4. SYSTEM SETUP
Please follow the below steps to enter the System Page:
First, power on the unit with the disc tray is empty or the disc
door is opened, then press SETUP button and enter the
System Page by pressing NAVIGATION buttons.
- it is used to select the TV mode.
Please select this option as per your TV set.
- select preferred audio language.
(DVD only - need disc software support)
- select preferred subtitle language.
(DVD only - need disc software support)
- select preferred disc menu language.
(DVD only - need disc software support)
- select rating levels.
(DVD only - need disc software support)
Option: Change
Select to change password
Procedure to change password:
1) Enter old password in the Old Password row
2) Enter new password in the New Password row
3) Enter the new password again in the Confirm Pwd row
You may reset the password if you forget the old password
by using the supervisor password: 1389
- Reset to factory settings.
- It is used to exit the setup menu.
4.1 TV TYPE
4.2 AUDIO
4.3 SUBTITLE
4.4 DISC MENU
4.5 PARENTAL
4.6 PASSWORD
4.7 DEFAULT
4.8 EXIT SETUP
EXTERNAL MEMORY MEDIA OPERATION (USB&SD/MMC
CARD)
2.1 DOWNMIX
Lt/Rt
Stereo
2.2 EXIT SETUP
Prepare the player for External Memory media operation
1. Slide the POWER switch to ON position, plug a USB data
traveller filled with Audio/video files into the USB port or
Insert the SD/MMC card with the label side facing up into
the card slot, the USB or the SD/MMC card is successfully
detected and read after a few seconds, at the same time,
the TV screen will show all its folders.
2. You may play the files stored in the storage media much in
the same way as you do the Mp3 disc.
Note: Press and hold STOP button to make change among
Dvd, Mcr (Media Card Reader) and Usb.
Options: - Left/Right mix mode
- Select this option if you don't have a 5.1
channels amplifier.
- It is used to exit the setup menu.
INITIAL SETTINGS
Initial settings page is for you to make your preferred settings
up for your player. Once the initial settings are done they are
retained in the CPU of the player until otherwise modified.
1. Press SETUP button.
2. Use the navigation buttons to select the item you want to
modify, press OK(PLAY/PAUSE) button to confirm, setting
page with further setting items displayed shows on the TV
screen. Again use navigation buttons to make changes.
Press again OK(PLAY/PAUSE) button to confirm
modifications.
3. Use navigation buttons to switch to another setting on the
main setting page.
4. Press SETUP button to exit main setting page.
COMMON PROCEDURES FOR INITIAL SETTINGS
1. GENERAL SETUP
2. AUDIO SETUP
3. VIDEO QUALITY SETUP
1.1 TV DISPLAY
1.2 LCD MODE
1.3 OSD LANGUAGE
1.4 SCREEN SAVER
1.5 EXIT SETUP
- it is used to select the TV scan mode,
please set as per your TV set.
Options: Normal/Ps
Normal Lb
Wide
- it is used to select the LCD mode.
Options: 4:3 16:9
- it is used to select different On
Screen Display language for different user.
- when the player is not in used for
several minutes, a running DVD logo will move across the TV
screen to protect the TV screen.
Options: On: Screen saver is enabled
Off: Screen saver is disabled
- It is used to exit the setup menu.
3.1 BRIGHTNESS
3.2 CONTRAST
3.3 HUE
3.4 SATURATION
3.5 EXIT SETUP
- to set the brightness for display.
- to set the contrast effect for display.
- to set the hue for display.
- to set the saturation for display.
- It is used to exit the setup menu.
GB-4
