PPS (Phantom Power Supply)
Power supply socket for audison
external audio accessories.
2
1
SPEAKER A/B (LO-BYPASS)
Amplifier power outputs. Signal is MONO.Thetwo
outputs are in parallel in order to allow the connection of
one, two or more speakers. Connect the speakers cables
to these outputs according to polarity. Terminal blocks
accept cables up to 9 A.W.G. max (see “audison cable
products for electric connections” as far as their size is
concerned). We recommend the use of audison cable
products.
L
R
1
1
2
4
3
IN
Amplifier left (L) and right (R) channels inputs. The preamplified outputs (PRE OUT) of a source
(head unit, CD player, DAT, etc.) or of an external electronic crossover must be connected to them.
If you bypass the LO-PASS filter (F1: ), only the right channel (R) signal will be amplified; if you
apply preamplified signals to inputs, you’ll always have them on the corresponding outputs
(OUT).
3
OUT/HI-BYPASS
Amplifier left (L) and right (R) channels preamplified outputs. Available signal is Hi-PASS or full
range (see “Configurations table”).
4
