659606
5
Verklein
Vergroot
Pagina terug
1/17
Pagina verder
-
7
-
Setup
Open the battery compartment on the backside of the device and
insert one 1.5 V AA R6/LR6 battery in the correct polarity. Close
the battery compartment.
The hands of the alarm clock will now move to the 11:00:00,
3:00:00 or 7:00:00 o'clock position and stop. The alarm clock
will now begin to receive the DCF 77 radio time signal. This
process will take around 3 to 10 minutes.
Note: Please do not move the alarm clock during the reception
process.
If the radio time reception attempt is successful, the hands will
automatically move to the correct position and the correct date
will be set. If the reception attempt fails, the clock will restart the
reception attempt hourly and the hands will stay in the reception
position. After 8 failed reception attempts the alarm clock will stop
attempting to receive the signal and the time must be set manually.
Reception problems
The DCF77 radio control signal is transmitted from a location near
Frankfurt am Main and can be received at a distance of up to
1500 km. However, there are some obstacles and sources of
interference, which may substantially hinder reception. If your
alarm clock does not correctly receive the DCF77 radio signal,
please hang or place the alarm clock in a different location at
your site. Please note that devices such as computers, telephones,
-
8
-
radios and televisions may cause electromagnetic radiation which
can interfere with the DCF77 radio signal reception. Other
possible detriments to reception are: strong building insulation
(metal building materials), nearby mountains or atmospheric
interference. It may also be necessary to replace the batteries.
Restart
Press the REC button on the backside of the alarm clock for 4
seconds to restart radio time signal reception. The hands of the
alarm clock will now move to the 11:00:00, 3:00:00 or 7:00:00
o'clock position and stop. The alarm clock will now begin to
receive the DCF 77 radio time signal.
If radio time signal reception is not possible, the time must be set
manually.
Manual time setting
If radio time signal reception is not possible, the time can be set
manually:
Press and hold SET for 4 seconds.
Press SET briefly to move the hands forward by 1 minute.
Press and hold SET to use speed setting.
If the SET button is not pressed for 8 or more seconds, the alarm
clock will exit setting mode and the set time will be activated.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Auriol-4-LD4537---IAN-282632

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Auriol 4-LD4537 - IAN 282632 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Auriol 4-LD4537 - IAN 282632 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Auriol 4-LD4537 - IAN 282632

Auriol 4-LD4537 - IAN 282632 Gebruiksaanwijzing - Nederlands, Français, Dansk - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info