Turns/straight
Inform about slight turns - limits the "slightly left/right"
messages displayed on the route to the minimum.
Inform about turns - Disables the option of informing about
turns.
Show "Straight" when - defines the distance to a manoeuvre,
above which program shows "straight".
Signal "Straight" manoeuvres - limits the "straight"
messages displayed on the route to the minimum.
Speed
If you want to receive warnings about exceeding the safe speed
limit, you can specify its value and enable a relevant warning.
The safe speed is the limits and multiplication of 10 km/h. The
limits are speeds for the given road grade, determined in the
map. (If there is no limit in the map, the speed profile specified
at the Settings | Route | Car details screen is taken into
account).
3.3.5 Buttons - settings
The program enables assigning of many of its functions to hardware buttons of the user's device.
To assign/change function assignation, select menu "Settings"
from the main menu, then select "Buttons". Tap on one of the
options listed to open a hardkey selection window. Select a
button from the list to assign it to a chosen function. The
application will try to detect the device's buttons, but sometimes
it is unable to recognize the function buttons. If you want to
assign a function to a button that is not listed, exit the list. The
selected function will be highlighted in blue. Then press a
hardkey to assign it to the chosen function. Follow the
instructions above to assign functions e.g. to palmphone context
buttons.
The same applies to system operation on a PC: select a
keyboard button/button combination to assign it to a selected
function.
Abbreviation NQ before function name means "No question",
e.g. "(NQ) Start/stop track storage" means that you can start
track recording without being asked to enter a file name, while
"(NQ) Add the current position to POI" will create a POI with the category of the most recently created point (default:
"Other") and a name taken from the POI's description on the map.
Error reporting
"Report error" is an important feature that is available only by assigning it to buttons. This function helps you to send
map errors to the AutoMapa support centre. By default, the function is assigned to the Enter/OK device button. It
generates the following files in the map installation folder (default: "Memory card/AutoMapa EU/Maps/map
name/Errors/YYYY-MM-DD")
• print screen (bitmap in .bmp format)
• GPS track (.gps and .gps.bin files)
• current route (.atm file)
