517792
8
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
8 GB/IE
©
Installing the LCD
radio-controlled clock
Note: You will need a drill, suitable assembly
material and a screwdriver for installation.
CAUTION! DANGER TO LIFE AND RISK
OF INJURY; RISK OF DAMAGE TO PROP-
ERTY! Please read the operating and safety instruc-
tions for your drill carefully.
WARNING!
DANGER TO LIFE! Please
ensure that you do not drill into any electrical wiring,
gas or water pipes in the wall. If necessary, carry out
checks with a wire, pipe and stud detector before
you drill into a wall.
Find a suitable place to install the radio-controlled
clock.
˽ Mark the drill hole on the wall.
CAUTION! DANGER OF INJURY! Refer to
the operating instructions for your electric drill.
˽ Drill the hole with a drill.
˽
Insert a suitable dowel into the drill hole.
˽ Use a screwdriver to insert a suitable screw.
Hang the radio-controlled clock on the screw
using the mount
17
.
Inserting or replacing batteries
The battery symbol
3
appears in the LC dis-
play if the batteries are too weak. Make sure you
replace the batteries at the earliest opportunity.
The radio-controlled LCD wall clock starts to receive
the radio time signal as soon as the batteries are
inserted.
Note: Do not alter the position of the radio-controlled
clock during reception of the signal. This may disrupt
reception.
Radio time signal (DCF):
The DCF signal (time signal transmission) consists
of time pulses broadcast from one of the most accu-
rate clocks in the world. It is situated near Frankfurt /
Main, Germany.
Your radio-controlled clock receives these signals
under ideal conditions up to a distance of approx.
1,500 km around Frankfurt / Main. Reception of the
radio signal generally takes approx. 3–10 minutes.
If it does not work properly, restart the radio-
controlled clock. To do this, keep the WAVE
button
21
pressed for approx. 3 seconds.
Reception can be considerably impaired by obstacles
(e.g. concrete walls) or sources of interference (e.g.
other electrical devices). If necessary, change the
location of the radio clock (e.g. by putting it near a
window) if you have problems with reception.
©
Operation
©
Reception of DCF radio signal
The radio-controlled clock automatically starts to
search for the DCF radio signal. The radio icon
2
on the LCD indicates that the clock is searching for the
radio signal.
Note: Reception of the radio signal may be seriously
disrupted in reinforced concrete buildings (see “Set-
ting up Devices”).
It is also possible to start reception of the DCF radio
signal manually on the clock.
Press and keep pressed the WAVE button
21
for longer than 3 seconds. The LCD radio-con-
trolled wall clock attempts to receive the DCF
radio time signal. This process takes several
minutes and is indicated in the LC display by a
flashing radio symbol
2
.
Note: If the radio-controlled clock cannot pick up
the DCF radio signal on account of an error or the
distance from the transmitter, etc., it is also possible
to set the time manually. As soon as reception of
the DCF signal is successful, the manual settings
are overwritten.
Before Initial Use / Operation
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Auriol Z30237C bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Auriol Z30237C in de taal/talen: Duits, Engels, Deens, Zweeds, Fins als bijlage per email.

De handleiding is 1,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Auriol Z30237C

Auriol Z30237C Gebruiksaanwijzing - Nederlands, Deutsch, Français - 23 pagina's

Auriol Z30237C Gebruiksaanwijzing - Italiano - 45 pagina's

Auriol Z30237C Gebruiksaanwijzing - Italiano - 23 pagina's

Auriol Z30237C Gebruiksaanwijzing - Português, Espanõl - 45 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info