
saving or canceling, the first Options main screen is displayed.
Display Call Timers
This action controls whether the duration of the current call is displayed or not. If set to Yes, the duration
of the current call is displayed on the call appearance key. If set to No, the call duration will not be
displayed.
To change the Display Call Timers status:
1. Press Options and then press Application Options.
2. Press and then press Display Call Timers?. It will toggle between Yes and No.
3. Press Save. To restore the previous setting without changing it, press Cancel.
Message Display Rate
When the IP Office sends messages to your phone that are longer than the display area, the first part of
the message is presented for a specific time interval. The second part of the message is then displayed
for a specific time interval. The Message Display Rate can be either Fast (display interval is 2 seconds)
or Slow - default (display interval is 3 seconds).
To change Message Display Rate:
1. Press Options and then press Application Options.
2. Press and then press Message Display Rate. It will toggle between Fast and Slow.
3. Press Save. To restore the previous setting without changing it, press Cancel.
Changing Options
4610 and 5610 User Guide Page 29
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Visual Alerting
When this option is set to No (the default), ringing is the only notification of an incoming call. When set to
Yes, your phone rings and your voice message indicator light flashes to alert you to an incoming call.
To change Visual Alerting:
1. Press Options and then press Application Options.
2. Press and then press Visual Alerting? and toggle between Yes and No.
3. Press Save. To restore the previous setting without changing it, press Cancel.
4610 and 5610 User Guide Page 30
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Function Keys
Overview of the Function Keys
Both the Function Keys and Soft Keys can be used to access a range of system features. The display
adjacent to the key shows the feature name.
Some of these features are default features supported by the phone (e.g. SpDial, Option and Log on
the Soft Keys) and are always available. Others are system features that can only be programmed by
the system administrator for Function Keys.
In addition, there are a number of System Features that you can always access yourself by the use of
short codes. Refer to System Features Introduction for details of System Features that you can always
access yourself by dialling short codes, e.g. to listen to your voicemail messages, dial *17.
The main screen has 4 pages. This means that the 6 and Function Keys on each page could be
used for up to 24 features. However, it is strongly recommended that all three Call Appearance keys
remain at their default settings. Hence, there are 15 soft Function Keys that can be allocated to
system features.
To move between pages, press and .
In the following example:
The first three keys have been set (default setting) as call appearance lines.
Key 4 has been set to access the Admin programmable functions.
Key 5 has been set to monitor system park slot 1. The indicates a call is currently parked in slot
1 by the user and when parked in a slot by other users, the label is underlined.
Key 6 has been set to the SAC (Send All Calls) function.
To display the other page of programmed functions set for this phone, press either or .
Programming your own functions:
If the phone has been setup with either or both the Admin and Admin1 features assigned to display
keys, you can select and program your own feature choices against other keys.
Function Keys
4610 and 5610 User Guide Page 31
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Function Key Programming
If any one of the keys on the telephone is programmed with an Admin or Admin 1 feature key, it allows
you to program further features against other function keys. Both Admin and Admin1 are allocated to
your function keys by your system administrator and would appear on a menu screen that is similar to
the following:
The two tables below list the user programmable features available from Admin and Admin1.
For full details of how each function works see Function Key Features.
Admin: The programmable functions available via an Admin key are:
Name Description Toggles Data
Acct Account Code Entry No Optional
AD Abbreviated Dial No Yes
Admin Self-Administer No No
AutCB Automatic Callback Yes No
CFrwd Call Forwarding All Yes Optional
CPark Call Park Yes Optional
CPkUp Call Pickup No No
Dir Directory No No
DPkUp Directed Call Pickup No Yes
Drop Drop No No
GrpPg Group Paging No Yes
HdSet Headset Toggle Yes No
HfAns Internal Auto-Answer Yes No
HGNS+ Set Hunt Group Night Service Yes Yes
Park Call Park to Other Extension No Yes
Prog Abbreviate Dial Program No Yes
RngOf Ringer Off Yes No
SAC Send All Calls Yes No
Spres AD Suppress Yes No
Timer Timer Yes No
TmDay Time of Day Yes No
4610 and 5610 User Guide
4610 and 5610 User Guide Page 32
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
In addition to the above, there is a key labeled Exlp? This key enables you to change the display from
the shorthand version displayed at default to a longhand version of your own. See Shorthand
Programming Mode and Longhand Programming Mode respectively.
Admin1: The programmable functions available via an Admin1 key.
Name Description Toggles Data
Park Park No Yes
<User> User No Yes
<Group> Group No Yes
<Number>
Dial No Yes
Flash Hook Flash No No
Function Keys
4610 and 5610 User Guide Page 33
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Shorthand Programming Mode
1. Press Admin or Admin 1. See Function Key Programming.
2. The Admin or Admin1 menu is displayed, similar to the following:
Admin Pages
With the exception of Expl?, the names shown are the features that you can assign to soft keys.
When Admin has been selected you can display the full name of the feature by pressing Expl?.
See Longhand Programming Mode.
Admin1 Page
3. On the Admin pages, press and to move through the list of feature.
4. When the function required is shown, press adjacent to its name.
5. If the function requires some data to be entered, [ ] is shown at the bottom of the display. Enter
the data using the normal phone keypad.
6. The upper part of the display reverts to showing the functions currently assigned to each and
.
7. To select the display key against which to program the new function, press and .
Caution
Do not select the slot used for the Admin function. Replacing this function will lock the
phone for further programming until reset through the phone system.
8. If the display slot is not already used, the display shows BUTTON PROGRAMMED!.
To end programming, press Phone/Exit.
To continue programming other functions, press Cont.
9. If the display slot already has a programmed function, the display shows FEATURE ON
BUTTON. Press or until Repla, Keep and Delet are shown along the right-hand edge of the
display.
To replace that existing function with the one just programmed, press Repla . The
display shows BUTTON PROGRAMMED! as above.
To keep the existing function and forget the function just programmed, press Keep .
To delete the existing function and forget the function just programmed, press Delete .
4610 and 5610 User Guide
4610 and 5610 User Guide Page 34
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Longhand Programming
1. Press Admin or Admin 1.
2. To switch to longhand programming mode, press Expl? .
3. Press Next until the function required is shown, then press Selct .
4. If the function requires some data to be entered, [ ] is shown at the bottom of the display. Enter
the data using the normal phone keypad.
5. The upper part of the display reverts to showing the functions currently assigned to each and
.
6. To move between the pages of display keys, press and .
7. To select the display key against which to program the new function, press or .
Caution
Do not select the slot used for the Admin function. Replacing this function will lock the
phone for further programming until reset through the phone system.
8. If the display slot is not already used, the display shows BUTTON PROGRAMMED!.
To end programming, press Phone/Exit.
To continue programming other functions, press Cont
9. If the display slot already has a programmed function, the display shows FEATURE ON
BUTTON. Press or until Repla, Keep and Delet are shown along the right-hand edge of the
display.
To replace that existing function with the one just programmed, press Repla .
BUTTON PROGRAMMED! is displayed.
To keep the existing function and forget the function just programmed, press Keep .
To delete the existing function and forget the function just programmed, press Delete .
4610 and 5610 User Guide Page 35
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
System Features
Introduction
As well as your phones specific features, you can access a number of system features by dialling short
codes.
These instructions are for the system's default configuration. They assume that you are using the default
feature codes. It also assumes that you have full access to all features and the public phone network.
Making Calls
To make internal calls:
If your system administrator has allocated you the Ring Back When Free feature (see RBak+ - Ringback
When Free) under a dial pad digit, you can:
1. When you call an extension that does not answer or is busy, press RBak to set a callback on
that extension.
2. When the extension you called becomes free, your phone will ring (a burst of three rings). Lift the
handset and the extension is called automatically.
3. Lift the handset and the extension is called automatically.
To make external calls:
Either:
Dial the number (prefixed by the access code if required).
or
Use a speed dial code (contact your system administrator for a list of your speed codes).
If you hear busy tone while dialling, then the call may be barred. Your system administrator can bar
certain calls, such as those to premium rate numbers and international calls.
4610 and 5610 User Guide
4610 and 5610 User Guide Page 36
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Answering Calls
To answer calls at your own extension:
Pick up the handset.
or (in headset mode)
Press the button associated with the alerting call.
The default ring cadences are:
Internal calls - single ring cadence.
External calls - double ring cadence.
To answer a call at another extension:
You can answer from your own phone by using Call Pick-Up; lift your handset and dial:
*30 to answer a call ringing anywhere.
*31 to answer a call within your group.
*32*201# to answer the call for a particular extension, in this example 201.
Note
If your phone rings for any longer than a specified period (15 seconds in default), any re-direction
feature that you have activated, such as voicemail or call forwarding, will come into effect.
Call Waiting
Call Waiting tells you if another call arrives while you are already making a call by providing a call waiting
tone. If you hear the call waiting tone, either end your current call or put the caller on hold. The waiting
call should then ring.
To turn call waiting on, dial *15. To turn it off, dial *16.
Note
Call Waiting is only used for a single line phone with no call appearance buttons programmed.
System Features
4610 and 5610 User Guide Page 37
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Call Forwarding
Your calls can be forwarded to another extension or an external number when:
You are away from your desk (on no answer).
or
Your extension is busy (on all Call Appearance keys).
or
You are away from the office (e.g. when you are on holiday).
The following options are available for call forwarding:
To set the number to which your calls are forwarded, dial *07*201# (forwarding to 201 in this
example).
To switch Forward Unconditional On (i.e. not Hunt Group), dial *01. A D is displayed. To switch it
off, dial *02.
To switch Forward On Busy On, dial *03. To switch it off, dial *04.
To switch Forward On No Answer On, dial *05. To switch it off, dial *06.
To switch Forward Hunt Group Calls On, dial *50. To switch it off, dial *51. This setting is for
Forward Unconditional On only.
Diverting Calls
You can divert your calls to another extension. In the examples below, N is the extension to which you
want your calls diverted.
Note
If you do not answer calls at the temporary extension, they are forwarded to your own voicemail or
call forwarding number.
To divert calls at another extension:
Dial *12*N# from the extension you are temporarily using.
Dial *13*N# to re-direct the calls back to your own extension, before you return to it.
To divert calls at your own extension:
Dial *14*N# from your own extension.
Dial *14*# to cancel either feature from your own extension.
4610 and 5610 User Guide
4610 and 5610 User Guide Page 38
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Do Not Disturb
You may choose to receive no calls at all or only those from particular callers on your exceptions list:
To switch Do Not Disturb on/off (with or without exceptions), dial *08. An N is displayed. To
switch it off, dial *09.
To add a number to the exception list, dial *10*N#.
To delete a number from the exception list, dial *11*N#.
Note
Your callers, other than your exceptions, either hear busy tone or are re-directed to your voicemail.
Voicemail
You can enable voicemail to allow callers to leave messages when you are out of the office, away from
your desk or engaged on another phone call. Voicemail messages can be retrieved internally or
externally via any phone. Your voicemail may be set up to deliver your messages by calling you
whenever you hang up: this feature is known as Voicemail Ringback.
Note
Not all systems support voicemail or have voicemail installed.
The following options are available for voicemail:
To switch voicemail on, dial *18. To switch it off, dial *19.
To retrieve your voicemail, dial *17.
To turn Voicemail Ringback on, dial *48. To turn it off, dial *49.
Dialling a number while listening to your messages invokes further facilities:
Once messages have been delivered, they are held on the system for 24 hours (this is fixed for
Voicemail Lite, but can be varied by your system administrator if your IP Office is equipped with
VoicemailPro).
You can collect your voicemail from another extension by using the PIN your system
administrator has set up for you. You can collect your messages if you are out of the office, by
either dialling from a number that has been registered for the purpose or by dialling your
extension number and PIN when prompted. If validation is successful, then dial 2 to retrieve your
mail.
The system administrator also specifies the reception number, to which the call is diverted if the
caller dials 0, and your email address if your voicemail and email are integrated.
System Features
4610 and 5610 User Guide Page 39
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Default Feature Codes
The following are the normal default feature codes available to all users. Your system administrator may
add additional codes for other features and for speed dials.
The N (where shown), should be replaced by the appropriate number. For example, with *07*N#, replace
N with the extension to which you want your calls forwarded when you have forwarding switched on.
*00 Cancel All Forwarding *32*N# Call Pick Up Extension
*01 Forward Unconditional On *33*N# Call Queue
*02 Forward Unconditional Off *34 Hold Music
*03 Forward On Busy On *35*N# Extn Login
*04 Forward On Busy Off *36 Extn Logout
*05 Forward On No Answer On *37*N# Park Call
*06 Forward On No Answer Off *38*N# Ride Call
*07*N# Forward to Number *39 Relay On
*08 Do Not Disturb On *40 Relay Off
*09 Do Not Disturb Off *41 Relay Pulse
*10*N# Do Not Disturb Exception Add *42 Relay On
*11*N# Do Not Disturb Exception Delete *43 Relay Off
*12*N# Follow Me Here *44 Relay Pulse
*13*N# Follow Me Here Cancel *45*N# Call Steal
*14*N# Follow Me To *46 Call Steal
*15 Call Waiting On *47 Conference Add
*16 Call Waiting Off *48 Voicemail Ringback On
*17 Voicemail Collect *49 Voicemail Ringback Off
*18 Voicemail On *50 Forward Hunt Group Calls On
*19 Voicemail Off *51 Forward Hunt Group Calls Off
*20*N# Set Hunt Group Night Service *52 Clear Call
*21*N# Clear Hunt Group Night Service *53*N# Call Pickup Members
*29 Toggle Calls *57*N# Forward On Busy Number
*30 Call Pick Up Any *70*N# Dial Physical Extn by Number
*31 Call Pick Up Group *71*N# Dial Physical Extn by ID
4610 and 5610 User Guide Page 41
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Management and Troubleshooting
Overview
This section provides helpful information for:
Testing your phone to be sure it is operating correctly.
Basic Troubleshooting; this chart provides the most common problems an end user might
encounter and suggested resolutions.
Application-specific troubleshooting; this chart describes problems and solutions specific to
phone application (Speed Dial, Call Log, or Web Access).
Resetting or power-cycling your phone, when Basic Troubleshooting does not resolve a problem.
Testing Your Phone
The test function enables you to verify that your phones lights and display are operating properly.
To test the phone's lights and display:
1. With the phone idle (on-hook), press and release Mute, then press the following numbers on
the dial pad: 8 3 7 8 # (which stands for TEST).
The display should indicate the self-test has started. If the test is successful, the message Self
test Passed #=end displays; if the test is not successful, the message Self test Failed #=end
displays instead.
2. To return to the phone screen, press #.
If nothing appears on the display and the phone is receiving power, your phone may need to be
replaced. Contact your system administrator for assistance or additional troubleshooting
information.
4610 and 5610 User Guide
4610 and 5610 User Guide Page 42
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Troubleshooting Chart
Phone does not activate when connected for the first time:
Unless your system administrator has already initialized your phone, you may experience a delay
of several minutes before it becomes operational. Upon plug-in, your phone immediately begins
downloading its operational software, IP address, and any special features programmed by your
system administrator from the server to which it is connected. Report any delay of more than 10
minutes to your system administrator.
Phone does not activate after a power interruption:
Allow a few minutes for re-initialization after unplugging, powering down the phone, server
problems, or other power interruption causes.
Display shows an error/informational message:
Most messages involve server/phone interaction. If you cannot resolve the problem based on the
message received, contact your system administrator for resolution.
Speakerphone does not operate:
Ask your system administrator if your Speakerphone has been disabled.
Characters do not appear on the display screen:
See " Phone does not activate when connected for the first time" above. Check all lines into the
phone to be sure it is properly connected. Check the power source to be sure your telephone is
receiving power. Perform the following Test procedure: with the telephone idle (on-hook), press
and release Mute, then press the following numbers on the dial pad: 8 3 7 8 # (which stands
for TEST). The display should indicate the self-test has started, then report if the test was
successful or failed. If nothing appears on the display, and the phone is receiving power, your
phone may need to be replaced. If the above suggested solutions do not resolve the problem,
reset or power cycle the phone with your system administrators assistance.
No dial tone:
Make sure both the handset and line cords into the phone are securely connected. Note that
there may be a slight operational delay if you unplug and reconnect the phone. Contact your
system administrator if the problem persists.
Phone does not ring:
Set your ringer volume to a higher level using and . From another phone, place a call to
your extension to test the above suggested solution.
All other IP problems:
Contact your system administrator.
SPEED DIAL APPLICATION:
You cannot dial out using any Speed Dial entries:
Dial button. Check that all call appearances (incoming/outgoing lines) are not already in use. If all
lines are in use, wait until a line is available to make your call.
You cannot add an entry to the Speed Dial list:
You have 100 Speed Dial entries, the maximum allowed. You must delete at least one entry
before adding a new entry.
CALL LOG APPLICATION:
You cannot dial out after selecting a call log entry:
Check that all call appearances incoming/outgoing lines are not already in use. If all lines are in
use, wait until a line is available to make your call.
You cannot add an entry to the Speed Dial list:
You have 100 Speed Dial entries, the maximum allowed. You must delete at least one entry
before adding a new entry.
Dialling from this application does not go through:
Your administrator must administer settings for the Enhanced dialling feature beyond the
defaults.
Index
4610 and 5610 User Guide Page 43
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Index
A
about this guide..........................................................1
admin/admin1 ..............................................31, 33, 34
answering calls ....................................................7, 36
B
bridged appearance...................................................3
buttons .......................................................................1
C
call appearance keys.............................................3, 4
call coverage appearance..........................................3
call log
accessing............................................................20
deleting ...............................................................22
displaying............................................................20
exit ......................................................................22
overview..............................................................19
speed dial ...........................................................16
troubleshooting ...................................................42
calls
answering .......................................................7, 36
clearing .................................................................8
conference..............................................13, 14, 39
diverting ..............................................................37
forwarding.....................................................37, 39
hold .....................................................................12
making ......................................................9, 21, 35
mute....................................................................11
redial ...................................................................11
transfer................................................................13
voicemail.......................................................38, 39
waiting...........................................................36, 39
changing feature key labels.....................................26
conference .........................................................13, 14
D
default feature codes ...............................................39
deleting
call log...........................................................21, 22
speed dial ...........................................................16
display........................................................................5
display call timers ....................................................28
display contrast........................................................25
diverting calls ...........................................................37
do not disturb .....................................................38, 39
E
external calls............................................................35
F
feature key labels.....................................................26
follow me..................................................................39
forwarding calls..................................................37, 39
function keys......................................................30, 31
H
headset ......................................................................9
hold ..........................................................................12
hunt group................................................................39
I
incoming calls ....................................................4, 7, 9
internal calls.............................................................35
IP settings ................................................................24
L
language ..................................................................27
lights/display ............................................................41
line appearance .........................................................3
logging off ................................................................25
longhand programming............................................34
M
making calls .....................................................8, 9, 35
management............................................................41
message display rate...............................................28
mute .........................................................................11
P
park call....................................................................39
personal ringing .......................................................23
phone screen on answer .........................................27
phone screen on calling...........................................28
pick up......................................................................39
programming
function key.........................................................31
longhand .............................................................34
shorthand............................................................33
Q
Quality of Service (QoS) ..........................................24
R
redial ........................................................................11
relay .........................................................................39
ring cadences...........................................................36
S
shorthand programming...........................................33
speakerphone ....................................................10, 42
speed dial
adding ...........................................................16, 17
deleting ...............................................................16
dialing..................................................................15
editing .................................................................16
log entry..............................................................21
overview..............................................................15
troubleshooting ...................................................42
using ...................................................................10
system features....................................................6, 35
T
testing ......................................................................41
toggle .......................................................................39
transfer.....................................................................13
troubleshooting ........................................................42
V
visual alerting...........................................................29
voicemail............................................................38, 39
4610 and 5610 User Guide
4610 and 5610 User Guide Page 44
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Performance figures and data quoted in this document are typical, and must be specifically confirmed in
writing by Avaya before they become applicable to any particular order or contract. The company
reserves the right to make alterations or amendments to the detailed specifications at its discretion. The
publication of information in this document does not imply freedom from patent or other protective rights
of Avaya or others.
Intellectual property related to this product (including trademarks) and registered to Lucent Technologies
have been transferred or licensed to Avaya.
All trademarks identified by the ® or are registered trademarks or trademarks, respectively, of Avaya
Inc. All other trademarks are the property of their respective owners.
This document contains proprietary information of Avaya and is not to be disclosed or used except in
accordance with applicable agreements.
Any comments or suggestions regarding this document should be sent to "wgctechpubs@avaya.com".
© 2006 Avaya Inc. All rights reserved.
Avaya
Unit 1, Sterling Court
15 - 21 Mundells
Welwyn Garden City
Hertfordshire
AL7 1LZ
England
Tel: +44 (0) 1707 392200
Fax: +44 (0) 1707 376933
Web: http://www.avaya.com/ipoffice/knowledgebase
37

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Avaya-4610sw

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Avaya 4610sw bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Avaya 4610sw in de taal/talen: Engels als bijlage per email.

De handleiding is 0,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Avaya 4610sw

Avaya 4610sw Gebruiksaanwijzing - Nederlands - 94 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info