815460
17
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
2 english
2.2 Fuel
Approved fuel
Dry, well-seasoned, natural firewood (preferably hardwood), wood
briquettes.
Round wood should be split at least once to make it burn better. The
diameter of the split log should not exceed 7 cm.
Maximum fuel quantity
Each fireplace insert is designed for a maximum quantity of wood (see
9.2 Technical Data). Larger quantities of fuel can lead to overheating
and damage to the stove!
Clean combustion
To ensure clean, low-emission combustion, dry (relative wood moisture
< 20%) and untreated firewood must be used. (Not only does wet wood
have a lower calorific value, it will also cause the panes of your fireplace
insert to become tarnished with soot much more quickly). Secondly, the
correct amount of firewood must be burned. Heat responsibly using dry firewood and so protect
people and the environment.
Burn only the approved fuel listed above. Waste materials must not be burned in the fireplace insert!
Burning non-approved fuels will invalidate the warranty and guarantee.
Burning or introducing easily combustible or explosive substances (such as empty aerosols and the like)
into the firebox and storing these in the immediate vicinity of your heating unit is strictly prohibited due to the
risk of explosion!
2.3 Before heating
The fireplace heater can only function properly if sufficient combustion air flows into the installation
room (the appliance), especially when several heat systems are operated simultaneously. Ensure
sufficient air supply prior to heating. Open the combustion air flap on the appliance and keep it open for
the entire combustion period. Devices for the supply of combustion air must not be modified.
2.4 Initial operation
Remove all enclosed documents and accessories from the fireplace and read the operating
instructions carefully before using for the first time
The initial operation of your fireplace system should take place no earlier than 4 weeks after
completion of the cladding, so that all cladding parts can dry out thoroughly.
For an optimum fire, please refer to paragraph 2.5 Lighting the fire.
When heating for the first time after installing, the fire should be kept very low for the first hour, and
only gradually increased by adding a larger amount of wood. However, the maximum quantity of wood,
which can be fed per hour, must not be exceeded.
The odours occurring when the fire is lit for the first time are caused by the evaporation of metal grease
and paint binding agents. These vapours are unpleasant but completely non-toxic. We therefore
recommend that you ventilate the room well when you light the fire for the first time.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Austroflamm Miu bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Austroflamm Miu in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 1.16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info