457480
4
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
Model No. CL-1482
INSTRUCTION MANUAL
GEBRUIKERSHANDLEIDING
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUAL DE INSTRUCCIONES
MANUAL DE INSTRUÇÕES
1. AM/FM BAND BUTTON
2. >>| / Y-M-D / DST BUTTON
3. SNOOZE / SLEEP BUTTON
4. ALARM SET BUTTON
5. ON / OFF BUTTON
6. |<< / TEMP / °C/°F BUTTON
7. ALARM 1 RADIO / BUZZ BUTTON
8. ALARM 2 RADIO / BUZZ BUTTON
9. MODE BUTTON
10. LED DISPLAY
11. RESET BUTTON
12. DISPLAY AUTO OFF / LOW / HIGH DIMMER
13. AC POWER CORD
14. TEMPERATURE SENSOR (IN DOOR)
15. FM ANTENNA
16. INFRARED SENSOR
17. LINE IN JACK
18. VOLUME KNOB
19. TUNE KNOB
20. SPEAKER
21. RATING LABEL
22. BATTERY DOOR
POWER CONNECTION
Plug the AC power cord to a household outlet AC source. This unit is equipped with a battery back up
system, it requires a 3V CR2032 flat lithium battery (not included). Insert the battery in the battery
compartment, making certain that the positive and negative (+ and -) battery terminals are attached to the
corresponding terminals on the plate in the battery compartment. If an AC power failure occurs, the clock
automatically switches to the battery power supply, the clock and timer memory continue running. When
the AC power resumes, the clock switches back to AC again.
1. TIME AND CALENDAR SETTING
A. Setting Time and Calendar – press mode set button (9) in normal mode and keep depress over 2
seconds to enter time set mode, after enter the setting mode, press mode set button (9) to change
the mode cycle as follows.
Normal
g Year g Month g Day g 12/24 H g RTC Hour g RTC Min g Normal
Action (during data adjustment):
- Press |<< / TEMP / °C / °F button (6) to adjust data backward
- Press >>| / Y-M-D / DST button (2) to adjust data forward
- Keep depress |<< or >>| button for 2 seconds to enable auto forward.
B. Setting Alarm 1 and Alarm 2 – press alarm set button (4) during normal mode and keep depress
over 2 seconds to enter alarm set mode, after enter the setting mode, press alarm set button (4) to
change the mode cycle as follows :
Normal
g AL 1 Hour g AL 1 Min g AL 1 weekend Alarm g AL 2 Hour g AL 2 Min g AL 2 weekend alarm
g Normal
ENGLISH
Action (during data adjustment):
- Press |<< / TEMP / °C / °F button (6) to adjust data backward
- Press >>| / Y-M-D / DST button (2) to adjust data backward
- Keep depress |<< or >>| button for 2 seconds to enable auto forward.
2. SETTING ALARM OUTPUT AND ALARM ON/OFF
A. Change the alarm output
Press AL 1 (7) / AL 2 (8) button to Music position to select wake up by Radio, set to Buzzer
position to select wake up by Buzzer, set to Alarm off position to disable all alarm.
Select the Display Auto Off / Low / High dimmer switch (12) to the Auto off Mode. Alarm wake up the
time display is auto turn on.
3. ALARM DURATION AND SNOOZE FUNCTION
Alarm Duration – Buzzer alarm or radio alarm will continue output for 30 minutes if no key press, then
it will stop automatically and wait for same alarm time on next day.
Action for Snooze:
- During alarming, press Snooze / Sleep button (3) will enable snooze function, Buzzer alarm or Radio
alarm will stop.
- Snooze interval is 9 minute (not include second offset)
- Snooze will continue unless press On / Off button (5) to alarm off of Buzzer alarm or Radio alarm stop
automatically after 30 minutes.
- Select the Display Auto Off / Low / High dimmer switch (12) to the auto off mode. During alarming
display auto turn on. Press Snooze / Sleep button (3) will enable snooze function, buzzer alarm or
radio / display will stop & off.
4. CHANGE DISPLAY CONTENT
A. Press >>| / Y-M-D / DST button (2) during normal can switch to display YEAR / MONTH / DAY, after
5 seconds timeout and return back to display time.
B. Press |<< / TEMP / °C / °F button (6) during normal can switch to display in door temperature, after
5 second timeout and return back to display time.
C. Press |<< / TEMP / °C / °F button during normal can switch to display in door temperature and hold
for 3 seconds change temperature unit °C / °F
5. SLEEP FUNCTION
During radio on mode, press Snooze / Sleep button (3) to turn on Sleep mode, the sleep time will keep
flashing by 5 second, within 5 seconds and press Sleep button can change the duration from 90 min
15 min. Press On/Off button (5) to cancel sleep function.
DST Daylight saving time
Press >>| / Y-M-D / DST button and hold for 3 seconds to toggle on and off DST function. (For one hour
summer & winter time difference)
RADIO OPERATION
- Press the On / Off button (5) to turn radio on.
- Select AM/FM band press the AM/FM band button (1).
- Select the station using the Tune knob (19).
- Turn the volume knob (18) to adjust volume as required.
- Press the On / Off button (5) to turn radio off.
Note:
- The AM band use an internal directional aerial, rotate the radio for best reception.
- Ensure that the FM antenna (15) is completely unrolled and extended for best FM reception.
RESET
- The reset button (11) is located on the back of unit. Use a ballpoint pen to press it whenever you
change the batteries, or unit is not performing as expected. This will return all settings to default value,
and you will lose any stored data (alarm and clock settings).
INFRARED SENSOR FUNCTION
1. The radio Off mode, infrared display in door temperature
- Hand on top of sensor (16) within 1 second to show the in door temperature
2. The radio On mode, use the infrared sensor to turn sleep function On
- Hand on top of sensor (16) within 2 seconds to turn the sleep on, the word ‘Slp’
showing on the LED display. Sleep time from 10-90 minutes. (Refer to page 4 for
require sleep time adjustment). Press On/Off button (5) to cancel sleep function.
3. The alarm On mode, use the infrared sensor to turn snooze function On
- Hand on top of sensor (16) within 1 second snooze off for 9 minutes.
4. The radio On mode, use the infrared display radio frequency and in door temperature
- Hand on top of sensor (16) within 1 second to
show the indoor temperature
- Hand on top of sensor (16) within 1 second to
show the radio frequency.
5. The radio OFF mode, select the Display Auto Off / Low / High dimmer switch
(12) to the auto off mode, the time display will automatically off in 15 seconds.
- Hand on top of sensor (16) within 1 second to turn the display on.
- Press all key button to turn display on.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Audiosonic CL-1482 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Audiosonic CL-1482 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 1,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info