Confirm selection by pressing the knob.
1.2. ROTARY KNOB
The rotary knob is the main button for navigation through the interface.
• When control panel is active pressing the knob enters the main menu. After that pressing
the knob confirms selected item or setting.
• Turning right selects next item or increases value of selected setting.
• Turning left selects previous item or decreases value of selected setting.
• While control panel is in sleep mode, turning the knob to either side allows to change the
set temperature/power level of the active mode. Changes are applied without
confirmation.
1.3. BACK BUTTON
Back button is used to return to the previous screen by pressing it once.
1.4. QUICK BUTTON
Quick button can be used to start or stop the heater without entering the main menu or quickly
enabling or disabling timers.
• While heater is off, pressing the button once opens the “Heating” menu.
• While the heater is off, long-pressing the button for 2 seconds starts the heater with
previous settings (Display message: “Starting…”).
• While the heater is operating, long-pressing the button for 2 seconds switches off the
heater (Display message: “Switching off…”).
• While the heater is operating (and in sleep mode), pressing the button once opens the
settings of the active operation mode. Changes are applied after confirmation.
• In the menu “Timers” pressing the button once enables/disables the selected timer (for
this action timer has to be set beforehand).
1.5. LED INDICATORS
LED indicators are used to indicate the operating mode or status of the heater:
• RED – heater is working in heating mode;
• BLUE – heater is working in ventilation mode;
• GREEN – heater is switching off (purge mode);
• RED (blinking combined with display message) – an error has occurred;
• LIGHT GREEN (one blink every 5 seconds) – a timer has been enabled.
